• SuperPro Rear Control Arm Lower-Outer Bushing Kit for 1990-2005 Mazda Miata
  • SuperPro Rear Control Arm Lower-Outer Bushing Kit for 1990-2005 Mazda Miata, view 2
1 2

SuperPro

SuperPro Rear Control Arm Lower-Outer Bushing Kit for 1990-2005 Mazda Miata

SuperPro Rear Control Arm Lower-Outer Bushing Kit for 1990-2005 Mazda Miata

$69.99 USD
$69.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships directly from the warehouse to you
  • Tracking emailed when it ships
  • Free fitment check before you order

More for your vehicle:Miata MX-5 Coilovers & SuspensionAll Mazda parts

Listed for: 1990-2005 Mazda MiataFitment notes & questions

Built for the 1990-2005 Mazda Miata, this SuperPro rear control arm lower-outer bushing kit renews a key suspension pivot. Every control arm pivots on its bushings, so their condition shows up in steering feel, braking stability and noise. It is aimed at spirited road driving as well as weekend track or autocross use.

As rubber ages it cracks and softens, letting parts move in ways the suspension was never meant to allow. Fitting a fresh control arm lower-outer bushing set helps a Mazda Miata feel settled again, and it makes sense to do whenever that corner is already apart.

If your Mazda Miata knocks over broken pavement or feels less precise than it used to, a worn control arm lower-outer bushing set is one of the usual suspects. Replacing it takes slack out of the system without changing the rest of the suspension.

Key features

  • Control arm lower-outer bushing kit for the rear suspension
  • Covers 9 listed applications across the models below

Fitment

  • 1990-2005 Mazda Miata (10th Anniversary, LE, LS, M Edition, Mazdaspeed, SE, Shinsen, STO)

Check your year, trim and drivetrain against the list above before ordering.

Install notes

These are pressed-in bushings, and fitting them may call for a press or a trip to a shop.

Questions & answers

No questions yet. Ask about fitment, ride height or what's in the box and we'll answer by email.

View full details

Before you order: Mazda Miata fitment and setup

Worn or soft bushings let the suspension move in ways it shouldn't. Fresh or firmer bushings on the Mazda Miata make steering and braking feel more precise.

Fitment notes

  • Listed for: 1990-2005 Mazda Miata.
  • Model years: 1990-2005. Check your car's year falls inside this range.
  • Specs, lead time and warranty come from SuperPro and can change. The details above this guide are the latest we have.

Not sure it fits? Send us your year, make, model, trim and drivetrain and we'll check with the supplier before you order.

Ask about fitment

Plan the whole job

  • An alignment after installing new arms or bushings.
  • Matching parts at the other end. Upgrading one side or one link and leaving worn parts elsewhere limits the improvement.
  • Install tools. Pressed-in bushings may need a press or a shop to fit them.

More for your car: Miata MX-5 Coilovers & Suspension · Mazda Coilovers & Suspension · All Bushings & Mounts

Questions about Mazda Miata bushings

Will this fit my Mazda Miata?
It is listed for the 1990-2005 Mazda Miata. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing this?
If the part changes or affects suspension geometry, yes. It is a good idea after any arm, link or bushing change.
Can I install it myself?
Many bolt-on parts can be installed at home with the right tools and a safe way to support the car. Pressed bushings and anything you are unsure about are best left to a shop.
Where do specs and warranty details come from?
From SuperPro. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.
More parts for the Miata MX-5
Shop all Miata MX-5 partsMiata MX-5 Coilovers & SuspensionMazda Coilovers & SuspensionControl Arm BushingsBushings & Mounts