LowerHQ

LowerHQ BMW E30 E36 E46 Z3 Z4 Rear Upper Shock Mount Kit, 85A Polyurethane, 3mm Steel Plates

Q: Who do I contact with questions?

Contact us with your vehicle details and we will check with the supplier.

$77.99 USD

Sale Out of stock

Shipping calculated at checkout.

Color Only Mounts Only Gasket Mounts and Gasket

Ships directly from the warehouse to you
Ships from an overseas warehouse, estimated delivery 6-15 days
Tracking emailed when it ships
Free fitment check before you order

More for your vehicle:BMW E36 Coilovers & Suspension All BMW parts

Listed for: BMW E30 E36Fitment notes & questions

This rear upper shock mounting kit addresses the sheet metal on top of the rear shock towers in E30, E36, E46, Z3 and Z4 BMWs, which can tear over time.

Steel reinforcement plates and 85A polyurethane mounts stop deflection and the knocking caused by worn rubber mounts. It suits street cars with upgraded shocks.

Fitment

BMW E30 318/323/325 1986-1991
BMW E36 323/325/328/M3 1992-1999
BMW E46 323/325/328/330/M3 1999-2006 (not convertible)
BMW Z3 E36/8 1996-2003
BMW Z4 E85 2003-2008 (not convertible)
Not for E36/E46 318ti
The 10mm sleeve suits factory shocks. Measure aftermarket shocks before ordering.

Key specs

Material: high-strength steel, polyurethane, aluminum
Hardness: 85A
Reinforcement plates: 3mm high-strength steel
Shock shaft diameter: 10mm
NVH increase: low to medium
Recommended use: street
Options: mounts only, gaskets only, or mounts and gaskets

Features

Eliminates deflection of the factory rear shock mounts under load
Polyurethane resists compression, aging and wear
Steel plates reinforce the shock tower
Keeps the rear shock in position and removes rear-end knocking

Install notes

Grease the polyurethane bushings during installation.
On some E30 M3 models, factory seam sealant may stop the plate from sitting flat, and the plate may need modifying.

Professional installation and a wheel alignment are recommended.

Questions & answers

No questions yet. Ask about fitment, ride height or what's in the box and we'll answer by email.

View full details

About this damper set for the BMW E30 E36

This LowerHQ part is listed for the BMW E30 E36. Below are fitment notes, what usually goes with it, and answers to common questions.

Fitment notes

Listed for: BMW E30 E36.
Specs, lead time and warranty come from LowerHQ and can change. The details above this guide are the latest we have.

Not sure it fits? Send us your year, make, model, trim and drivetrain and we'll check with the supplier before you order.

Ask about fitment

What else to plan for

An alignment after any suspension change.
Supporting hardware. Old bolts are often seized, so have new hardware on hand.

More for your car: BMW E36 Coilovers & Suspension · BMW Coilovers & Suspension · All Coilovers

Questions about BMW E30 E36 shocks and struts

Will this fit my BMW E30 E36?

It is listed for the BMW E30 E36. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.

Do I need an alignment after installing this?

An alignment is a good idea after any suspension change.

Who do I contact with questions?

Where do specs and warranty details come from?

From LowerHQ. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.

More parts for the BMW E36

Shop all BMW E36 parts BMW E36 Coilovers & Suspension BMW E46 Coilovers & Suspension BMW Coilovers & Suspension Bushings & Mounts