• SuperPro Rear Lower Control Arm Set TRC1148 for 2004-2009 Mazda 3
  • SuperPro Rear Lower Control Arm Set TRC1148 for 2004-2009 Mazda 3, view 2
  • SuperPro Rear Lower Control Arm Set TRC1148 for 2004-2009 Mazda 3, view 3
1 3

SuperPro

SuperPro Rear Lower Control Arm Set TRC1148 for 2004-2009 Mazda 3

SuperPro Rear Lower Control Arm Set TRC1148 for 2004-2009 Mazda 3

$120.99 USD
$120.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships directly from the warehouse to you
  • Tracking emailed when it ships
  • Free fitment check before you order

More for your vehicle:Mazda 3 Coilovers & SuspensionAll Mazda parts

Listed for: 2004-2009 Mazda 3Fitment notes & questions

TRC1148 is a set of rear lower control arms for the 2004-2009 Mazda 3, replacing the factory arms at the back of the car. It makes sense for Mazda 3 owners keeping a daily driver sharp and anyone building one for autocross.

Control arms locate the wheel and set its angle to the road, so their condition shows up directly in steering feel and tire wear. Bent, corroded or worn arms let the wheel move out of alignment under braking and cornering. Doing both sides of the axle together keeps the handling even from left to right. Use the fitment details below to confirm this is the right part for your vehicle.

Have a torque wrench and the factory service specifications on hand for the job. Fitment below is shown as the manufacturer supplies it, so take a moment to compare it with your vehicle. Replacing worn suspension parts on both sides at once keeps the vehicle behaving the same left to right.

Key features

  • Rear suspension application
  • Manufacturer part number TRC1148
  • Rear lower control arm set

Fitment

  • 2004-2009 Mazda 3

Check your year, trim and drivetrain against the list above before ordering.

Install notes

Have the wheel alignment checked after the new arms are installed.

Questions & answers

No questions yet. Ask about fitment, ride height or what's in the box and we'll answer by email.

View full details

SuperPro suspension arms for your Mazda 3: what to know

Factory arms and their rubber bushings are built for stock ride height and comfort. Upgraded arms are how most modified Mazda 3s get alignment and feel dialed in.

Fitment notes

  • Listed for: 2004-2009 Mazda 3.
  • Model years: 2004-2009. Check your car's year falls inside this range.
  • Specs, lead time and warranty come from SuperPro and can change. The details above this guide are the latest we have.

Not sure it fits? Tell us exactly what you drive and we'll confirm fitment with the supplier first. It's free and saves a return.

Ask about fitment

Parts that usually go with it

  • An alignment after installing new arms or bushings.
  • Matching parts at the other end. Upgrading one side or one link and leaving worn parts elsewhere limits the improvement.
  • Install tools. Pressed-in bushings may need a press or a shop to fit them.

More for your car: Mazda 3 Coilovers & Suspension · Mazda Coilovers & Suspension · All Control Arms

Questions about Mazda 3 suspension arms

Will this fit my Mazda 3?
It is listed for the 2004-2009 Mazda 3. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing this?
If the part changes or affects suspension geometry, yes. It is a good idea after any arm, link or bushing change.
Can I install it myself?
Many bolt-on parts can be installed at home with the right tools and a safe way to support the car. Pressed bushings and anything you are unsure about are best left to a shop.
Where do specs and warranty details come from?
From SuperPro. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.
More parts for the Mazda 3
Shop all Mazda 3 partsMazda 3 Coilovers & SuspensionMazda Coilovers & SuspensionControl Arms