• SuperPro Front Control Arm Upper-Inner Bushing Kit for 1988-1991 Honda Prelude
  • SuperPro Front Control Arm Upper-Inner Bushing Kit for 1988-1991 Honda Prelude, view 2
1 2

SuperPro

SuperPro Front Control Arm Upper-Inner Bushing Kit for 1988-1991 Honda Prelude

SuperPro Front Control Arm Upper-Inner Bushing Kit for 1988-1991 Honda Prelude

$147.99 USD
$147.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships directly from the warehouse to you
  • Tracking emailed when it ships
  • Free fitment check before you order

More for your vehicle:Honda Prelude Coilovers & SuspensionAll Honda parts

Listed for: 1988-1991 Honda PreludeFitment notes & questions

This SuperPro front control arm upper-inner bushing kit is listed for the 1988-1991 Honda Prelude. A control arm is only as precise as the bushings it pivots on. Worn ones let the arm deflect, which blurs steering feel, lets the car shimmy under hard braking and wears tires unevenly. It is a good fit for older cars being refreshed for regular street driving or weekend events. A worn pivot here often shows up first as a clunk when braking hard or pulling away. Replacing the bushings rather than the whole arm keeps the original arm in service. Original rubber at these pivots tends to crack and sag with age and mileage. Fresh bushings help the front end hold its alignment settings under load. Plan an alignment check after any suspension work in this area.

Key features

  • Position: front suspension
  • Part: Control Arm Upper-Inner Bushing
  • Product type: suspension control arm bushing kit

Fitment

  • Honda Prelude: 1988-1990 2.0 S; 1988-1991 2.0 Si; 1988-1989 2.0 Si 4WS; 1991 SE; 1990-1991 Si ALB, Si 4WS, Si; 1990 SR

Check your year, trim and drivetrain against the list above before ordering.

Questions & answers

No questions yet. Ask about fitment, ride height or what's in the box and we'll answer by email.

View full details

SuperPro bushings for your Honda Prelude: what to know

Worn or soft bushings let the suspension move in ways it shouldn't. Fresh or firmer bushings on the Honda Prelude make steering and braking feel more precise.

Fitment notes

  • Listed for: 1988-1991 Honda Prelude.
  • Model years: 1988-1991. Check your car's year falls inside this range.
  • Specs, lead time and warranty come from SuperPro and can change. The details above this guide are the latest we have.

Not sure it fits? Send us your year, make, model, trim and drivetrain and we'll check with the supplier before you order.

Ask about fitment

Parts that usually go with it

  • An alignment after installing new arms or bushings.
  • Matching parts at the other end. Upgrading one side or one link and leaving worn parts elsewhere limits the improvement.
  • Install tools. Pressed-in bushings may need a press or a shop to fit them.

More for your car: Honda Prelude Coilovers & Suspension · Honda Coilovers & Suspension · All Bushings & Mounts

Questions about Honda Prelude bushings

Will this fit my Honda Prelude?
It is listed for the 1988-1991 Honda Prelude. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing this?
If the part changes or affects suspension geometry, yes. It is a good idea after any arm, link or bushing change.
Can I install it myself?
Many bolt-on parts can be installed at home with the right tools and a safe way to support the car. Pressed bushings and anything you are unsure about are best left to a shop.
Where do specs and warranty details come from?
From SuperPro. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.
More parts for the Honda Prelude
Shop all Honda Prelude partsHonda Prelude Coilovers & SuspensionControl Arm BushingsHonda Coilovers & SuspensionBushings & Mounts