• E46 Xi Multi-Pattern Front Hubs and Bearings - Multihub
1 1

SLR Speed

E46 Xi Multi-Pattern Front Hubs and Bearings - Multihub

E46 Xi Multi-Pattern Front Hubs and Bearings - Multihub

$425.16 USD
$425.16 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships directly from the warehouse to you
  • Tracking emailed when it ships
  • Free fitment check before you order

More for your vehicle:BMW E46 Coilovers & Suspension

We designed these hubs allow you to run almost any of the popular 5 bolt wheels you can get your hands on. This makes it much easier to source drift spares, fit awesome looking wheels you never could before, and super easy to swap to different wheels but just spinning your brake rotor.

The patterns on this hub include:
5x112
5x114.3
5x120
5x127 (aka. 5x5)

These are drilled and tapped to M14x1.5. Requires use of M14x1.5 wheel bolts or thread-in wheel studs, sold separately.


Sold as a set (2 lug conversion hubs)

To install you just remove your rotors from your E46 and drill out all 5 holes to 20mm using a step drill (unibit). Then when everything is back on your car, you simply rotate your rotors to the pattern you want to use and bolt your wheels on. Takes just a couple seconds to swap patterns!

You will no longer use the little screw that further bolts the rotor on, this is not needed.

View full details

Before you order: fitment and setup

This SLR Speed part. Below are fitment notes, what usually goes with it, and answers to common questions.

Fitment notes

  • Specs, lead time and warranty come from SLR Speed and can change. The details above this guide are the latest we have.

Not sure it fits? Send us your year, make, model, trim and drivetrain and we'll check with the supplier before you order.

Ask about fitment

Plan the whole job

  • An alignment after any suspension change.
  • Supporting hardware. Old bolts are often seized, so have new hardware on hand.

More for your car: BMW E46 Coilovers & Suspension

Questions

Will this fit my car?
Check the product title and details for the vehicles it is listed for. If you are not sure, contact us with your year, make, model and trim and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing this?
An alignment is a good idea after any suspension change.
Who do I contact with questions?
Contact us with your vehicle details and we will check with the supplier.
Where do specs and warranty details come from?
From SLR Speed. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.
More parts for this car
BMW E46 Coilovers & Suspension