Before you order: Honda Civic SAE 9254 Cold Wound Steel front drop 25mm rear drop 19mm powder coated MR-LS-HC22 fitment and setup
Lowering springs are the simplest way to drop the Honda Civic SAE 9254 Cold Wound Steel front drop 25mm rear drop 19mm powder coated MR-LS-HC22: shorter, usually stiffer springs that work with your existing dampers.
Fitment notes
- Listed for: 2022+ Honda Civic SAE 9254 Cold Wound Steel front drop 25mm rear drop 19mm powder coated MR-LS-HC22.
- Model years: 2022+. Newer years can change parts mid-generation, so match the exact year.
- Factory adaptive dampers: if your car has electronic or adaptive suspension, check whether the listing covers it or needs a cancellation kit.
- Specs, lead time and warranty come from Megan Racing and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, trim and drivetrain and we'll check with the supplier before you order.
Ask about fitmentPlan the whole job
- An alignment. Any change in ride height changes camber and toe. Set your final height first, then align.
- Camber and toe adjustment. Bigger drops often need adjustable arms or camber plates to align properly. See alignment and camber kits.
- Healthy dampers. Springs work best on dampers in good condition. If yours are old, consider replacing them or going to coilovers.
- Wheel and tire clearance. Check clearance at full lock and full compression, especially with wider wheels. Our ride height and wheel fitment calculator shows how much drop and offset change you are planning.
- The right spring rate. Compare the rates listed here with what our spring rate calculator suggests for your car's weight and use.
More for your car: Honda Civic Coilovers & Suspension · Honda Coilovers & Suspension · All Lowering Springs
Questions about Honda Civic SAE 9254 Cold Wound Steel front drop 25mm rear drop 19mm powder coated MR-LS-HC22 lowering springs
Will this fit my Honda Civic SAE 9254 Cold Wound Steel front drop 25mm rear drop 19mm powder coated MR-LS-HC22?
It is listed for the 2022+ Honda Civic SAE 9254 Cold Wound Steel front drop 25mm rear drop 19mm powder coated MR-LS-HC22. Check your year, model, drivetrain and chassis code against the product title. If anything is different, contact us and we will confirm fitment with the supplier before you order.
Do I need an alignment after installing lowering springs?
Yes. Changing ride height changes camber and toe. Set your final height, let the suspension settle, then get the car aligned.
How low can I go?
It depends on the adjustment range the brand lists, your wheels and tires, and how you use the car. Most cars that are driven hard work best with a modest drop that leaves enough suspension travel.
Where do specs and warranty details come from?
From Megan Racing. We sell parts from several brands and suppliers, and each one sets its own specs, lead times and warranty terms. The product details above are the latest we have.