• SuperPro Rear Beam Axle Pivot Bushing Kit
  • SuperPro Rear Beam Axle Pivot Bushing Kit, view 2
1 2

SuperPro

SuperPro Rear Beam Axle Pivot Bushing Kit for 2011-2014 Mazda 2, SKU 1JBM4

SuperPro Rear Beam Axle Pivot Bushing Kit for 2011-2014 Mazda 2, SKU 1JBM4

$153.99 USD
$153.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships directly from the warehouse to you
  • Tracking emailed when it ships
  • Free fitment check before you order

More for your vehicle:All Mazda parts

Listed for: 2011-2014 Mazda 2, SKU 1JBM4Fitment notes & questions

This SuperPro kit replaces the pivot bushings for the rear beam axle on the 2011-2014 Mazda 2, listed for the Sport, Touring, GX, GS and Yozora. The rear beam pivots on these bushings, so worn ones let the rear of the car shift in corners and over bumps, making it feel loose. New pivots tighten the rear end. The kit comes with two sizes of inner tube. A good fit for Mazda 2 owners on the street or autocross.

Key features

  • Pivot bushings for the rear beam axle
  • 16mm ID tubes for the Mazda 2
  • 12mm ID tubes for the Ford Fiesta also included
  • Rear position
  • Store SKU 1JBM4

Fitment

  • 2011-2014 Mazda 2 (Sport, Touring, GX, GS)
  • 2011 Mazda 2 (Yozora)

Check your year, trim and drivetrain against the list above before ordering.

What's included

  • Pivot bushings for the rear beam axle
  • 16mm ID tubes (Mazda 2)
  • 12mm ID tubes (Ford Fiesta)

Install notes

SuperPro notes that pressed-in bushings may need a press or a shop to fit. Use the 16mm ID tubes on the Mazda 2.

Questions & answers

No questions yet. Ask about fitment, ride height or what's in the box and we'll answer by email.

View full details

About this bushing kit for the Mazda 2, SKU 1JBM4

Bushings are one of the cheapest ways to tighten up an older car. This SuperPro kit replaces the factory rubber on the Mazda 2, SKU 1JBM4.

Fitment notes

  • Listed for: 2011-2014 Mazda 2, SKU 1JBM4.
  • Model years: 2011-2014. Check your car's year falls inside this range.
  • Specs, lead time and warranty come from SuperPro and can change. The details above this guide are the latest we have.

Not sure it fits? Tell us exactly what you drive and we'll confirm fitment with the supplier first. It's free and saves a return.

Ask about fitment

What else to plan for

  • An alignment after installing new arms or bushings.
  • Matching parts at the other end. Upgrading one side or one link and leaving worn parts elsewhere limits the improvement.
  • Install tools. Pressed-in bushings may need a press or a shop to fit them.

More for your car: Mazda Coilovers & Suspension ยท All Bushings & Mounts

Questions about Mazda 2, SKU 1JBM4 bushings

Will this fit my Mazda 2, SKU 1JBM4?
It is listed for the 2011-2014 Mazda 2, SKU 1JBM4. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing this?
If the part changes or affects suspension geometry, yes. It is a good idea after any arm, link or bushing change.
Can I install it myself?
Many bolt-on parts can be installed at home with the right tools and a safe way to support the car. Pressed bushings and anything you are unsure about are best left to a shop.
Where do specs and warranty details come from?
From SuperPro. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.
More parts for the Mazda
Shop all Mazda partsMazda Coilovers & SuspensionBushings & Mounts