SuperPro Front Control Arm Bushing Kit for 1960-1980 Triumph Spitfire, Herald, GT6 and TVR Tuscan

If the control arm bushings on your car have gone soft, this SuperPro front control arm bushing kit is the matching replacement for the 1963-1980 Triumph Spitfire, 1960-1970 Herald, 1967-1973 GT6 and 1967-1971 TVR Tuscan. The control arm bushings decide how precisely the wheel is located. Fresh bushings keep camber and toe closer to where the alignment was set, especially under braking and cornering loads. It suits owners refreshing a classic for regular street use.

Control arm bushings are the pivot points that let the arm move up and down while holding the wheel in position. Once they wear, alignment can shift under load and the car may wander, tramline or clunk.

If you are already replacing worn parts in this area, it is a good time to inspect the surrounding bushings and hardware too, since they usually age at the same rate.

Key features

• Front-position part
• Listed for 4 year and trim groups

Fitment

• 1967-1973 Triumph GT6 Base
• 1960-1970 Triumph Herald Base
• 1963-1980 Triumph Spitfire Base
• 1967-1971 TVR Tuscan Base

Check your year, trim and drivetrain against the list above before ordering.

Install notes

Expect to use a press, or have a shop do the job, because pressed-in bushings do not go in by hand.