• SuperPro Rear Panhard Rod Bushing Kit for 1990-1995 Toyota 4Runner SR5
  • SuperPro Rear Panhard Rod Bushing Kit for 1990-1995 Toyota 4Runner SR5, view 2
1 2

SuperPro

SuperPro Rear Panhard Rod Bushing Kit for 1990-1995 Toyota 4Runner SR5

SuperPro Rear Panhard Rod Bushing Kit for 1990-1995 Toyota 4Runner SR5

$39.99 USD
$39.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships directly from the warehouse to you
  • Tracking emailed when it ships
  • Free fitment check before you order

More for your vehicle:Toyota Tacoma & 4Runner SuspensionAll Toyota parts

Listed for: 1990-1995 Toyota 4Runner SR5Fitment notes & questions

If the Panhard rod bushings on your car have gone soft, this SuperPro rear panhard rod bushing kit is the matching replacement for the 1990-1995 Toyota 4Runner SR5. The Panhard rod, also called a track bar, ties the axle to the frame sideways. Fresh bushings help keep the axle centered over bumps and in turns. It suits daily driving as well as off-road and towing duty.

A Panhard rod keeps the rear axle centered side to side under the body. Its bushings take lateral loads, so wear lets the axle shift and the rear can feel vague when changing direction.

If you are already replacing worn parts in this area, it is a good time to inspect the surrounding bushings and hardware too, since they usually age at the same rate.

Key features

  • Rear-position part
  • Designed as an upgrade over the original rubber bushings
  • Intended to run quieter and outlast rubber

Fitment

  • 1990-1995 Toyota 4Runner SR5

Check your year, trim and drivetrain against the list above before ordering.

Install notes

Expect to use a press, or have a shop do the job, because pressed-in bushings do not go in by hand.

Questions & answers

No questions yet. Ask about fitment, ride height or what's in the box and we'll answer by email.

View full details

Before you order: Toyota 4Runner SR5 fitment and setup

Bushings are one of the cheapest ways to tighten up an older car. This SuperPro kit replaces the factory rubber on the Toyota 4Runner SR5.

Fitment notes

  • Listed for: 1990-1995 Toyota 4Runner SR5.
  • Model years: 1990-1995. Check your car's year falls inside this range.
  • Specs, lead time and warranty come from SuperPro and can change. The details above this guide are the latest we have.

Not sure it fits? Tell us exactly what you drive and we'll confirm fitment with the supplier first. It's free and saves a return.

Ask about fitment

Plan the whole job

  • An alignment after installing new arms or bushings.
  • Matching parts at the other end. Upgrading one side or one link and leaving worn parts elsewhere limits the improvement.
  • Install tools. Pressed-in bushings may need a press or a shop to fit them.

More for your car: Toyota Tacoma & 4Runner Suspension · Toyota Coilovers & Suspension · All Bushings & Mounts

Questions about Toyota 4Runner SR5 bushings

Will this fit my Toyota 4Runner SR5?
It is listed for the 1990-1995 Toyota 4Runner SR5. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing this?
If the part changes or affects suspension geometry, yes. It is a good idea after any arm, link or bushing change.
Can I install it myself?
Many bolt-on parts can be installed at home with the right tools and a safe way to support the car. Pressed bushings and anything you are unsure about are best left to a shop.
Where do specs and warranty details come from?
From SuperPro. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.
More parts for the Toyota Tacoma & 4Runner
Shop all Toyota Tacoma & 4Runner partsToyota Tacoma & 4Runner SuspensionToyota Coilovers & SuspensionBushings & Mounts