• SuperPro Front Control Arm Lower Bushing Kit for 2003-2012 Land Rover Range Rover
  • SuperPro Front Control Arm Lower Bushing Kit for 2003-2012 Land Rover Range Rover, view 2
1 2

SuperPro

SuperPro Front Control Arm Lower Bushing Kit for 2003-2012 Land Rover Range Rover

SuperPro Front Control Arm Lower Bushing Kit for 2003-2012 Land Rover Range Rover

$111.99 USD
$111.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships directly from the warehouse to you
  • Tracking emailed when it ships
  • Free fitment check before you order

More for your vehicle:All Land Rover parts

Listed for: 2003-2012 Land Rover Range RoverFitment notes & questions

This SuperPro kit renews the lower bushings of the front control arm on the 2003-2012 Land Rover Range Rover. On this heavy SUV the front lower arms take braking and cornering loads, and worn bushings are behind a lot of the clunks and vague steering older Range Rovers develop. It is a solid choice for owners keeping a high-mileage example sharp on and off the pavement.

Every time you brake, accelerate or turn, the control arm bushings take the load and decide how much the wheel moves out of place. Once they are tired, the result is vague steering, uneven tire wear and a clunk over potholes. A fresh bushing is a low-cost way to bring back the precision the car had when new, and often a little more.

Key features

  • Fits the front of the vehicle
  • Part type: suspension control arm bushing kit

Fitment

  • 2011-2012 Land Rover Range Rover (Autobiography)
  • 2003-2012 Land Rover Range Rover (Base, HSE)
  • 2012 Land Rover Range Rover (HSE Lux)
  • 2006-2012 Land Rover Range Rover (Supercharged)
  • 2008 Land Rover Range Rover (Westminster Edition)

Check your year, trim and drivetrain against the list above before ordering.

Install notes

These are pressed-in bushings, so you may need a hydraulic press or a shop to install them.

Questions & answers

No questions yet. Ask about fitment, ride height or what's in the box and we'll answer by email.

View full details

Before you order: Land Rover Range Rover fitment and setup

If the car feels loose, clunks over bumps or wanders under braking, tired bushings are a common cause on a Land Rover Range Rover with some age on it.

Fitment notes

  • Listed for: 2003-2012 Land Rover Range Rover.
  • Model years: 2003-2012. Check your car's year falls inside this range.
  • Specs, lead time and warranty come from SuperPro and can change. The details above this guide are the latest we have.

Not sure it fits? Message us your car's details and we'll double-check fitment with the supplier before you buy.

Ask about fitment

Plan the whole job

  • An alignment after installing new arms or bushings.
  • Matching parts at the other end. Upgrading one side or one link and leaving worn parts elsewhere limits the improvement.
  • Install tools. Pressed-in bushings may need a press or a shop to fit them.

More for your car: Land Rover Coilovers & Suspension ยท All Bushings & Mounts

Questions about Land Rover Range Rover bushings

Will this fit my Land Rover Range Rover?
It is listed for the 2003-2012 Land Rover Range Rover. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing this?
If the part changes or affects suspension geometry, yes. It is a good idea after any arm, link or bushing change.
Can I install it myself?
Many bolt-on parts can be installed at home with the right tools and a safe way to support the car. Pressed bushings and anything you are unsure about are best left to a shop.
Where do specs and warranty details come from?
From SuperPro. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.
More parts for the Land Rover
Shop all Land Rover partsLand Rover Coilovers & SuspensionControl Arm BushingsBushings & Mounts