Skip to product information
1 of 2

SuperPro

SuperPro Rear Trailing Arm Bushing Kit for 1985-1994 Subaru DL, GL, GL-10, Loyale, RX and XT

SuperPro Rear Trailing Arm Bushing Kit for 1985-1994 Subaru DL, GL, GL-10, Loyale, RX and XT

Regular price $86.99 USD
Regular price Sale price $86.99 USD
Sale Out of stock
Shipping calculated at checkout.
Quantity
  • Ships directly from the warehouse to you
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: 1985-1994 Subaru DL, GL, GL-10, Loyale, RX and XTFitment notes & questions

The SuperPro Rear Trailing Arm Bushing Kit is a replacement bushing set for the 1985-1994 Subaru DL, GL, Loyale, RX and XT. Trailing arm bushings locate the rear wheels front to rear, which affects stability under braking, acceleration and over bumps. It suits owners using the car for daily commuting and spirited street driving, and it is a natural fit for a refresh or restoration of an older car.

As rubber ages it cracks and softens, letting parts move in ways the suspension was never meant to allow. Fitting a fresh trailing arm bushing set helps a Subaru DL feel settled again, and it makes sense to do whenever that corner is already apart.

Key features

  • Rear-position trailing arm bushing kit
  • Listed for 11 year and trim combinations, summarized below

Fitment

  • 1985-1989 Subaru DL
  • 1985-1989 Subaru GL (Turbo)
  • 1985-1989 Subaru GL-10 (Turbo)
  • 1990-1994 Subaru Loyale (RS Turbo, Turbo, RS)
  • 1985-1989 Subaru RX (Turbo)
  • 1985-1991 Subaru XT (DL, GL, GL-10, GL-10 Turbo, XT6)

Check your year, trim and drivetrain against the list above before ordering.

Install notes

Pressed-in bushings may need a press to install, so plan on having a shop fit them if you do not have one.

Questions & answers

No questions yet. Ask about fitment, ride height or what's in the box and we'll answer by email.

View full details

SuperPro bushings for your Subaru DL, GL, GL-10, Loyale, RX and XT: what to know

If the car feels loose, clunks over bumps or wanders under braking, tired bushings are a common cause on a Subaru DL, GL, GL-10, Loyale, RX and XT with some age on it.

Fitment notes

  • Listed for: 1985-1994 Subaru DL, GL, GL-10, Loyale, RX and XT.
  • Model years: 1985-1994. Check your car's year falls inside this range.
  • Specs, lead time and warranty come from SuperPro and can change. The details above this guide are the latest we have.

Not sure it fits? Message us your car's details and we'll double-check fitment with the supplier before you buy.

Ask about fitment

Parts that usually go with it

  • An alignment after installing new arms or bushings.
  • Matching parts at the other end. Upgrading one side or one link and leaving worn parts elsewhere limits the improvement.
  • Install tools. Pressed-in bushings may need a press or a shop to fit them.

More for your car: Subaru Coilovers & Suspension · All Bushings & Mounts

Questions about Subaru DL, GL, GL-10, Loyale, RX and XT bushings

Will this fit my Subaru DL, GL, GL-10, Loyale, RX and XT?
It is listed for the 1985-1994 Subaru DL, GL, GL-10, Loyale, RX and XT. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing this?
If the part changes or affects suspension geometry, yes. It is a good idea after any arm, link or bushing change.
Can I install it myself?
Many bolt-on parts can be installed at home with the right tools and a safe way to support the car. Pressed bushings and anything you are unsure about are best left to a shop.
Where do specs and warranty details come from?
From SuperPro. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.