SF Racing Sport Coilovers for 2010-2017 Toyota FJ Cruiser (XJ10)

SF Racing's Sport Coilovers for the 2010-2017 Toyota FJ Cruiser (XJ10) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day.

What you get

Expect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 50mm front and rear. It comes with 18 kg/mm (about 1008 lb/in) springs up front and 12 kg/mm (about 672 lb/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.

Key features

• Monotube damper design for better heat control and fewer leaks
• 32 damping settings on a single knob that sets rebound and compression together
• Cold-wound SAE9254 spring steel
• NOK seals and Italian IP damping oil
• Built-in dust boots and bump stops
• Bolt-on install with no modifications, unless the notes below say otherwise
• Adjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel
• Independent lower mount adjustment keeps spring preload and damper travel where they should be when you change height
• T6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion
• Zinc-plated shock bodies for rust protection

Who it suits

Ideal for street cars that need a sensible drop and some tuning range, without going to track-level stiffness.

Specifications