• SuperPro Rear Spring Front Eye Bushing Kit for 1958-1970 Austin Healey Sprite (Base, MK II, MK IV)
  • SuperPro Rear Spring Front Eye Bushing Kit for 1958-1970 Austin Healey Sprite (Base, MK II, MK IV), view 2
1 2

SuperPro

SuperPro Rear Spring Front Eye Bushing Kit for 1958-1970 Austin Healey Sprite (Base, MK II, MK IV)

SuperPro Rear Spring Front Eye Bushing Kit for 1958-1970 Austin Healey Sprite (Base, MK II, MK IV)

$69.99 USD
$69.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships directly from the warehouse to you
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: 1958-1970 Austin Healey SpriteFitment notes & questions

This kit renews the bushings in the front eye of the rear springs on the 1958-1970 Austin Healey Sprite. It suits Sprite restorations, weekend drivers and vintage racers.

Springs carry the vehicle's weight and set its ride height, so the parts that locate them deserve attention as they age. Worn spring bushings let the axle shift, which can show up as a clunk when pulling away, a squeak over bumps or vague handling. Fresh bushings help keep the rear axle square under the vehicle, which matters most when it is loaded. Spring bushings are often replaced at the same time as shackles or springs, since the hardware is already apart. Leaf springs mount to the vehicle through bushings at the spring eye and the shackle, and those bushings let the spring flex as it carries load. The fitment information below is the place to confirm compatibility.

Key features

  • Rear suspension application
  • Fits the front eye of the rear spring

Fitment

  • 1958-1967 Austin Healey Sprite Base
  • 1961 Austin Healey Sprite MK II
  • 1966-1970 Austin Healey Sprite MK IV

Check your year, trim and drivetrain against the list above before ordering.

Install notes

Expect to need a press, or help from a shop, to fit pressed-in bushings.

Questions & answers

No questions yet. Ask about fitment, ride height or what's in the box and we'll answer by email.

View full details

SuperPro bushings for your Austin Healey Sprite: what to know

Bushings are one of the cheapest ways to tighten up an older car. This SuperPro kit replaces the factory rubber on the Austin Healey Sprite.

Fitment notes

  • Listed for: 1958-1970 Austin Healey Sprite.
  • Model years: 1958-1970. Check your car's year falls inside this range.
  • Specs, lead time and warranty come from SuperPro and can change. The details above this guide are the latest we have.

Not sure it fits? Tell us exactly what you drive and we'll confirm fitment with the supplier first. It's free and saves a return.

Ask about fitment

Parts that usually go with it

  • An alignment after installing new arms or bushings.
  • Matching parts at the other end. Upgrading one side or one link and leaving worn parts elsewhere limits the improvement.
  • Install tools. Pressed-in bushings may need a press or a shop to fit them.

More for your car: Bushings & Mounts · All Bushings & Mounts

Questions about Austin Healey Sprite bushings

Will this fit my Austin Healey Sprite?
It is listed for the 1958-1970 Austin Healey Sprite. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing this?
If the part changes or affects suspension geometry, yes. It is a good idea after any arm, link or bushing change.
Can I install it myself?
Many bolt-on parts can be installed at home with the right tools and a safe way to support the car. Pressed bushings and anything you are unsure about are best left to a shop.
Where do specs and warranty details come from?
From SuperPro. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.
More parts for this car
Bushings & Mounts