Prothane Suspension Control Arm Bushing for 1988-1991 Honda Civic and CRX, SKU 0UKJR

This Prothane control arm bushing is listed for the late-eighties Honda Civic and CRX, from the 1988 DX, LX and SE through the Wagovan, the RT 4WD and the CRX Si and HF. These cars are old enough that the factory bushings have usually gone soft, which shows up as a clunk over bumps or a car that drifts when you brake. Replacing them is an affordable way to make a street-driven Civic or CRX feel tight again.

Key features

• Prothane control arm bushing, catalogued as SKU 0UKJR
• Takes up the slack left by worn bushings so the control arm stays where it belongs
• Helps cure clunks over bumps and wandering under braking on older cars
• Listed for eight Civic and CRX applications between 1988 and 1991

Fitment

• 1989-1991 Honda Civic CX, Si
• 1988-1991 Honda Civic DX, RT 4WD, LX, Base
• 1990-1991 Honda Civic EX
• 1988 Honda Civic SE
• 1988-1989 Honda Civic Wagovan
• 1989-1991 Honda CRX Base
• 1988 Honda CRX DX
• 1988-1991 Honda CRX Si, HF

Check your year, trim and drivetrain against the list above before ordering.

Install notes

These bushings press into place, so you may need a hydraulic press or a shop to install them.