Before you order: Dodge Challenger SRT Hellcat E32-27-004-02-22 fitment and setup
Lowering springs are the simplest way to drop the Dodge Challenger SRT Hellcat E32-27-004-02-22: shorter, usually stiffer springs that work with your existing dampers.
Fitment notes
- Listed for: 2015-2020 Dodge Challenger SRT Hellcat E32-27-004-02-22.
- Model years: 2015-2020. Check your car's year falls inside this range.
- Factory adaptive dampers: if your car has electronic or adaptive suspension, check whether the listing covers it or needs a cancellation kit.
- Specs, lead time and warranty come from Eibach and can change. The details above this guide are the latest we have.
Read next: Coilovers vs lowering springs: which should you buy?
Not sure it fits? Send us your year, make, model, trim and drivetrain and we'll check with the supplier before you order.
Ask about fitmentPlan the whole job
- An alignment. Any change in ride height changes camber and toe. Set your final height first, then align.
- Camber and toe adjustment. Bigger drops often need adjustable arms or camber plates to align properly. See alignment and camber kits.
- Healthy dampers. Springs work best on dampers in good condition. If yours are old, consider replacing them or going to coilovers.
- Wheel and tire clearance. Check clearance at full lock and full compression, especially with wider wheels. Our ride height and wheel fitment calculator shows how much drop and offset change you are planning.
- The right spring rate. Compare the rates listed here with what our spring rate calculator suggests for your car's weight and use.
More for your car: Dodge Coilovers & Suspension ยท All Lowering Springs
Questions about Dodge Challenger SRT Hellcat E32-27-004-02-22 lowering springs
Will this fit my Dodge Challenger SRT Hellcat E32-27-004-02-22?
It is listed for the 2015-2020 Dodge Challenger SRT Hellcat E32-27-004-02-22. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing lowering springs?
Yes. Changing ride height changes camber and toe. Set your final height, let the suspension settle, then get the car aligned.
How low can I go?
It depends on the adjustment range the brand lists, your wheels and tires, and how you use the car. Most cars that are driven hard work best with a modest drop that leaves enough suspension travel.
Where do specs and warranty details come from?
From Eibach. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.
More parts for this car