{"title":"SF Racing Coilovers","description":"\u003cp\u003eSF Racing coilovers and air struts for over 3,000 cars, led by BMW, Mercedes-Benz, Toyota, Audi, Lexus and Honda. We carry four SF Racing lines: Sport coilovers for the street, Track coilovers with firmer valving, N2 coilovers with external reservoirs and separate rebound and compression adjustment, and Air Struts for cars that need to lift for driveways. See \u003ca href=\"\/pages\/sf-racing-coilovers-compared\"\u003eSF Racing Sport vs Track vs N2 compared\u003c\/a\u003e for spring rates, damper sizes and prices.\u003c\/p\u003e\u003cp\u003eNot sure which kit fits? Every product title lists the years, model and chassis code. \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e with your car and we will check fitment with the supplier before you order.\u003c\/p\u003e","products":[{"product_id":"sf-racing-n2-coilovers-for-2007-2013-bmw-m3-coupe-e92","title":"SF Racing N2 Coilovers for 2007-2013 BMW M3 Coupe (E92)","description":"\u003cp\u003eFor a serious build on the 2007-2013 BMW M3 Coupe (E92), the SF Racing N2 kit combines external-reservoir dampers, 2-way adjustment and full ride height adjustment. This version is listed for RWD models.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 50mm rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 18 kg\/mm (about 1008 lb\/in) at the rear. Rebound and compression are adjusted separately (2-way), so you can tune how the car settles over bumps independently from how it reacts to them. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to dedicated track, time attack and serious street builds where finer damping control is worth the extra cost.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-BM08-05-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2007-2013 BMW M3 Coupe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eE92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN2 External Reservoir Coilovers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 18 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609109293,"sku":"SF-BM08-05-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-2007-2013-bmw-m3-coupe-e92-sf-bm08-05-n2-1250978550.jpg?v=1792147536"},{"product_id":"sf-racing-sport-coilovers-for-1997-2001-acura-integra-type-r-dc2","title":"SF Racing Sport Coilovers for 1997-2001 Acura Integra Type R (DC2)","description":"\u003cp\u003eBuilt for daily-driven cars, this SF Racing Sport kit replaces the factory struts and springs on the 1997-2001 Acura Integra Type-R (DC2) with height-adjustable coilovers and single-knob damping adjustment. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003e1997-2001 Acura Integra Type-R setup details\u003c\/h3\u003e\u003cp\u003eIt is a true coilover at all four corners, so the spring and damper work as one unit front and rear. Damper bodies are 50mm front and rear. Spring rates: Front: 10 kg\/mm \/ Rear: 6 kg\/mm. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum (rubber bushings), with aluminum (pillowball bushings) available as an option. At the rear, the mounts are aluminum (rubber bushings) (optional: aluminum (pillowball bushings)).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Rear eye lower mount Rear fork lower mount.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-AC01-02R-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1997-2001 Acura Integra Type-R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFront: 10 kg\/mm \/ Rear: 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum (Rubber Bushings) \/ Optional: Aluminum (Pillowball Bushings)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum (Rubber Bushings) \/ Optional: Aluminum (Pillowball Bushings)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRear eye lower mount Rear fork lower mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609273133,"sku":"SF-AC01-02R-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-1994-2001-acura-integra-dc2-sf-ac01-02-sp-1194282740.jpg?v=1792147537"},{"product_id":"sf-racing-n2-coilovers-for-2011-2018-bmw-6-series-coupe-rwd-f13","title":"SF Racing N2 Coilovers for 2011-2018 BMW 6 Series Coupe RWD (F13)","description":"\u003cp\u003eSF Racing's N2 Coilovers for the 2011-2018 BMW 6 Series Coupe (F13) add external reservoirs and 2-way damping adjustment for drivers who want finer control over how the car rides and handles. This version is listed for RWD models.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2011-2018 BMW 6 Series Coupe\u003c\/h3\u003e\u003cp\u003eFront and rear are both true coilovers, which keeps ride height adjustment simple and precise at each corner. Damper bodies are 52mm front and 50mm rear. It comes with 12 kg\/mm (about 672 lb\/in) springs up front and 8.3 kg\/mm (about 465 lb\/in) at the rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings. At the rear, the mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for experienced drivers who want to tune rebound and compression separately.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-BM04-04-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2011-2018 BMW 6 Series Coupe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eF13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm \/ 8.3 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Front: 12K \/ Rear: 8.3K","offer_id":67654609207597,"sku":"SF-BM04-04-N2","price":1795.0,"currency_code":"USD","in_stock":true},{"title":"Front: 14K \/ Rear: 8.3K","offer_id":67654609240365,"sku":"SF-BM04-04-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-2011-2018-bmw-6-series-coupe-rwd-f13-1250978551.jpg?v=1792147537"},{"product_id":"sf-racing-n2-coilovers-true-rear-for-2014-honda-fit-gk","title":"SF Racing N2 Coilovers (True Rear) for 2014+ Honda Fit (GK)","description":"\u003cp\u003eThe N2 is the top of SF Racing's coilover range: external-reservoir dampers with separate rebound and compression adjustment, here built for the 2014+ Honda Fit (GK3\/GK4\/GK5\/GK6). This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003e2014+ Honda Fit setup details\u003c\/h3\u003e\u003cp\u003eBoth ends use a true coilover layout, with the spring sitting on the damper body at every corner. Damper bodies are 52mm front and 50mm rear. It comes with 6 kg\/mm (about 336 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Rebound and compression are adjusted separately (2-way), so you can tune how the car settles over bumps independently from how it reacts to them.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for high-performance builds that have outgrown 1-way adjustable coilovers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO04-04-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2014+ Honda Fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGK3\/GK4\/GK5\/GK6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN2 External Reservoir Coilovers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609174829,"sku":"SF-HO04-04-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-2015-2020-honda-fit-gk-1194305667.jpg?v=1792147537"},{"product_id":"sf-racing-n2-coilovers-for-2008-2017-ford-fiesta-ja8-jr8","title":"SF Racing N2 Coilovers for 2008-2017 Ford Fiesta (JA8\/JR8)","description":"\u003cp\u003eThe N2 is the top of SF Racing's coilover range: external-reservoir dampers with separate rebound and compression adjustment, here built for the 2008-2017 Ford Fiesta (JA8\/JR8). This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 5 kg\/mm (about 280 lb\/in) springs up front and 3 kg\/mm (about 168 lb\/in) at the rear. Rebound and compression are adjusted separately (2-way), so you can tune how the car settles over bumps independently from how it reacts to them. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for high-performance builds that have outgrown 1-way adjustable coilovers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-FO01-01-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2008-2017 Ford Fiesta\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJA8\/JR8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN2 External Reservoir Coilovers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 kg\/mm \/ 3 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609338669,"sku":"SF-FO01-01-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-2008-2017-ford-fiesta-ja8-jr8-sf-fo01-01-n2-1250978430.jpg?v=1792147537"},{"product_id":"sf-racing-n2-coilovers-for-1992-2000-honda-domani-mb6-mc2","title":"SF Racing N2 Coilovers for 1992-2000 Honda Domani (MB6\/MC2)","description":"\u003cp\u003eFor a serious build on the 1992-2000 Honda Domani (MB6\/MC2), the SF Racing N2 kit combines external-reservoir dampers, 2-way adjustment and full ride height adjustment.\u003c\/p\u003e\n\u003ch3\u003e1992-2000 Honda Domani setup details\u003c\/h3\u003e\u003cp\u003eBoth ends use a true coilover layout, with the spring sitting on the damper body at every corner. Damper bodies are 50mm front and rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Rebound and compression are adjusted separately (2-way), so you can tune how the car settles over bumps independently from how it reacts to them. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option. At the rear, the mounts are aluminum with rubber bushings (optional: aluminum camber plates with pillowball bushings).\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for high-performance builds that have outgrown 1-way adjustable coilovers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO28-01-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1992-2000 Honda Domani\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMB6\/MC2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal Reservoir N2 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609305901,"sku":"SF-HO28-01-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-1996-2003-bmw-5-series-touring-e39-1194306513_a8b3bba1-d139-4610-a41b-d5430e02ecb1.jpg?v=1792147537"},{"product_id":"sf-racing-n2-coilovers-for-2003-2007-honda-accord-mk7-eu-jdm-cl7-cl8-cl9","title":"SF Racing N2 Coilovers for 2003-2007 Honda Accord MK7 EU\/JDM (CL7\/CL8\/CL9)","description":"\u003cp\u003eThe N2 is the top of SF Racing's coilover range: external-reservoir dampers with separate rebound and compression adjustment, here built for the 2003-2007 Honda Accord MK7 EU\/JDM (CL7\/CL8\/CL9).\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eFront and rear are both true coilovers, which keeps ride height adjustment simple and precise at each corner. Damper bodies are 50mm front and rear. It comes with 14.5 kg\/mm (about 812 lb\/in) springs up front and 7.2 kg\/mm (about 403 lb\/in) at the rear. Rebound and compression are adjusted separately (2-way), so you can tune how the car settles over bumps independently from how it reacts to them. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option. At the rear, the mounts are aluminum with rubber bushing.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to dedicated track, time attack and serious street builds where finer damping control is worth the extra cost.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO01-06-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2003-2007 Honda Accord MK7 EU\/JDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCL7\/CL8\/CL9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal Reservoir N2 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14.5 kg\/mm \/ 7.2 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609535277,"sku":"SF-HO01-06-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-1996-2003-bmw-5-series-touring-e39-1194306513_038588a1-e18d-455e-a3ba-9893b715911e.jpg?v=1792147537"},{"product_id":"sf-racing-n2-coilovers-for-2014-subaru-levorg-vm4-vmg","title":"SF Racing N2 Coilovers for 2014+ Subaru Levorg (VM4\/VMG)","description":"\u003cp\u003eThe N2 is the top of SF Racing's coilover range: external-reservoir dampers with separate rebound and compression adjustment, here built for the 2014+ Subaru Levorg (VM4\/VMG).\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2014+ Subaru Levorg\u003c\/h3\u003e\u003cp\u003eIt is a true coilover at all four corners, so the spring and damper work as one unit front and rear. Damper bodies are 52mm front and 50mm rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 7 kg\/mm (about 392 lb\/in) at the rear. Rebound and compression are adjusted separately (2-way), so you can tune how the car settles over bumps independently from how it reacts to them. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option. At the rear, the mounts are aluminum with rubber bushing.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for experienced drivers who want to tune rebound and compression separately.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-SU07-01-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2014+ Subaru Levorg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVM4\/VMG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal Reservoir N2 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609142061,"sku":"SF-SU07-01-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-1996-2003-bmw-5-series-touring-e39-1194306513.jpg?v=1792147536"},{"product_id":"sf-racing-n2-coilovers-for-2019-kia-mohave-hm2","title":"SF Racing N2 Coilovers for 2019+ Kia Mohave (HM2)","description":"\u003cp\u003eFor a serious build on the 2019+ Kia Mohave (HM2), the SF Racing N2 kit combines external-reservoir dampers, 2-way adjustment and full ride height adjustment.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 50mm rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 8 kg\/mm (about 448 lb\/in) at the rear. Rebound and compression are adjusted separately (2-way), so you can tune how the car settles over bumps independently from how it reacts to them. The front top mounts are aluminum with rubber bushing. At the rear, the mounts are -.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for high-performance builds that have outgrown 1-way adjustable coilovers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-KI15-02-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Kia Mohave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal Reservoir N2 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609371437,"sku":"SF-KI15-02-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-1996-2003-bmw-5-series-touring-e39-1194306513_434e1d21-e455-45ad-8097-68bb779f5c28.jpg?v=1792147537"},{"product_id":"sf-racing-n2-coilovers-for-2008-2013-peugeot-308-t7","title":"SF Racing N2 Coilovers for 2008-2013 Peugeot 308 (T7)","description":"\u003cp\u003eSF Racing's N2 Coilovers for the 2008-2013 Peugeot 308 (T7) add external reservoirs and 2-way damping adjustment for drivers who want finer control over how the car rides and handles.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 6 kg\/mm (about 336 lb\/in) springs up front and 5 kg\/mm (about 280 lb\/in) at the rear. Rebound and compression are adjusted separately (2-way), so you can tune how the car settles over bumps independently from how it reacts to them. The front top mounts are -. At the rear, the mounts are -.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for experienced drivers who want to tune rebound and compression separately.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-PE03-06-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2008-2013 Peugeot 308\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal Reservoir N2 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6 kg\/mm \/ 5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609404205,"sku":"SF-PE03-06-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-1996-2003-bmw-5-series-touring-e39-1194306513_3c36d9fe-2912-4063-bbec-5c41594f0ff9.jpg?v=1792147537"},{"product_id":"sf-racing-sport-coilovers-for-2004-2009-ford-focus-mk2-c307-europe","title":"SF Racing Sport Coilovers for 2004-2009 Ford Focus MK2 (C307\/Europe)","description":"\u003cp\u003eSF Racing Sport Coilovers for 2004-2009 Ford Focus MK2 (C307\/Europe), listed for the 2004-2009 Ford Focus MK2. Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-FO03-04-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 2004-2009 Ford Focus MK2\u003c\/li\u003e\n\u003cli\u003eChassis: C307\/Europe\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 7\/9\/10 kg\/mm Rear: 5 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: Rubber Rear: Rubber\u003c\/li\u003e\n\u003cli\u003eCamber Plates: Front: Camber Rear: Important Notes: Front Spring Rate: 7 kg\/mm = Softer | 9 kg\/mm = Gasoline engine | 10 kg\/mm = Diesel engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner of the car has 32 levels (or clicks) of damping adjustability.\u003c\/li\u003e\n\u003cli\u003eThe coilovers also use rubber top mounts to help reduce the noise that typically comes with high performance aftermarket coilovers.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003cli\u003eNotes: Fits EU\/JDM-market models only. This vehicle was not sold in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609469741,"sku":"SF-FO03-04-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2004-2009-ford-focus-mk2-c307europe-sf-fo03-04-tr-526753.jpg?v=1792147536"},{"product_id":"sf-racing-sport-coilovers-for-2009-2016-renault-megane-rs","title":"SF Racing Sport Coilovers for 2009-2016 Renault Megane RS","description":"\u003cp\u003eIf you want a lower, tighter 2009-2016 Renault Megane RS without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings.\u003c\/p\u003e\n\u003ch3\u003e2009-2016 Renault Megane RS setup details\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 52mm front and 46mm rear. It comes with 8 kg\/mm (about 448 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-RE12-02-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2009-2016 Renault Megane RS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609436973,"sku":"SF-RE12-02-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2010-2015-renault-latitude-l70-sf-re10-01-sp-29168368091220.jpg?v=1792147537"},{"product_id":"sf-racing-sport-coilovers-for-2009-2015-ferrari-458-italia-f142","title":"SF Racing Sport Coilovers for 2009-2015 Ferrari 458 Italia (F142)","description":"\u003cp\u003eBuilt for daily-driven cars, this SF Racing Sport kit replaces the factory struts and springs on the 2009-2015 Ferrari 458 Italia (F142) with height-adjustable coilovers and single-knob damping adjustment. This version is listed for RWD models.\u003c\/p\u003e\n\u003ch3\u003e2009-2015 Ferrari 458 Italia setup details\u003c\/h3\u003e\u003cp\u003eFront and rear are both true coilovers, which keeps ride height adjustment simple and precise at each corner. Damper bodies are 50mm front and rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 16 kg\/mm (about 896 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings. At the rear, the mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-FE05-02-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2009-2015 Ferrari 458 Italia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eF142\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 16 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609502509,"sku":"SF-FE05-02-SP","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2009-2015-ferrari-458-italia-f142-sf-fe05-02-tr-190651.jpg?v=1792147537"},{"product_id":"sf-racing-sport-coilovers-for-1994-1999-daihatsu-hijet-s100-s110","title":"SF Racing Sport Coilovers for 1994-1999 Daihatsu Hijet (S100\/S110)","description":"\u003cp\u003eIf you want a lower, tighter 1994-1999 Daihatsu Hijet (S100\/S110) without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings.\u003c\/p\u003e\n\u003ch3\u003e1994-1999 Daihatsu Hijet setup details\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 4 kg\/mm (about 224 lb\/in) springs up front and Not Applicable at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Rear Spring Not Included.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-DA03-01-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1994-1999 Daihatsu Hijet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eS100\/S110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 kg\/mm \/ Not Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRear Spring Not Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609600813,"sku":"SF-DA03-01-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-1992-1999-bmw-3-series-rwd-e36-sf-bm02-02-sp-364923_466d8b64-2858-4ef2-adc6-038193294cbb.webp?v=1792147537"},{"product_id":"sf-racing-n2-coilovers-for-2000-2006-opel-corsa-c","title":"SF Racing N2 Coilovers for 2000-2006 Opel Corsa C","description":"\u003cp\u003eFor a serious build on the 2000-2006 Opel Corsa C, the SF Racing N2 kit combines external-reservoir dampers, 2-way adjustment and full ride height adjustment.\u003c\/p\u003e\n\u003ch3\u003e2000-2006 Opel Corsa C setup details\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 52mm front and 46mm rear. It comes with 5 kg\/mm (about 280 lb\/in) springs up front and 4 kg\/mm (about 224 lb\/in) at the rear. Rebound and compression are adjusted separately (2-way), so you can tune how the car settles over bumps independently from how it reacts to them. The front top mounts are -. At the rear, the mounts are -.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for experienced drivers who want to tune rebound and compression separately.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-OP01-02-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2000-2006 Opel Corsa C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal Reservoir N2 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 kg\/mm \/ 4 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609568045,"sku":"SF-OP01-02-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-1996-2003-bmw-5-series-touring-e39-1194306513_461f661b-e2ff-495f-b6a4-35a9e782ac33.jpg?v=1792147537"},{"product_id":"sf-racing-replacement-damper-for-track-coilovers","title":"SF Racing Replacement Damper for Track Coilovers","description":"\u003cp\u003eSF Racing Replacement Damper for Track Coilovers, listed for the Track Coilovers. A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne replacement strut for SF Racing Track Coilovers. Please provide your original order number with us to place your order. Struts are sold individually.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609633581,"sku":"SF-STRUT-TR","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-replacement-damper-sf-rep-strut-527766_87bb6969-5eee-4678-ab82-ab85709d3511.jpg?v=1792147537"},{"product_id":"sf-racing-n2-coilovers-for-2004-2009-opel-astra-h","title":"SF Racing N2 Coilovers for 2004-2009 Opel Astra H","description":"\u003cp\u003eThe N2 is the top of SF Racing's coilover range: external-reservoir dampers with separate rebound and compression adjustment, here built for the 2004-2009 Opel Astra H.\u003c\/p\u003e\n\u003ch3\u003e2004-2009 Opel Astra H setup details\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 7 kg\/mm (about 392 lb\/in) springs up front and 5 kg\/mm (about 280 lb\/in) at the rear. Rebound and compression are adjusted separately (2-way), so you can tune how the car settles over bumps independently from how it reacts to them. The front top mounts are -. At the rear, the mounts are -.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for experienced drivers who want to tune rebound and compression separately.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-OP04-03-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2004-2009 Opel Astra H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal Reservoir N2 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7 kg\/mm \/ 5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609666349,"sku":"SF-OP04-03-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-1996-2003-bmw-5-series-touring-e39-1194306513_81827bc0-0d3b-435f-af52-ac859a3b91a0.jpg?v=1792147537"},{"product_id":"sf-racing-n2-coilovers-for-1998-2015-peugeot-206","title":"SF Racing N2 Coilovers for 1998-2015 Peugeot 206","description":"\u003cp\u003eThe N2 is the top of SF Racing's coilover range: external-reservoir dampers with separate rebound and compression adjustment, here built for the 1998-2015 Peugeot 206.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 7 kg\/mm (about 392 lb\/in) springs up front and - at the rear. Rebound and compression are adjusted separately (2-way), so you can tune how the car settles over bumps independently from how it reacts to them. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option. At the rear, the mounts are -.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for experienced drivers who want to tune rebound and compression separately.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-PE02-01-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1998-2015 Peugeot 206\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExternal Reservoir N2 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7 kg\/mm \/ -\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609699117,"sku":"SF-PE02-01-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-1996-2003-bmw-5-series-touring-e39-1194306513_e35b0d59-54f7-4e5f-952f-98fb9aeb14ed.jpg?v=1792147537"},{"product_id":"sf-racing-sport-coilovers-for-2004-2015-daihatsu-boon-ac10","title":"SF Racing Sport Coilovers for 2004-2015 Daihatsu Boon (AC10)","description":"\u003cp\u003eIf you want a lower, tighter 2004-2015 Daihatsu Boon (AC10) without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2004-2015 Daihatsu Boon\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 5 kg\/mm (about 280 lb\/in) springs up front and 3 kg\/mm (about 168 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for street cars that need a sensible drop and some tuning range, without going to track-level stiffness.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-DA01-01-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2004-2015 Daihatsu Boon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAC10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 kg\/mm \/ 3 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609731885,"sku":"SF-DA01-01-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2022-honda-civic-fefl-sf-ho02-23-sp-339171_135a14ee-bf54-49b5-9ced-8c95f18124fc.webp?v=1792147537"},{"product_id":"sf-racing-sport-coilovers-for-2004-2015-daihatsu-sirion-m300","title":"SF Racing Sport Coilovers for 2004-2015 Daihatsu Sirion (M300)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 2004-2015 Daihatsu Sirion (M300) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2004-2015 Daihatsu Sirion\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 5 kg\/mm (about 280 lb\/in) springs up front and 3 kg\/mm (about 168 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-DA01-01-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2004-2015 Daihatsu Sirion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 kg\/mm \/ 3 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609764653,"sku":"SF-DA01-01-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2022-honda-civic-fefl-sf-ho02-23-sp-339171_5c766ff7-8cd9-486c-92e7-446c471043ff.webp?v=1792147539"},{"product_id":"sf-racing-sport-coilovers-for-1999-2006-seat-leon-mk1-fwd-1m","title":"SF Racing Sport Coilovers for 1999-2006 Seat Leon MK1 FWD (1M)","description":"\u003cp\u003eSF Racing Sport Coilovers for 1999-2006 Seat Leon MK1 FWD (1M), listed for the 1999-2006 Seat Leon MK1 FWD. A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-SE01-01-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 1999-2006 Seat Leon MK1 FWD\u003c\/li\u003e\n\u003cli\u003eChassis: 1M\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 7 kg\/mm Rear: 4 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: OEM Rear: OEM\u003c\/li\u003e\n\u003cli\u003eCamber Plates: Front: - Rear: Notes:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner of the car has 32 levels (or clicks) of damping adjustability.\u003c\/li\u003e\n\u003cli\u003eThe coilovers also use rubber top mounts to help reduce the noise that typically comes with high performance aftermarket coilovers.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609830189,"sku":"SF-SE01-01-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-1999-2006-seat-leon-mk1-2wd-1m-sf-se01-01-tr-208325.jpg?v=1792147540"},{"product_id":"sf-racing-sport-coilovers-for-2011-2018-bentley-continental-gt-3w8","title":"SF Racing Sport Coilovers for 2011-2018 Bentley Continental GT (3W8)","description":"\u003cp\u003eBuilt for daily-driven cars, this SF Racing Sport kit replaces the factory struts and springs on the 2011-2018 Bentley Continental GT (3W8) with height-adjustable coilovers and single-knob damping adjustment. This version is listed for AWD models.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2011-2018 Bentley Continental GT (3W8)\u003c\/h3\u003e\u003cp\u003eFront and rear are both true coilovers, which keeps ride height adjustment simple and precise at each corner. Damper bodies are 50mm front and rear. It comes with 16 kg\/mm (about 896 lb\/in) springs up front and 10 kg\/mm (about 560 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushing. At the rear, the mounts are aluminum with rubber bushing.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-BL03-02-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2011-2018 Bentley Continental GT (3W8)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3W8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16 kg\/mm \/ 10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609862957,"sku":"SF-BL03-02-SP","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2003-2011-bentley-continental-gt-3w-sf-bl03-01-sp-476589.jpg?v=1792147541"},{"product_id":"sf-racing-sport-coilovers-for-2005-2009-peugeot-1007","title":"SF Racing Sport Coilovers for 2005-2009 Peugeot 1007","description":"\u003cp\u003eLooking for coilovers for your Peugeot 1007? This SF Racing listing covers the SF Racing Sport Coilovers for 2005-2009 Peugeot 1007. Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-PE11-02-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 2005-2009 Peugeot 1007\u003c\/li\u003e\n\u003cli\u003eChassis: Damper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 7 kg\/mm Rear: 3 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: OEM Rear: Camber Plates: Front: Camber Rear:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner features 32 levels of damping adjustability, allowing precise tuning of rebound and compression with a single adjustment knob.\u003c\/li\u003e\n\u003cli\u003eOur coilovers include hardened rubber top mounts to minimize noise and enhance durability, and some have optional pillowball bushings available to increase steering response even more.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609895725,"sku":"SF-PE11-02-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2005-2009-peugeot-1007-sf-pe11-02-tr-01-403749.jpg?v=1792147541"},{"product_id":"sf-racing-sport-coilovers-for-2001-2007-nissan-skyline-v35","title":"SF Racing Sport Coilovers for 2001-2007 Nissan Skyline (V35)","description":"\u003cp\u003eIf you want a lower, tighter 2001-2007 Nissan Skyline (V35) without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2001-2007 Nissan Skyline\u003c\/h3\u003e\u003cp\u003eSpring rates: Front: 12 kg\/mm \/ Rear: 8 kg\/mm. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are rubber, with pillowball available as an option. At the rear, the mounts are rubber (optional: pillowball).\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-NI09-06-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2001-2007 Nissan Skyline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eV35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFront: 12 kg\/mm \/ Rear: 8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Rubber \/ Optional: Pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Rubber \/ Optional: Pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609928493,"sku":"SF-NI09-06-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2001-2007-nissan-skyline-v35-sf-ni09-06-tr-839184.jpg?v=1792147541"},{"product_id":"sf-racing-n2-coilovers-for-2013-peugeot-208-5-door-a9","title":"SF Racing N2 Coilovers for 2013+ Peugeot 208 5-Door (A9)","description":"\u003cp\u003eLooking for coilovers for your Peugeot 208 5-Door? This SF Racing listing covers the SF Racing N2 Coilovers for 2013+ Peugeot 208 5-Door (A9). A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-PE02-05-N2\u003c\/li\u003e\n\u003cli\u003eVehicle: 2013+ Peugeot 208 5-Door\u003c\/li\u003e\n\u003cli\u003eChassis: A9\u003c\/li\u003e\n\u003cli\u003eDamper Model: N2 External Reservoir Coilovers\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 2-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 8 kg\/mm Rear: 4 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: OEM Rear: Camber Plates: Front: - Rear: Notes:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner features 32 levels of damping adjustability, allowing precise tuning of rebound and compression with a single adjustment knob.\u003c\/li\u003e\n\u003cli\u003eOur coilovers include hardened rubber top mounts to minimize noise and enhance durability, and some have optional pillowball bushings available to increase steering response even more.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609961261,"sku":"SF-PE02-05-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2013-peugeot-208-5-door-a9-sf-pe02-05-tr-02-142874.jpg?v=1792147542"},{"product_id":"sf-racing-sport-coilovers-for-2010-2013-mercedes-benz-vito","title":"SF Racing Sport Coilovers for 2010-2013 Mercedes-Benz Vito","description":"\u003cp\u003eSF Racing Sport Coilovers for 2010-2013 Mercedes-Benz Vito, listed for the 2010-2013 Mercedes-Benz Vito. Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003eChassis: 636705\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 14K Rear: 8K\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: Rubber Rear: OEM\u003c\/li\u003e\n\u003cli\u003eCamber Plates: Front: Pillowball Rear: Not applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner features 32 levels of damping adjustability, allowing precise tuning of rebound and compression with a single adjustment knob.\u003c\/li\u003e\n\u003cli\u003eOur coilovers include hardened rubber top mounts to minimize noise and enhance durability, and some have optional pillowball bushings available to increase steering response even more.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654609994029,"sku":"SF-MB17-02-SP","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2010-2013-mercedes-benz-vito-sf-mb17-02-tr-02-643532.jpg?v=1792147542"},{"product_id":"sf-racing-sport-coilovers-for-1991-1999-seat-toledo-mk1-1l","title":"SF Racing Sport Coilovers for 1991-1999 Seat Toledo MK1 (1L)","description":"\u003cp\u003eThis SF Racing coilover kit is listed for the 1991-1999 Seat Toledo MK1 (1L). A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-SE02-01-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 1991-1999 Seat Toledo MK1\u003c\/li\u003e\n\u003cli\u003eChassis: 1L\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 6 kg\/mm Rear: 5 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: OEM Rear: OEM\u003c\/li\u003e\n\u003cli\u003eCamber Plates: Front: - Rear: Notes:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner of the car has 32 levels (or clicks) of damping adjustability.\u003c\/li\u003e\n\u003cli\u003eThe coilovers also use rubber top mounts to help reduce the noise that typically comes with high performance aftermarket coilovers.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610026797,"sku":"SF-SE02-01-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-1991-1999-seat-toledo-mk1-1l-sf-se02-01-tr-547589.jpg?v=1792147542"},{"product_id":"sf-racing-sport-coilovers-for-2017-2024-audi-a5-fwd-b9-8w6-clearance","title":"SF Racing Sport Coilovers for 2017-2024 Audi A5 FWD (B9\/8W6) CLEARANCE","description":"\u003cp\u003eIf you want a lower, tighter 2017-2024 Audi A5 (B9\/8W6) without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 12 kg\/mm (about 672 lb\/in) springs up front and 8 kg\/mm (about 448 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for street cars that need a sensible drop and some tuning range, without going to track-level stiffness.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-AU04-05-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2017-2024 Audi A5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eB9\/8W6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm \/ 8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610059565,"sku":"SF-AU04-05-SP-48","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2017-audi-a5-fwd-b98w6-sf-au04-05-sp-427713.jpg?v=1792147542"},{"product_id":"sf-racing-sport-coilovers-for-2017-peugeot-4008","title":"SF Racing Sport Coilovers for 2017+ Peugeot 4008","description":"\u003cp\u003eThis SF Racing coilover kit is listed for the 2017+ Peugeot 4008. A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-PE07-03-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 2017+ Peugeot 4008\u003c\/li\u003e\n\u003cli\u003eChassis: Damper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 6 kg\/mm Rear: 4 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: Rubber Rear: Camber Plates: Front: - Rear:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner features 32 levels of damping adjustability, allowing precise tuning of rebound and compression with a single adjustment knob.\u003c\/li\u003e\n\u003cli\u003eOur coilovers include hardened rubber top mounts to minimize noise and enhance durability, and some have optional pillowball bushings available to increase steering response even more.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610092333,"sku":"SF-PE07-03-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2017-peugeot-4008-sf-pe07-03-tr-01-169378.jpg?v=1792147543"},{"product_id":"sf-racing-sport-coilovers-for-2011-2018-ford-focus-mk3-c346","title":"SF Racing Sport Coilovers for 2011-2018 Ford Focus MK3 (C346)","description":"\u003cp\u003eThis SF Racing coilover kit is listed for the 2011-2018 Ford Focus MK3 (C346). A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-FO03-05-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 2011-2018 Ford Focus MK3\u003c\/li\u003e\n\u003cli\u003eChassis: C346\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 8 kg\/mm Rear: 5 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: Rubber Rear: Rubber\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner of the car has 32 levels (or clicks) of damping adjustability.\u003c\/li\u003e\n\u003cli\u003eThe coilovers also use rubber top mounts to help reduce the noise that typically comes with high performance aftermarket coilovers.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003cli\u003eCamber Plates: Front: Camber Rear: Important Notes: Notes: Fits EU\/JDM-market models only. This vehicle was not sold in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610125101,"sku":"SF-FO03-05-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2011-2018-ford-focus-mk3-c346-sf-fo03-05-tr-520553.jpg?v=1792147543"},{"product_id":"sf-racing-sport-coilovers-for-2002-2008-infiniti-g35-coupe-v35","title":"SF Racing Sport Coilovers for 2002-2008 Infiniti G35 Coupe (V35)","description":"\u003cp\u003eThis SF Racing coilover kit is listed for the 2002-2008 Infiniti G35 Coupe (V35). A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003eChassis: V35\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 12 kg\/mm Rear: 8 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: Rubber Rear: Rubber\u003c\/li\u003e\n\u003cli\u003eCamber Plates: Front: Pillowball Rear: Pillowball\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner features 32 levels of damping adjustability, allowing precise tuning of rebound and compression with a single adjustment knob.\u003c\/li\u003e\n\u003cli\u003eOur coilovers include hardened rubber top mounts to minimize noise and enhance durability, and some have optional pillowball bushings available to increase steering response even more.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610157869,"sku":"SF-IF02-10-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2009-2013-infiniti-g37-coupe-v36-sf-if02-10-tr-01-380375.jpg?v=1792147545"},{"product_id":"sf-racing-sport-coilovers-for-1999-2005-seat-toledo-mk2-1m","title":"SF Racing Sport Coilovers for 1999-2005 Seat Toledo MK2 (1M)","description":"\u003cp\u003eLooking for coilovers for your Seat Toledo MK2? This SF Racing listing covers the SF Racing Sport Coilovers for 1999-2005 Seat Toledo MK2 (1M). A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-SE02-02-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 1999-2005 Seat Toledo MK2\u003c\/li\u003e\n\u003cli\u003eChassis: 1M\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 7 kg\/mm Rear: 5 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: OEM Rear: OEM\u003c\/li\u003e\n\u003cli\u003eCamber Plates: Front: - Rear: Notes:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner of the car has 32 levels (or clicks) of damping adjustability.\u003c\/li\u003e\n\u003cli\u003eThe coilovers also use rubber top mounts to help reduce the noise that typically comes with high performance aftermarket coilovers.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610190637,"sku":"SF-SE02-02-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-1999-2005-seat-toledo-mk2-1m-sf-se02-02-tr-138812.jpg?v=1792147545"},{"product_id":"sf-racing-sport-coilovers-for-2007-2013-bmw-m3-coupe-e92","title":"SF Racing Sport Coilovers for 2007-2013 BMW M3 Coupe (E92)","description":"\u003cp\u003eIf you want a lower, tighter 2007-2013 BMW M3 Coupe (E92) without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings. This version is listed for RWD models.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 52mm front and 50mm rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 18 kg\/mm (about 1008 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-BM08-05-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2007-2013 BMW M3 Coupe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eE92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 18 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610223405,"sku":"SF-BM08-05-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2007-2013-bmw-m3-coupe-e92-sf-bm08-05-tr-407653.jpg?v=1792147545"},{"product_id":"sf-racing-sport-coilovers-for-2015-2019-toyota-yaris-ia-dj-us","title":"SF Racing Sport Coilovers for 2015-2019 Toyota Yaris iA (DJ\/US)","description":"\u003cp\u003eSF Racing Sport Coilovers for 2015-2019 Toyota Yaris iA (DJ\/US), listed for the 2015-2019 Toyota Yaris iA. A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-TO10-05-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 2015-2019 Toyota Yaris iA\u003c\/li\u003e\n\u003cli\u003eChassis: DJ\/US\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 5 kg\/mm Rear: 4.5 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: Rubber Rear: Rubber\u003c\/li\u003e\n\u003cli\u003eCamber Plates: Front: Camber Rear: Notes:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner features 32 levels of damping adjustability, allowing precise tuning of rebound and compression with a single adjustment knob.\u003c\/li\u003e\n\u003cli\u003eOur coilovers include hardened rubber top mounts to minimize noise and enhance durability, and some have optional pillowball bushings available to increase steering response even more.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610256173,"sku":"SF-TO10-05-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2015-2019-toyota-yaris-ia-djus-sf-to10-05-tr-01-720033.jpg?v=1792147545"},{"product_id":"sf-racing-air-struts-for-2010-2016-buick-lacrosse","title":"SF Racing Air Struts for 2010-2016 Buick LaCrosse","description":"\u003cp\u003eThese SF Racing Air Struts for the 2010-2016 Buick LaCrosse give adjustable, on-demand ride height. They are the air suspension half of an air ride setup; you also need management to run them.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eDamper bodies are 52mm front and 46mm rear. Damping is 1-way, with one adjuster that changes rebound and compression together.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if you want adjustable ride height on demand rather than a fixed drop.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-BU03-02-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2010-2016 Buick LaCrosse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Strut Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610288941,"sku":"SF-BU03-02-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/Air_suspension_8.jpg?v=1792147546"},{"product_id":"sf-racing-sport-coilovers-for-2019-kia-forte-ex-premium","title":"SF Racing Sport Coilovers for 2019+ Kia Forte (EX Premium)","description":"\u003cp\u003eLooking for coilovers for your Kia Forte? This SF Racing listing covers the SF Racing Sport Coilovers for 2019+ Kia Forte (EX Premium). Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003eChassis: EX Premium\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 7K Rear: 5K\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: Rubber Rear: Not applicable\u003c\/li\u003e\n\u003cli\u003eCamber Plates: Front: Camber Rear: Not applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner features 32 levels of damping adjustability, allowing precise tuning of rebound and compression with a single adjustment knob.\u003c\/li\u003e\n\u003cli\u003eOur coilovers include hardened rubber top mounts to minimize noise and enhance durability, and some have optional pillowball bushings available to increase steering response even more.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610321709,"sku":"SF-KI08-04-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2019-kia-forte-ex-premium-sf-ki08-04-tr-02-177738.jpg?v=1792147546"},{"product_id":"sf-racing-sport-coilovers-for-1992-1995-honda-civic-rear-fork-eg","title":"SF Racing Sport Coilovers for 1992-1995 Honda Civic Rear Fork (EG)","description":"\u003cp\u003eSF Racing Sport Coilovers for 1992-1995 Honda Civic Rear Fork (EG), listed for the 1992-1995 Honda Civic Rear Fork. Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-HO02-03-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 1992-1995 Honda Civic Rear Fork\u003c\/li\u003e\n\u003cli\u003eChassis: EG\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 50mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 10 kg\/mm Rear: 6 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: Rubber Rear: Rubber\u003c\/li\u003e\n\u003cli\u003eCamber Plates: Front: Pillowball Rear: Pillowball\u003c\/li\u003e\n\u003cli\u003eNotes: Rear shock- fork lower mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner of the car has 32 levels (or clicks) of damping adjustability.\u003c\/li\u003e\n\u003cli\u003eThe coilovers also use rubber top mounts to help reduce the noise that typically comes with high performance aftermarket coilovers.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610354477,"sku":"SF-HO02-03-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-1992-1995-honda-civic-rear-fork-eg-sf-ho02-03-tr-237519.jpg?v=1792147546"},{"product_id":"sf-racing-sport-coilovers-for-2006-2010-hyundai-elantra-hd","title":"SF Racing Sport Coilovers for 2006-2010 Hyundai Elantra (HD)","description":"\u003cp\u003eLooking for coilovers for your Hyundai Elantra? This SF Racing listing covers the SF Racing Sport Coilovers for 2006-2010 Hyundai Elantra (HD). A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-HY01-03-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 2006-2010 Hyundai Elantra\u003c\/li\u003e\n\u003cli\u003eChassis: HD\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 6 kg\/mm Rear: 4 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: Rubber Rear: Camber Plates: Front: Camber Rear:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner features 32 levels of damping adjustability, allowing precise tuning of rebound and compression with a single adjustment knob.\u003c\/li\u003e\n\u003cli\u003eOur coilovers include hardened rubber top mounts to minimize noise and enhance durability, and some have optional pillowball bushings available to increase steering response even more.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610387245,"sku":"SF-HY01-03-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2006-2010-hyundai-elantra-hd-sf-hy01-03-tr-01-364795.jpg?v=1792147546"},{"product_id":"sf-racing-sport-coilovers-for-1997-2001-lexus-es300-mcv20","title":"SF Racing Sport Coilovers for 1997-2001 Lexus ES300 (MCV20)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 1997-2001 Lexus ES300 (MCV20) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003e1997-2001 Lexus ES300 setup details\u003c\/h3\u003e\u003cp\u003eFront and rear are both true coilovers, which keeps ride height adjustment simple and precise at each corner. Damper bodies are 52mm front and rear. It comes with 8.3 kg\/mm (about 465 lb\/in) springs up front and 3.8 kg\/mm (about 213 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-01-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1997-2001 Lexus ES300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMCV20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 52mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\/mm \/ 3.8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610420013,"sku":"SF-LE04-01-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-1997-2001-lexus-es300-mcv20-sf-le04-01-tr-463637.jpg?v=1792147546"},{"product_id":"sf-racing-sport-coilovers-for-2015-2018-ford-focus-st-mk3-5-c346","title":"SF Racing Sport Coilovers for 2015-2018 Ford Focus ST MK3.5 (C346)","description":"\u003cp\u003eLooking for coilovers for your Ford Focus ST MK3.5? This SF Racing listing covers the SF Racing Sport Coilovers for 2015-2018 Ford Focus ST MK3.5 (C346). A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-FO03-08-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 2015-2018 Ford Focus ST MK3.5\u003c\/li\u003e\n\u003cli\u003eChassis: C346\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 8 kg\/mm Rear: 5 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: Rubber Rear: Rubber\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner of the car has 32 levels (or clicks) of damping adjustability.\u003c\/li\u003e\n\u003cli\u003eThe coilovers also use rubber top mounts to help reduce the noise that typically comes with high performance aftermarket coilovers.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003cli\u003eCamber Plates: Front: Camber Rear: Important Notes: Notes: Fits EU\/JDM-market models only. This vehicle was not sold in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610452781,"sku":"SF-FO03-08-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2015-2018-ford-focus-st-mk35-c346-sf-fo03-08-tr-794543.jpg?v=1792147546"},{"product_id":"sf-racing-sport-coilovers-for-2011-2015-cadillac-cts-wagon-awd","title":"SF Racing Sport Coilovers for 2011-2015 Cadillac CTS Wagon AWD","description":"\u003cp\u003eIf you want a lower, tighter 2011-2015 Cadillac CTS Wagon without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings. This version is listed for AWD models.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2011-2015 Cadillac CTS Wagon\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 50mm front and rear. It comes with 14 kg\/mm (about 784 lb\/in) springs up front and 10 kg\/mm (about 560 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for street cars that need a sensible drop and some tuning range, without going to track-level stiffness.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-CD01-07-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2011-2015 Cadillac CTS Wagon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 kg\/mm \/ 10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610485549,"sku":"SF-CD01-07-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2020-cadillac-ct5-rwd-sf-cd01-06-sp-723499_306d1c5f-49c1-4a27-9c67-aaad04614b0e.jpg?v=1792147547"},{"product_id":"sf-racing-sport-coilovers-for-2002-2006-infiniti-g35x-sedan-awd-v35","title":"SF Racing Sport Coilovers for 2002-2006 Infiniti G35X Sedan AWD (V35)","description":"\u003cp\u003eLooking for coilovers for your Infiniti G35X Sedan? This SF Racing listing covers the SF Racing Sport Coilovers for 2002-2006 Infiniti G35X Sedan AWD (V35). A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003eChassis: V35\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 14.5 kg\/mm Rear: 10 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: Rubber Rear: Rubber\u003c\/li\u003e\n\u003cli\u003eCamber Plates: Front: Pillowball Rear: Pillowball\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner features 32 levels of damping adjustability, allowing precise tuning of rebound and compression with a single adjustment knob.\u003c\/li\u003e\n\u003cli\u003eOur coilovers include hardened rubber top mounts to minimize noise and enhance durability, and some have optional pillowball bushings available to increase steering response even more.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610518317,"sku":"SF-IF02-11-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2009-2015-infiniti-g37x-awd-v36-sf-if02-11-tr-01-254329.jpg?v=1792147548"},{"product_id":"sf-racing-sport-coilovers-for-2013-2018-lexus-es200-xv60","title":"SF Racing Sport Coilovers for 2013-2018 Lexus ES200 (XV60)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 2013-2018 Lexus ES200 (XV60) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003e2013-2018 Lexus ES200 setup details\u003c\/h3\u003e\u003cp\u003eFront and rear are both true coilovers, which keeps ride height adjustment simple and precise at each corner. Damper bodies are 52mm front and rear. It comes with 8.3 kg\/mm (about 465 lb\/in) springs up front and 3.8 kg\/mm (about 213 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-09-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2013-2018 Lexus ES200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXV60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 52mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\/mm \/ 3.8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610649389,"sku":"SF-LE04-09-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-1991-1997-lexus-es300-xv10-sf-le04-10-sp-29168270344276.jpg?v=1792147551"},{"product_id":"sf-racing-sport-coilovers-for-2013-peugeot-208-5-door-a9","title":"SF Racing Sport Coilovers for 2013+ Peugeot 208 5-Door (A9)","description":"\u003cp\u003eThis SF Racing coilover kit is listed for the 2013+ Peugeot 208 5-Door (A9). A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-PE02-05-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 2013+ Peugeot 208 5-Door\u003c\/li\u003e\n\u003cli\u003eChassis: A9\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 8 kg\/mm Rear: 4 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: OEM Rear: Camber Plates: Front: - Rear: Notes:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner features 32 levels of damping adjustability, allowing precise tuning of rebound and compression with a single adjustment knob.\u003c\/li\u003e\n\u003cli\u003eOur coilovers include hardened rubber top mounts to minimize noise and enhance durability, and some have optional pillowball bushings available to increase steering response even more.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610682157,"sku":"SF-PE02-05-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2013-peugeot-208-5-door-a9-sf-pe02-05-tr-02-142874_f891f888-554b-454f-9226-c4acbd01f30d.jpg?v=1792147550"},{"product_id":"sf-racing-replacement-damper-for-sport-coilovers","title":"SF Racing Replacement Damper for Sport Coilovers","description":"\u003cp\u003eSF Racing Replacement Damper for Sport Coilovers, listed for the Sport Coilovers. A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne replacement strut for SF Racing Sport Coilovers. Please provide your original order number with us to place your order. Struts are sold individually.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610714925,"sku":"SF-STRUT-SP","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-replacement-damper-sf-rep-strut-527766.jpg?v=1792147551"},{"product_id":"sf-racing-sport-coilovers-for-2010-2018-audi-a1-8x-a05","title":"SF Racing Sport Coilovers for 2010-2018 Audi A1 (8X\/A05)","description":"\u003cp\u003eSF Racing Sport Coilovers for 2010-2018 Audi A1 (8X\/A05), listed for the 2010-2018 Audi A1. Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-AU01-01-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 2010-2018 Audi A1\u003c\/li\u003e\n\u003cli\u003eChassis: 8X\/A05\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 6 kg\/mm Rear: 4 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: OEM Rear: OEM\u003c\/li\u003e\n\u003cli\u003eCamber Plates: Front: - Rear: Notes:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner of the car has 32 levels (or clicks) of damping adjustability.\u003c\/li\u003e\n\u003cli\u003eThe coilovers also use rubber top mounts to help reduce the noise that typically comes with high performance aftermarket coilovers.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610747693,"sku":"SF-AU01-01-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2010-2018-audi-a1-8xa05-sf-au01-01-tr-776498.jpg?v=1792147551"},{"product_id":"sf-racing-sport-coilovers-for-1993-1999-fiat-punto-176","title":"SF Racing Sport Coilovers for 1993-1999 Fiat Punto (176)","description":"\u003cp\u003eThis SF Racing coilover kit is listed for the 1993-1999 Fiat Punto (176). Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Ride Height – Lowers 1-2.5 inches below factory height without sacrificing suspension travel.\u003c\/li\u003e\n\u003cli\u003ePart Number: SF-FI01-01-TR\u003c\/li\u003e\n\u003cli\u003eVehicle: 1993-1999 Fiat Punto\u003c\/li\u003e\n\u003cli\u003eChassis: 176\u003c\/li\u003e\n\u003cli\u003eDamper Model: Sport Series\u003c\/li\u003e\n\u003cli\u003eDamping Adjustability: 1-Way: Rebound and Compression\u003c\/li\u003e\n\u003cli\u003eDamper Size: 52mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: Front: 6 kg\/mm Rear: 7 kg\/mm\u003c\/li\u003e\n\u003cli\u003eTop Mounts: Front: Rubber Rear: Camber Plates: Front: Camber Rear:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach corner of the car has 32 levels (or clicks) of damping adjustability.\u003c\/li\u003e\n\u003cli\u003eThe coilovers also use rubber top mounts to help reduce the noise that typically comes with high performance aftermarket coilovers.\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On Replacement – No modifications required (unless otherwise stated in the Specifications data).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610780461,"sku":"SF-FI01-01-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-1993-1999-fiat-punto-176-sf-fi01-01-tr-349148.jpg?v=1792147551"},{"product_id":"sf-racing-sport-coilovers-for-1987-1993-daihatsu-charade-g100","title":"SF Racing Sport Coilovers for 1987-1993 Daihatsu Charade (G100)","description":"\u003cp\u003eIf you want a lower, tighter 1987-1993 Daihatsu Charade (G100) without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings.\u003c\/p\u003e\n\u003ch3\u003e1987-1993 Daihatsu Charade setup details\u003c\/h3\u003e\u003cp\u003eBoth ends use a true coilover layout, with the spring sitting on the damper body at every corner. Damper bodies are 52mm front and rear. It comes with 5 kg\/mm (about 280 lb\/in) springs up front and 3.8 kg\/mm (about 213 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option. At the rear, the mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-DA02-01-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1987-1993 Daihatsu Charade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eG100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 52mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 kg\/mm \/ 3.8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67654610813229,"sku":"SF-DA02-01-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-1992-1999-bmw-3-series-rwd-e36-sf-bm02-02-sp-364923_77f78368-f419-4676-ad83-8d5a67e67184.webp?v=1792147551"},{"product_id":"sf-racing-air-struts-for-2003-2008-volkswagen-golf-mk5-fwd-1k","title":"SF Racing Air Struts for 2003-2008 Volkswagen Golf MK5 FWD (1K)","description":"\u003cp\u003eWith these SF Racing Air Struts, the 2003-2008 Volkswagen Golf MK5 (1K) can sit low for shows and still lift up for real-world roads, because each corner rides on an air spring instead of a fixed coil. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003e2003-2008 Volkswagen Golf MK5 setup details\u003c\/h3\u003e\u003cp\u003eDamper bodies are 52mm front and 46mm rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for owners who want a low parked stance and practical ride height for driving.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-VW01-05-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2003-2008 Volkswagen Golf MK5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"49.5mm","offer_id":67656077476141,"sku":"SF-VW01-05-AS","price":1795.0,"currency_code":"USD","in_stock":true},{"title":"54.5mm","offer_id":67656077508909,"sku":"SF-VW01-05-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-air-struts-for-2003-2008-volkswagen-golf-gti-mk5-fwd-1k-1194309472.jpg?v=1792162573"},{"product_id":"sf-racing-air-struts-for-1993-2000-fiat-coupe-175","title":"SF Racing Air Struts for 1993-2000 Fiat Coupe 175","description":"\u003cp\u003eThese SF Racing Air Struts for the 1993-2000 Fiat Coupe Type 175 give adjustable, on-demand ride height. They are the air suspension half of an air ride setup; you also need management to run them. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 1993-2000 Fiat Coupe Type 175\u003c\/h3\u003e\u003cp\u003eDamper bodies are 52mm front and 46mm rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to show and street cars that need to sit low but still clear driveways, ramps and speed bumps.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-FI03-01-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1993-2000 Fiat Coupe Type 175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656077541677,"sku":"SF-FI03-01-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-air-struts-for-1993-2000-fiat-coupe-175-sf-fi03-01-as-1194309479.jpg?v=1792162573"}],"url":"https:\/\/lowerhq.com\/collections\/sf-racing-coilovers.oembed?page=3","provider":"LowerHQ","version":"1.0","type":"link"}