• Prothane Suspension Control Arm Bushing
1 1

Prothane

Prothane Suspension Control Arm Bushing for 1989-1998 Nissan 240SX, SKU 0UKEW

Prothane Suspension Control Arm Bushing for 1989-1998 Nissan 240SX, SKU 0UKEW

$21.17 USD
$57.66 USD $21.17 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships directly from the warehouse to you
  • Tracking emailed when it ships
  • Free fitment check before you order

More for your vehicle:240SX S13 & S14 Coilovers & SuspensionAll Nissan parts

Listed for: 1989-1998 Nissan 240SX, SKU 0UKEWFitment notes & questions

This Prothane control arm bushing (catalog SKU 0UKEW) is listed for the 1989-1998 Nissan 240SX. The control arm is what holds the wheel in position, and the bushings at its inner pivots decide how much it can shift under load. Fresh bushings are an affordable way to firm up an older car that knocks over bumps or drifts off line when you brake. It is a good match for street cars and older vehicles where the steering has gone vague or clunky. If the car clunks over bumps or pulls and wanders under braking, the control arm bushings are one of the first places to look.

Key features

  • Prothane control arm bushing, sold under SKU 0UKEW
  • An inexpensive fix for clunks over bumps and wandering under braking
  • Well suited to older cars whose original bushings have worn out
  • Listed for 3 applications from Nissan, model years 1989 to 1998

Fitment

  • 1989-1998 Nissan 240SX Base, SE
  • 1991-1998 Nissan 240SX LE
  • 1989-1990 Nissan 240SX XE

Check your year, trim and drivetrain against the list above before ordering.

Install notes

Where your vehicle uses pressed-in bushings, you will need a press to fit them, or a shop that has one.

Questions & answers

No questions yet. Ask about fitment, ride height or what's in the box and we'll answer by email.

View full details

Before you order: Nissan 240SX, SKU 0UKEW fitment and setup

Bushings are one of the cheapest ways to tighten up an older car. This Prothane kit replaces the factory rubber on the Nissan 240SX, SKU 0UKEW.

Fitment notes

  • Listed for: 1989-1998 Nissan 240SX, SKU 0UKEW.
  • Model years: 1989-1998. Check your car's year falls inside this range.
  • Specs, lead time and warranty come from Prothane and can change. The details above this guide are the latest we have.

Not sure it fits? Tell us exactly what you drive and we'll confirm fitment with the supplier first. It's free and saves a return.

Ask about fitment

Plan the whole job

  • An alignment after installing new arms or bushings.
  • Matching parts at the other end. Upgrading one side or one link and leaving worn parts elsewhere limits the improvement.
  • Install tools. Pressed-in bushings may need a press or a shop to fit them.

More for your car: 240SX S13 & S14 Coilovers & Suspension · Nissan Coilovers & Suspension · All Bushings & Mounts

Questions about Nissan 240SX, SKU 0UKEW bushings

Will this fit my Nissan 240SX, SKU 0UKEW?
It is listed for the 1989-1998 Nissan 240SX, SKU 0UKEW. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing this?
If the part changes or affects suspension geometry, yes. It is a good idea after any arm, link or bushing change.
Can I install it myself?
Many bolt-on parts can be installed at home with the right tools and a safe way to support the car. Pressed bushings and anything you are unsure about are best left to a shop.
Where do specs and warranty details come from?
From Prothane. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.
More parts for the 240SX S13 & S14
Shop all 240SX S13 & S14 parts240SX S13 & S14 Coilovers & SuspensionControl Arm BushingsNissan Coilovers & SuspensionBushings & MountsAll Prothane Polyurethane Bushings