• SuperPro Rear Panhard Rod Bushing Kit
  • SuperPro Rear Panhard Rod Bushing Kit, view 2
1 2

SuperPro

SuperPro Rear Panhard Rod Bushing Kit, 1959-1968 Volvo 122 and 1961-1973 Volvo 1800, SKU 031DF

SuperPro Rear Panhard Rod Bushing Kit, 1959-1968 Volvo 122 and 1961-1973 Volvo 1800, SKU 031DF

$26.99 USD
$26.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships directly from the warehouse to you
  • Tracking emailed when it ships
  • Free fitment check before you order

More for your vehicle:All Volvo parts

Listed for: Volvo 1800, SKUFitment notes & questions

This SuperPro kit fits the rear panhard rod on the classic Volvo 122 and 1800. With the original bushings now decades old, the rear axle can drift sideways in corners and clunk over bumps. A new set firms up the rear location for a road-going classic, a concours restoration or a historic race car.

Key features

  • Rear panhard rod bushings
  • Positioned by SuperPro as quieter and longer lasting than rubber
  • Covers Volvo 122 S and Base, plus 1800 Base, S, E and ES
  • Store SKU 031DF

Fitment

  • 1959-1968 Volvo 122 S, Base
  • 1961-1968 Volvo 1800 Base
  • 1969-1973 Volvo 1800 E
  • 1972-1973 Volvo 1800 ES
  • 1964-1969 Volvo 1800 S

Check your year, trim and drivetrain against the list above before ordering.

Install notes

Fitting means pressing the bushings in, so a press or shop is helpful.

Questions & answers

No questions yet. Ask about fitment, ride height or what's in the box and we'll answer by email.

View full details

Before you order: Volvo 1800, SKU fitment and setup

Bushings are one of the cheapest ways to tighten up an older car. This SuperPro kit replaces the factory rubber on the Volvo 1800, SKU.

Fitment notes

  • Listed for: Volvo 1800, SKU.
  • Model years: 1959-1968. Check your car's year falls inside this range.
  • Specs, lead time and warranty come from SuperPro and can change. The details above this guide are the latest we have.

Not sure it fits? Tell us exactly what you drive and we'll confirm fitment with the supplier first. It's free and saves a return.

Ask about fitment

Plan the whole job

  • An alignment after installing new arms or bushings.
  • Matching parts at the other end. Upgrading one side or one link and leaving worn parts elsewhere limits the improvement.
  • Install tools. Pressed-in bushings may need a press or a shop to fit them.

More for your car: Volvo Coilovers & Suspension · All Bushings & Mounts

Questions about Volvo 1800, SKU bushings

Will this fit my Volvo 1800, SKU?
It is listed for the Volvo 1800, SKU. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing this?
If the part changes or affects suspension geometry, yes. It is a good idea after any arm, link or bushing change.
Can I install it myself?
Many bolt-on parts can be installed at home with the right tools and a safe way to support the car. Pressed bushings and anything you are unsure about are best left to a shop.
Where do specs and warranty details come from?
From SuperPro. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.
More parts for the Volvo
Shop all Volvo partsVolvo Coilovers & SuspensionBushings & Mounts