• Megan Racing Toe Arm Rear for Toyota C-HR 2018+ Steel-Alloy Powder Coated Hardened Rubber Bushings BoltOn 1-Year Warranty MRS-TY-1770-IV
1 1

Megan Racing

Megan Racing Toe Arm Rear for Toyota C-HR 2018+ Steel-Alloy Powder Coated Hardened Rubber Bushings BoltOn 1-Year Warranty MRS-TY-1770-IV

Megan Racing Toe Arm Rear for Toyota C-HR 2018+ Steel-Alloy Powder Coated Hardened Rubber Bushings BoltOn 1-Year Warranty MRS-TY-1770-IV

$168.00 USD
$168.00 USD $168.00 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

More for your vehicle:All Toyota parts

Listed for: Toyota C-HR 2018+ Steel-Alloy Powder Coated Hardened Rubber Bushings BoltOn 1-Year Warranty MRS-TY-1770-IVFitment notes & questions

This Megan Racing bushing kit is listed with its fitment details below. Bushings are a cheap way to tighten up an older car that clunks over bumps or wanders under braking.

Quick facts

  • Brand: Megan Racing
  • Position: Rear
  • Part number: MRS-TY-1770-IV

Details

  • Location: Rear Lower (Front)
  • Adjustment: Toe

Listed fitment

  • Toyota C-HR 2018+

Tip: Pressed-in bushings may need a press or a shop to fit.

View full details

Before you order: Toyota C-HR 2018+ Steel-Alloy Powder Coated Hardened Rubber Bushings BoltOn 1-Year Warranty MRS-TY-1770-IV fitment and setup

Worn or soft bushings let the suspension move in ways it shouldn't. Fresh or firmer bushings on the Toyota C-HR 2018+ Steel-Alloy Powder Coated Hardened Rubber Bushings BoltOn 1-Year Warranty MRS-TY-1770-IV make steering and braking feel more precise.

Fitment notes

  • Listed for: Toyota C-HR 2018+ Steel-Alloy Powder Coated Hardened Rubber Bushings BoltOn 1-Year Warranty MRS-TY-1770-IV.
  • Specs, lead time and warranty come from Megan Racing and can change. The details above this guide are the latest we have.

Not sure it fits? Send us your year, make, model, trim and drivetrain and we'll check with the supplier before you order.

Ask about fitment

Plan the whole job

  • An alignment after installing new arms or bushings.
  • Matching parts at the other end. Upgrading one side or one link and leaving worn parts elsewhere limits the improvement.
  • Install tools. Pressed-in bushings may need a press or a shop to fit them.

More for your car: Toyota Coilovers & Suspension ยท All Bushings & Mounts

Questions about Toyota C-HR 2018+ Steel-Alloy Powder Coated Hardened Rubber Bushings BoltOn 1-Year Warranty MRS-TY-1770-IV bushings

Will this fit my Toyota C-HR 2018+ Steel-Alloy Powder Coated Hardened Rubber Bushings BoltOn 1-Year Warranty MRS-TY-1770-IV?
It is listed for the Toyota C-HR 2018+ Steel-Alloy Powder Coated Hardened Rubber Bushings BoltOn 1-Year Warranty MRS-TY-1770-IV. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing this?
If the part changes or affects suspension geometry, yes. It is a good idea after any arm, link or bushing change.
Can I install it myself?
Many bolt-on parts can be installed at home with the right tools and a safe way to support the car. Pressed bushings and anything you are unsure about are best left to a shop.
Where do specs and warranty details come from?
From Megan Racing. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.
More parts for this car
Toyota Coilovers & SuspensionBushings & MountsAll Megan Racing Coilovers & Suspension