{"title":"Mazda 6 Coilovers \u0026 Suspension","description":"\u003cp\u003eCoilovers, springs, sway bars, control arms and other suspension parts for the Mazda 6. We list 38 parts: 12 coilover kits, 2 air suspension parts, 4 spring kits, 1 sway bar part, 18 control arm, bushing and alignment parts, from SF Racing, Godspeed, Megan Racing and Whiteline. Each product title lists the exact years, trim and chassis code, so match those before you order.\u003c\/p\u003e","products":[{"product_id":"godspeed-mazda6-gh-2009-13-coilovers","title":"Godspeed Mazda6 (GH) 2009-13 Coilovers","description":"\u003cp\u003eGodspeed Mazda6 (GH) 2009-13 Coilovers. A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 0R2P2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDamping Levels: 40-Level\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment: Yes\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Front): 12 kg\/mm (672 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Rear): 6 kg\/mm (336 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Length(Front): 180 mm\u003c\/li\u003e\n\u003cli\u003eSpring Length(Rear): 185 mm\u003c\/li\u003e\n\u003cli\u003eFront Top Mount: Yes, Standard Type\u003c\/li\u003e\n\u003cli\u003eRear Top Mount: Yes, Standard Type\u003c\/li\u003e\n\u003cli\u003eSpring Inner Diameter(Front): 62 mm (2.44 inch)\u003c\/li\u003e\n\u003cli\u003eSpring Inner Diameter(Rear): 62 mm (2.44 inch)\u003c\/li\u003e\n\u003cli\u003eUser Guide: Coilover User Guide\u003c\/li\u003e\n\u003cli\u003eDamping Levels: 16-Level\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Front): 8 kg\/mm (448 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Length(Front): 200 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSpecial Notes: Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1\/4-3\/8in).\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"MAXX","offer_id":67651595698477,"sku":"0R2P2","price":990.0,"currency_code":"USD","in_stock":true},{"title":"MonoSS","offer_id":67651595731245,"sku":"0R2MT","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/915360244575b8ddf8908ba6.jpg?v=1792090235"},{"product_id":"godspeed-mazda6-gj-gl-2014-2017-coilovers-after-5-13-2013","title":"Godspeed Mazda6 (GJ\/GL) 2014-2017 Coilovers (after 5\/13\/2013)","description":"\u003cp\u003eThis Godspeed listing covers the Godspeed Mazda6 (GJ\/GL) 2014-2017 Coilovers (after 5\/13\/2013). Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 10K61\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDamping Levels: 40-Level\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment: Yes\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Front): 8 kg\/mm (448 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Rear): 5.7 kg\/mm (319 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Length(Front): 200 mm\u003c\/li\u003e\n\u003cli\u003eSpring Length(Rear): 210 mm\u003c\/li\u003e\n\u003cli\u003eFront Top Mount: Yes, Pillow Ball w\/ Camber Plate\u003c\/li\u003e\n\u003cli\u003eRear Top Mount: Yes, Standard Type\u003c\/li\u003e\n\u003cli\u003eSpring Inner Diameter(Front): 62 mm (2.44 inch)\u003c\/li\u003e\n\u003cli\u003eSpring Inner Diameter(Rear): 62 mm (2.44 inch)\u003c\/li\u003e\n\u003cli\u003eUser Guide: Coilover User Guide\u003c\/li\u003e\n\u003cli\u003eDamping Levels: 16-Level\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Rear): 7 kg\/mm (392 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Length(Rear): 190 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSpecial Notes: Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1\/4-3\/8in).\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eListed fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2014-2017 MAXX\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"2014-2017, MonoSS","offer_id":67651598876973,"sku":"10K61","price":750.0,"currency_code":"USD","in_stock":true},{"title":"2014, MonoSS","offer_id":67651598909741,"sku":"9CGVI","price":750.0,"currency_code":"USD","in_stock":true},{"title":"2014-2017 MAXX","offer_id":67651598942509,"sku":"0R2P3","price":990.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/1015351195465b8010ba8ffa7.jpg?v=1792090268"},{"product_id":"godspeed-mazda6-gg1-2003-08-coilovers","title":"Godspeed Mazda6 (GG1) 2003-08 Coilovers","description":"\u003cp\u003eThis Godspeed coilover kit is listed with its fitment details below. Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 1FN6M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDamping Levels: 40-Level\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment: Yes\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Front): 12 kg\/mm (672 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Rear): 6 kg\/mm (336 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Length(Front): 180 mm\u003c\/li\u003e\n\u003cli\u003eSpring Length(Rear): 185 mm\u003c\/li\u003e\n\u003cli\u003eFront Top Mount: Yes, Standard Type\u003c\/li\u003e\n\u003cli\u003eRear Top Mount: Yes, Standard Type\u003c\/li\u003e\n\u003cli\u003eSpring Inner Diameter(Front): 62 mm (2.44 inch)\u003c\/li\u003e\n\u003cli\u003eSpring Inner Diameter(Rear): 62 mm (2.44 inch)\u003c\/li\u003e\n\u003cli\u003eUser Guide: Coilover User Guide\u003c\/li\u003e\n\u003cli\u003eDamping Levels: 16-Level\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Front): 10 kg\/mm (560 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Rear): 8 kg\/mm (448 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Length(Front): 200 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSpecial Notes: Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1\/4-3\/8in).\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"MAXX","offer_id":67651620274477,"sku":"1FN6M","price":990.0,"currency_code":"USD","in_stock":false},{"title":"MonoSS","offer_id":67651620307245,"sku":"1FN03","price":750.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mmx3080_1_2.jpg?v=1792090687"},{"product_id":"godspeed-mazda-626-ge-1993-97-monoss-coilovers","title":"Godspeed Mazda 626 (GE) 1993-97 MonoSS Coilovers","description":"\u003cp\u003eThis Godspeed coilover kit is listed for the Mazda 626. Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Mazda 626\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 9CH3F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDamping Levels: 16-Level\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment: Yes\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Front): 6 kg\/mm (336 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Rear): 6 kg\/mm (336 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Length(Front): 200 mm\u003c\/li\u003e\n\u003cli\u003eSpring Length(Rear): 220 mm\u003c\/li\u003e\n\u003cli\u003eFront Top Mount: Yes, Pillow Ball w\/ Camber Plate\u003c\/li\u003e\n\u003cli\u003eRear Top Mount: Yes, Standard Type\u003c\/li\u003e\n\u003cli\u003eSpring Inner Diameter(Front): 62 mm (2.44 inch)\u003c\/li\u003e\n\u003cli\u003eSpring Inner Diameter(Rear): 62 mm (2.44 inch)\u003c\/li\u003e\n\u003cli\u003eUser Guide: Coilover User Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSpecial Notes: Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1\/4-3\/8in).\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67651620733229,"sku":"9CH3F","price":750.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/1_5_7_1_1.jpg?v=1792090692"},{"product_id":"megan-racing-coilover-damper-kit-ezii-for-mazda6-2003-2008-spring-rates-f-10kg-mm-r-8kg-mm-mr-cdk-mazda6-ezii","title":"Megan Racing Coilover Damper Kit EZII for Mazda6 2003-2008 Spring Rates F:10kg\/mm R:8kg\/mm MR-CDK-MAZDA6-EZII","description":"\u003cp\u003eThis Megan Racing coilover kit is listed with its fitment details below. A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MR-CDK-MAZDA6-EZII\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eF: 10kg\/mm\u003c\/li\u003e\n\u003cli\u003eR: 8kg\/mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eListed fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2004 - 2008 Mazda 3 GX, GS, S, GT, i\u003c\/li\u003e\n\u003cli\u003e2007 - 2008 Mazda 3 Mazdaspeed\u003c\/li\u003e\n\u003cli\u003e2005 Mazda 3 SP23\u003c\/li\u003e\n\u003cli\u003e2014 - 2017 Mazda 6 Grand Touring, Touring, GX, Sport\u003c\/li\u003e\n\u003cli\u003e2008 - 2017 Mazda 6 GT, GS\u003c\/li\u003e\n\u003cli\u003e2003 - 2016 Mazda 6 i\u003c\/li\u003e\n\u003cli\u003e2017 Mazda 6 I Sport, i Grand Touring\u003c\/li\u003e\n\u003cli\u003e2006 - 2007 Mazda 6 Mazdaspeed\u003c\/li\u003e\n\u003cli\u003e2003 - 2008 Mazda 6 S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67652313809197,"sku":"0PCWM","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mr-cdk-mazda6-ezii-1.jpg?v=1792096770"},{"product_id":"megan-racing-coilover-damper-kit-ezii-series-for-mazda6-2014-2017-mr-cdk-mazda613-ezii","title":"MEGAN RACING Coilover Damper Kit EZII Series for Mazda6 2014-2017 - MR-CDK-MAZDA613-EZII","description":"\u003cp\u003eMEGAN RACING Coilover Damper Kit EZII Series for Mazda6 2014-2017 - MR-CDK-MAZDA613-EZII, listed for the 2014-2017 Mazda6. Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Kit EZII Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e 2014-2017 Mazda6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MR-CDK-MAZDA613-EZII\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67652315906349,"sku":"15B15","price":849.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mr-cdk-mazda613-ezii-2.jpg?v=1792096801"},{"product_id":"sf-racing-air-struts-for-2002-2008-mazda-6-gg","title":"SF Racing Air Struts for 2002-2008 Mazda 6 (GG)","description":"\u003cp\u003eSF Racing Air Struts replace the factory struts on the 2002-2008 Mazda 6 (GG) with air-sprung units, so ride height is set with air pressure: low when parked, raised for driveways and speed bumps. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2002-2008 Mazda 6\u003c\/h3\u003e\u003cp\u003eDamper bodies are 50mm front and rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for owners who want a low parked stance and practical ride height for driving.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA05-01-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2002-2008 Mazda 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656080884013,"sku":"SF-MA05-01-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-air-struts-for-2002-2008-mazda-6-gg-sf-ma05-01-as-1194309195.jpg?v=1792162639"},{"product_id":"sf-racing-air-struts-for-2014-mazda-6-gj-gl","title":"SF Racing Air Struts for 2014+ Mazda 6 (GJ\/GL)","description":"\u003cp\u003eWith these SF Racing Air Struts, the 2014+ Mazda 6 (GJ\/GL) can sit low for shows and still lift up for real-world roads, because each corner rides on an air spring instead of a fixed coil.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2014+ Mazda 6\u003c\/h3\u003e\u003cp\u003eDamper bodies are 52mm front and 46mm rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option. At the rear, the mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to show and street cars that need to sit low but still clear driveways, ramps and speed bumps.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA05-03-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2014+ Mazda 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGJ\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Strut Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656114700589,"sku":"SF-MA05-03-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-air-struts-for-2014-mazda-6-gj-gl-sf-ma05-03-as-1194307580.jpg?v=1792163201"},{"product_id":"sf-racing-air-struts-for-1994-1997-mazda-626-cg","title":"SF Racing Air Struts for 1994-1997 Mazda 626 (CG)","description":"\u003cp\u003eThese SF Racing Air Struts for the 1994-1997 Mazda 626 (CG) give adjustable, on-demand ride height. They are the air suspension half of an air ride setup; you also need management to run them.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eDamper bodies are 52mm front and rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option. At the rear, the mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for owners who want a low parked stance and practical ride height for driving.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA18-07-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1994-1997 Mazda 626 (CG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Strut Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 52mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656151925037,"sku":"SF-MA18-06-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-air-struts-for-1997-2005-mazda-626-gf-gw-sf-ma18-06-as-1194306729.jpg?v=1792163582"},{"product_id":"sf-racing-n2-coilovers-for-2002-2008-mazda-6-gg","title":"SF Racing N2 Coilovers for 2002-2008 Mazda 6 (GG)","description":"\u003cp\u003eThe N2 is the top of SF Racing's coilover range: external-reservoir dampers with separate rebound and compression adjustment, here built for the 2002-2008 Mazda 6 (GG). This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003e2002-2008 Mazda 6 setup details\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 50mm front and rear. It comes with 14 kg\/mm (about 784 lb\/in) springs up front and 6.5 kg\/mm (about 364 lb\/in) at the rear. Rebound and compression are adjusted separately (2-way), so you can tune how the car settles over bumps independently from how it reacts to them. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for high-performance builds that have outgrown 1-way adjustable coilovers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA05-01-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2002-2008 Mazda 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN2 External Reservoir Coilovers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 kg\/mm \/ 6.5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656164671789,"sku":"SF-MA05-01-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-2002-2008-mazda-6-gg-1194305356.jpg?v=1792164069"},{"product_id":"sf-racing-track-coilovers-for-1994-1997-mazda-626-cg","title":"SF Racing Track Coilovers for 1994-1997 Mazda 626 (CG)","description":"\u003cp\u003eFor a 1994-1997 Mazda 626 (CG) that sees track days as well as the commute, the SF Racing Track Coilovers add firmer valving on top of full height and damping adjustment.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eFront and rear are both true coilovers, which keeps ride height adjustment simple and precise at each corner. Damper bodies are 52mm front and rear. It comes with 7.2 kg\/mm (about 403 lb\/in) springs up front and 5 kg\/mm (about 280 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option. At the rear, the mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for dual-duty cars that commute during the week and hit the track on weekends.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA18-06-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1994-1997 Mazda 626 (CG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 52mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2 kg\/mm \/ 5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656195801389,"sku":"SF-MA18-06-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-1994-1997-mazda-626-cg-sf-ma18-06-tr-1194304330.jpg?v=1792164494"},{"product_id":"sf-racing-track-coilovers-for-1997-2005-mazda-626-gf-gw","title":"SF Racing Track Coilovers for 1997-2005 Mazda 626 (GF\/GW)","description":"\u003cp\u003eFor a 1997-2005 Mazda 626 (GF\/GW) that sees track days as well as the commute, the SF Racing Track Coilovers add firmer valving on top of full height and damping adjustment.\u003c\/p\u003e\n\u003ch3\u003e1997-2005 Mazda 626 setup details\u003c\/h3\u003e\u003cp\u003eFront and rear are both true coilovers, which keeps ride height adjustment simple and precise at each corner. Damper bodies are 52mm front and rear. It comes with 7.2 kg\/mm (about 403 lb\/in) springs up front and 5 kg\/mm (about 280 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option. At the rear, the mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to cars that do track days, autocross or spirited back-road driving, and owners who accept a firmer ride for more control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA18-07-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1997-2005 Mazda 626\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGF\/GW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 52mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2 kg\/mm \/ 5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656196030765,"sku":"SF-MA18-07-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-1997-2005-mazda-626-gf-gw-sf-ma18-07-tr-1194304334.jpg?v=1792164494"},{"product_id":"sf-racing-sport-coilovers-for-2007-2013-mazda-6-gh","title":"SF Racing Sport Coilovers for 2007-2013 Mazda 6 (GH)","description":"\u003cp\u003eBuilt for daily-driven cars, this SF Racing Sport kit replaces the factory struts and springs on the 2007-2013 Mazda 6 (GH) with height-adjustable coilovers and single-knob damping adjustment. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2007-2013 Mazda 6\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 50mm front and 46mm rear. It comes with 14 kg\/mm (about 784 lb\/in) springs up front and 8.5 kg\/mm (about 476 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA05-02-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2007-2013 Mazda 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 kg\/mm \/ 8.5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656216379693,"sku":"SF-MA05-02-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2007-2013-mazda-6-gh-sf-ma05-02-sp-1194301723.jpg?v=1792165194"},{"product_id":"sf-racing-track-coilovers-for-2002-2008-mazda-6-gg","title":"SF Racing Track Coilovers for 2002-2008 Mazda 6 (GG)","description":"\u003cp\u003eFor a 2002-2008 Mazda 6 (GG) that sees track days as well as the commute, the SF Racing Track Coilovers add firmer valving on top of full height and damping adjustment. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003e2002-2008 Mazda 6 setup details\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 50mm front and rear. It comes with 14 kg\/mm (about 784 lb\/in) springs up front and 6.5 kg\/mm (about 364 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal if body control and response matter more to you than the softest possible ride.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA05-01-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2002-2008 Mazda 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 kg\/mm \/ 6.5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Front: 14K \/ Rear: 6.5K","offer_id":67656261402925,"sku":"SF-MA05-01-TR","price":1095.0,"currency_code":"USD","in_stock":true},{"title":"Front: 14K \/ Rear: 8.5K","offer_id":67656261435693,"sku":"SF-MA05-01-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2002-2008-mazda-6-gg-1194297830.jpg?v=1792166630"},{"product_id":"sf-racing-track-coilovers-for-2007-2013-mazda-6-gh","title":"SF Racing Track Coilovers for 2007-2013 Mazda 6 (GH)","description":"\u003cp\u003eFor a 2007-2013 Mazda 6 (GH) that sees track days as well as the commute, the SF Racing Track Coilovers add firmer valving on top of full height and damping adjustment. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003e2007-2013 Mazda 6 setup details\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 50mm front and 46mm rear. It comes with 14 kg\/mm (about 784 lb\/in) springs up front and 8.5 kg\/mm (about 476 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal if body control and response matter more to you than the softest possible ride.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA05-02-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2007-2013 Mazda 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 kg\/mm \/ 8.5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656264646957,"sku":"SF-MA05-02-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2007-2013-mazda-6-gh-sf-ma05-02-tr-1194297243.jpg?v=1792166738"},{"product_id":"sf-racing-track-coilovers-for-2014-mazda-6-gj-gl","title":"SF Racing Track Coilovers for 2014+ Mazda 6 (GJ\/GL)","description":"\u003cp\u003eFor a 2014+ Mazda 6 (GJ\/GL) that sees track days as well as the commute, the SF Racing Track Coilovers add firmer valving on top of full height and damping adjustment.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 8 kg\/mm (about 448 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option. At the rear, the mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal if body control and response matter more to you than the softest possible ride.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA05-03-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2014+ Mazda 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGJ\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656274149677,"sku":"SF-MA05-03-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2014-mazda-6-gj-gl-sf-ma05-03-tr-1194296007.jpg?v=1792167114"},{"product_id":"sf-racing-sport-coilovers-for-1997-2005-mazda-626-gf-gw","title":"SF Racing Sport Coilovers for 1997-2005 Mazda 626 (GF\/GW)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 1997-2005 Mazda 626 (GF\/GW) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day.\u003c\/p\u003e\n\u003ch3\u003e1997-2005 Mazda 626 setup details\u003c\/h3\u003e\u003cp\u003eIt is a true coilover at all four corners, so the spring and damper work as one unit front and rear. Damper bodies are 52mm front and rear. It comes with 7.2 kg\/mm (about 403 lb\/in) springs up front and 5 kg\/mm (about 280 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option. At the rear, the mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA18-07-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1997-2005 Mazda 626\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGF\/GW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 52mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2 kg\/mm \/ 5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656355905837,"sku":"SF-MA18-07-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-1997-2005-mazda-626-gf-gw-sf-ma18-07-sp-1194290021.jpg?v=1792170258"},{"product_id":"sf-racing-sport-coilovers-for-1994-1997-mazda-626-cg","title":"SF Racing Sport Coilovers for 1994-1997 Mazda 626 (CG)","description":"\u003cp\u003eIf you want a lower, tighter 1994-1997 Mazda 626 (CG) without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings.\u003c\/p\u003e\n\u003ch3\u003e1994-1997 Mazda 626 (CG) setup details\u003c\/h3\u003e\u003cp\u003eIt is a true coilover at all four corners, so the spring and damper work as one unit front and rear. Damper bodies are 52mm front and rear. It comes with 7.2 kg\/mm (about 403 lb\/in) springs up front and 5 kg\/mm (about 280 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option. At the rear, the mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA18-06-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1994-1997 Mazda 626 (CG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 52mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2 kg\/mm \/ 5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ True Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656356200749,"sku":"SF-MA18-06-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-1994-1997-mazda-626-cg-sf-ma18-06-sp-1194290019.jpg?v=1792170318"},{"product_id":"sf-racing-sport-coilovers-for-2014-mazda-6-gj-gl","title":"SF Racing Sport Coilovers for 2014+ Mazda 6 (GJ\/GL)","description":"\u003cp\u003eIf you want a lower, tighter 2014+ Mazda 6 (GJ\/GL) without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 8 kg\/mm (about 448 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option. At the rear, the mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA05-03-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2014+ Mazda 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGJ\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656432091437,"sku":"SF-MA05-03-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2014-mazda-6-gj-gl-sf-ma05-03-sp-1194284917.jpg?v=1792172483"},{"product_id":"sf-racing-sport-coilovers-for-2002-2008-mazda-6-gg","title":"SF Racing Sport Coilovers for 2002-2008 Mazda 6 (GG)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 2002-2008 Mazda 6 (GG) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 50mm front and rear. It comes with 14 kg\/mm (about 784 lb\/in) springs up front and 6.5 kg\/mm (about 364 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for street cars that need a sensible drop and some tuning range, without going to track-level stiffness.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-MA05-01-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2002-2008 Mazda 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 kg\/mm \/ 6.5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Front: 14K \/ Rear: 6.5K","offer_id":67656450310445,"sku":"SF-MA05-01-SP","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Front: 14K \/ Rear: 8.5K","offer_id":67656450343213,"sku":"SF-MA05-01-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2002-2008-mazda-6-gg-1194283363.jpg?v=1792172795"},{"product_id":"godspeed-mazda6-gh-2009-13-adjustable-front-camber-arms-with-ball-joints","title":"Godspeed Mazda6 (GH) 2009-13 Adjustable Front Camber Arms With Ball Joints","description":"\u003cp\u003eGodspeed Mazda6 (GH) 2009-13 Adjustable Front Camber Arms With Ball Joints. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 1FNFY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eLegal Disclaimer: Please note that this product is intended for competition and show use only.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67656556183853,"sku":"1FNFY","price":240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/d515580096635cdd573f0110b.jpg?v=1792177740"},{"product_id":"megan-racing-hardened-rubber-rear-toe-control-arm-for-mazda-6-2009-to-2013-mrs-mz-0370","title":"Megan Racing Hardened Rubber Rear Toe Control Arm for Mazda 6 2009 to 2013 MRS-MZ-0370","description":"\u003cp\u003eMegan Racing Hardened Rubber Rear Toe Control Arm for Mazda 6 2009 to 2013 MRS-MZ-0370, listed for the Mazda 6 2009 to 2013 MRS-MZ-0370. Upgraded or replacement arms restore or correct suspension geometry, which shows up as better tire wear and a more planted car.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Mazda 6 2009 to 2013 MRS-MZ-0370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MRS-MZ-0370\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67659082924333,"sku":"0R9TR","price":173.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mrs-mz-0370-1.jpg?v=1792230443"},{"product_id":"megan-racing-rear-toe-control-arm-for-mazda-3-6-2014-hardened-rubber-2pcs","title":"Megan Racing Rear Toe Control Arm for Mazda 3\/6 2014+ - Hardened Rubber 2pcs","description":"\u003cp\u003eLooking for suspension arms for your Mazda 3\/6 2014+? This Megan Racing listing covers the Megan Racing Rear Toe Control Arm for Mazda 3\/6 2014+ - Hardened Rubber 2pcs. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Mazda 3\/6 2014+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 0QGWZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67659084398893,"sku":"0QGWZ","price":146.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/1088084_Megan_20Racing_MRS-MZ-0271_MS01-01_2x_6e2baf47-9166-4ebf-bc18-ef202870ddc8.jpg?v=1792230455"},{"product_id":"megan-racing-rear-toe-control-arm-for-mazda-6-2002-2008-hardened-rubber-2pcs-mrs-mz-1270","title":"Megan Racing Rear Toe Control Arm for Mazda 6 2002-2008 Hardened Rubber 2pcs MRS-MZ-1270","description":"\u003cp\u003eMegan Racing Rear Toe Control Arm for Mazda 6 2002-2008 Hardened Rubber 2pcs MRS-MZ-1270, listed for the Mazda 6 2002-2008 Hardened Rubber 2pcs MRS-MZ-1270. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Mazda 6 2002-2008 Hardened Rubber 2pcs MRS-MZ-1270\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MRS-MZ-1270\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSpecifications: Mazda 6 02-08\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67659084890413,"sku":"0R9TW","price":173.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mrs-mz-1270-1.jpg?v=1792230457"},{"product_id":"megan-racing-rear-toe-control-arm-for-mazda6-2013-hardened-rubber-mrs-mz-0271-ii","title":"Megan Racing Rear Toe Control Arm for Mazda6 2013+ (Hardened Rubber) - MRS-MZ-0271-II","description":"\u003cp\u003eThis Megan Racing suspension arm is listed for the Mazda6 2013+. Upgraded or replacement arms restore or correct suspension geometry, which shows up as better tire wear and a more planted car.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Mazda6 2013+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MRS-MZ-0271-II\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67659088724269,"sku":"8M3BQ","price":146.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mrs-mz-0271-1_2.jpg?v=1792230543"},{"product_id":"whiteline-camber-correction-control-arm-upper-bushings-mazda-6-2003-2008","title":"Whiteline Camber Correction Control Arm Upper Bushings Mazda 6 2003-2008","description":"\u003cp\u003eLooking for bushings for your Mazda 6? This Whiteline listing covers the Whiteline Camber Correction Control Arm Upper Bushings Mazda 6 2003-2008. Bushings are a cheap way to tighten up an older car that clunks over bumps or wanders under braking.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Whiteline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Mazda 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 09MZ8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustment: Adds +\/- 0.5deg\u003c\/li\u003e\n\u003cli\u003ePosition: Front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eListed fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2008 Mazda 6 GS, GT\u003c\/li\u003e\n\u003cli\u003e2006 - 2007 Mazda 6 Mazdaspeed\u003c\/li\u003e\n\u003cli\u003e2003 - 2008 Mazda 6 S, i\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Pressed-in bushings may need a press or a shop to fit.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67659106091309,"sku":"09MZ8","price":152.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/217575_Whiteline_W53398_MG01-01.jpg?v=1792230861"},{"product_id":"megan-racing-lowering-springs-for-mazda6-v6-2003-2008-mr-ls-m603v6","title":"Megan Racing Lowering Springs for Mazda6 V6 2003-2008 MR-LS-M603V6","description":"\u003cp\u003eLooking for lowering springs for your Mazda6 V6? This Megan Racing listing covers the Megan Racing Lowering Springs for Mazda6 V6 2003-2008 MR-LS-M603V6. A spring set like this lowers the car to a fixed height and tightens up body control while keeping the factory damper layout.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Mazda6 V6 2003-2008 MR-LS-M603V6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MR-LS-M603V6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Springs work best on dampers in good condition; plan an alignment after install.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662743503149,"sku":"09D5X","price":189.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mr-ls-m603v6-1.jpg?v=1792344347"},{"product_id":"megan-racing-lowering-springs-front-rear-for-2014-2017-mazda6-drop-37mm-39mm-mr-ls-m614","title":"Megan Racing Lowering Springs Front \u0026 Rear for 2014-2017 Mazda6 Drop 37mm\/39mm - MR-LS-M614","description":"\u003cp\u003eMegan Racing Lowering Springs Front \u0026amp; Rear for 2014-2017 Mazda6 Drop 37mm\/39mm - MR-LS-M614, listed for the 2014-2017 Mazda6 Drop 37mm\/39mm. Lowering springs are the simplest way to drop a car: shorter, usually firmer springs that work with the existing dampers.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e 2014-2017 Mazda6 Drop 37mm\/39mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MR-LS-M614\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFront Lowering Rate: 37mm\u003c\/li\u003e\n\u003cli\u003eRear Lowering Rate: 39mm\u003c\/li\u003e\n\u003cli\u003eNOTE: All Megan Racing products are deemed for \"off-road use only\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Springs work best on dampers in good condition; plan an alignment after install.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662746222893,"sku":"1D1PZ","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mr-ls-m614.jpg?v=1792344394"},{"product_id":"godspeed-traction-s-performance-lowering-springs-for-mazda6-sedan-gh-2-5l-2009-2013","title":"Godspeed Traction-S Performance Lowering Springs For Mazda6 Sedan (GH) 2.5L 2009-2013","description":"\u003cp\u003eThis Godspeed spring set is listed with its fitment details below. A spring set like this lowers the car to a fixed height and tightens up body control while keeping the factory damper layout.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 10PVB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpecial Notes: Lowering varies by engine size, battery package, and model options.\u003c\/li\u003e\n\u003cli\u003eSpring Rate(kg\/mm): Front: 5.53 | Rear: 4.0\u003c\/li\u003e\n\u003cli\u003eAverage Low(Front): 1.5\"\u003c\/li\u003e\n\u003cli\u003eAverage Low(Rear): 1.6\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Springs work best on dampers in good condition; plan an alignment after install.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662769324333,"sku":"10PVB","price":180.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/LS-TS-MA-0007a.jpg?v=1792345632"},{"product_id":"godspeed-traction-s-performance-lowering-springs-for-mazda6-gj-2014-21","title":"Godspeed Traction-S Performance Lowering Springs For Mazda6 (GJ) 2014-21","description":"\u003cp\u003eThis Godspeed listing covers the Godspeed Traction-S Performance Lowering Springs For Mazda6 (GJ) 2014-21. A spring set like this lowers the car to a fixed height and tightens up body control while keeping the factory damper layout.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 10PVC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpecial Notes: Lowering varies by engine size, battery package, and model options.\u003c\/li\u003e\n\u003cli\u003eSpring Rate(kg\/mm): Front: 2.88 | Rear: 4.7\u003c\/li\u003e\n\u003cli\u003eAverage Low(Front): 1.4\"\u003c\/li\u003e\n\u003cli\u003eAverage Low(Rear): 1.5\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Springs work best on dampers in good condition; plan an alignment after install.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662828044589,"sku":"10PVC","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/LS-TS-MA-0008a.jpg?v=1792346610"},{"product_id":"airlift-14-16-mazda6-mazda6-wagon-esatate-all-powertrains-rear-kit","title":"AIRLIFT 14-16 Mazda6 \u0026 Mazda6 Wagon\/Esatate (All Powertrains) - Rear Kit","description":"\u003cp\u003eThis AIRLIFT air suspension part is listed with its fitment details below. With air springs instead of steel coils, ride height is set with air pressure, which is what makes adjustable stance possible on the move.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AIRLIFT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 15850\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDrop = 164mm\/6.5″\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePair of monotube threaded body shocks\u003c\/li\u003e\n\u003cli\u003ePair of double bellows air springs\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Air struts need management (compressor, tank, valves and controller) unless the listing says it is included.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662849966381,"sku":"15850","price":1099.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/115545562525ca8a55c35b32.jpg?v=1792347191"},{"product_id":"megan-racing-rear-camber-kit-for-mazda3-2014-and-mazda6-2014-2pcs-mrs-mz-0211","title":"Megan Racing Rear Camber Kit for Mazda3 2014+ and Mazda6 2014+ 2pcs - MRS-MZ-0211","description":"\u003cp\u003eMegan Racing Rear Camber Kit for Mazda3 2014+ and Mazda6 2014+ 2pcs - MRS-MZ-0211. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MRS-MZ-0211\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662940897581,"sku":"0QGWY","price":206.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/1088083_Megan_20Racing_MRS-MZ-0211_MS01-01_2x_f059b698-5e38-485d-88f4-61cff5331aa2.jpg?v=1792349133"},{"product_id":"megan-racing-hardened-rubber-front-upper-arm-camber-kit-for-mazda-6-2008-2012-2-pieces","title":"Megan Racing Hardened Rubber Front Upper Arm Camber Kit for Mazda 6 2008-2012, 2 Pieces","description":"\u003cp\u003eMegan Racing Hardened Rubber Front Upper Arm Camber Kit for Mazda 6 2008-2012, 2 Pieces. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 0R9TQ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSPECIFICATIONS \u0026amp; FEATURES: Application: Mazda 6 09-12\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThe clock does not lie and having the vehicle alignment can make seconds of a difference.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662941126957,"sku":"0R9TQ","price":407.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mrs-mz-0320-1.jpg?v=1792349135"},{"product_id":"megan-racing-hardened-rubber-rear-upper-arm-camber-kit-for-2002-2008-mazda6-mrs-mz-1210","title":"Megan Racing Hardened Rubber Rear Upper Arm Camber Kit for 2002-2008 Mazda6 - MRS-MZ-1210","description":"\u003cp\u003eMegan Racing Hardened Rubber Rear Upper Arm Camber Kit for 2002-2008 Mazda6 - MRS-MZ-1210, listed for the 2002-2008 Mazda6. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e 2002-2008 Mazda6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MRS-MZ-1210\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSpecification: Mazda 6 02-08\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eWith this you must make sure you have the proper camber, caster and toe as well as make sure they are all working together and not against each other.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662941192493,"sku":"0R9TU","price":218.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mrs-mz-1210-1.jpg?v=1792349135"},{"product_id":"megan-racing-rear-upper-camber-kit-for-mazda-6-gh-2008-2012-hardened-rubber-mrs-mz-0310","title":"Megan Racing Rear Upper Camber Kit for Mazda 6 GH 2008-2012 - Hardened Rubber MRS-MZ-0310","description":"\u003cp\u003eMegan Racing Rear Upper Camber Kit for Mazda 6 GH 2008-2012 - Hardened Rubber MRS-MZ-0310, listed for the 2008-2012 Mazda 6 GH. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e 2008-2012 Mazda 6 GH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MRS-MZ-0310\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSPECIFICATIONS \u0026amp; FEATURES: Application: Mazda6 08-12\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThe clock does not lie and having the vehicle alignment can make seconds of a difference.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662941225261,"sku":"0R9TP","price":218.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/115506264815c6caeb111032.jpg?v=1792349135"},{"product_id":"megan-racing-front-upper-arm-camber-kit-for-2002-2008-mazda-6-gc-gy-hardened-rubber-2pcs-mrs-mz-1220","title":"Megan Racing Front Upper Arm Camber Kit for 2002-2008 Mazda 6 GC-GY, Hardened Rubber, 2pcs MRS-MZ-1220","description":"\u003cp\u003eThis Megan Racing suspension arm is listed with its fitment details below. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MRS-MZ-1220\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eListed fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Focus 1998-present\u003c\/li\u003e\n\u003cli\u003eMazda 3 2004-13\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662941847853,"sku":"0R9TV","price":407.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mrs-mz-1220-1.jpg?v=1792349146"},{"product_id":"megan-racing-rear-camber-kit-for-mazda6-2013-mrs-mz-0211-ii","title":"Megan Racing Rear Camber Kit for Mazda6 2013+ - MRS-MZ-0211-II","description":"\u003cp\u003eThis Megan Racing suspension arm is listed for the Mazda6 2013+. Upgraded or replacement arms restore or correct suspension geometry, which shows up as better tire wear and a more planted car.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Mazda6 2013+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MRS-MZ-0211-II\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662942667053,"sku":"8M3BL","price":206.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mrs-mz-0211-1_2.jpg?v=1792349201"},{"product_id":"godspeed-mazda6-gg-gy-2003-08-adjustable-front-camber-arms-with-ball-joints","title":"Godspeed Mazda6 (GG\/GY) 2003-08 Adjustable Front Camber Arms With Ball Joints","description":"\u003cp\u003eThis Godspeed suspension arm is listed with its fitment details below. Upgraded or replacement arms restore or correct suspension geometry, which shows up as better tire wear and a more planted car.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 1FNFX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eLegal Disclaimer: Please note that this product is intended for competition and show use only.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662948073773,"sku":"1FNFX","price":250.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/ak-174-a.jpg?v=1792349304"},{"product_id":"godspeed-mazda6-gg-gy-2003-08-adjustable-rear-camber-arms-with-spherical-bearings","title":"Godspeed Mazda6 (GG\/GY) 2003-08 Adjustable Rear Camber Arms With Spherical Bearings","description":"\u003cp\u003eThis Godspeed suspension arm is listed with its fitment details below. Upgraded or replacement arms restore or correct suspension geometry, which shows up as better tire wear and a more planted car.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 9CH51\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eLegal Disclaimer: Please note that this product is intended for competition and show use only.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662948172077,"sku":"9CH51","price":180.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/ak-245-a.jpg?v=1792349304"},{"product_id":"whiteline-plus-2-07-8-09-mazda-cx-9-8-02-1-08-mazda-6-front-lwr-inner-rear-control-arm-bushing-kit-w53396","title":"Whiteline Plus 2\/07-8\/09 Mazda CX-9\/8\/02-1\/08 Mazda 6 Front Lwr Inner Rear Control Arm Bushing Kit W53396","description":"\u003cp\u003eWhiteline Plus 2\/07-8\/09 Mazda CX-9\/8\/02-1\/08 Mazda 6 Front Lwr Inner Rear Control Arm Bushing Kit W53396, listed for the 09 Mazda CX-9\/8\/02-1\/08 Mazda. Bushings are a cheap way to tighten up an older car that clunks over bumps or wanders under braking.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Whiteline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e 09 Mazda CX-9\/8\/02-1\/08 Mazda\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 09MZ6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Pressed-in bushings may need a press or a shop to fit.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662958559533,"sku":"09MZ6","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/3dfbc48b96114a90f9dbfd1df7a0cdedL.jpg?v=1792349596"},{"product_id":"godspeed-mazda6-fwd-gg-gy-2003-08-adjustable-rear-toe-arms-with-spherical-bearings","title":"Godspeed Mazda6 FWD (GG\/GY) 2003-08 Adjustable Rear Toe Arms With Spherical Bearings","description":"\u003cp\u003eThis Godspeed suspension arm is listed with its fitment details below. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrivetrain:\u003c\/strong\u003e FWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 9CH2N\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eLegal Disclaimer: Please note that this product is intended for competition and show use only.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67663010627885,"sku":"9CH2N","price":180.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/ak-265_1.jpg?v=1792350371"},{"product_id":"godspeed-mazda6-gj-gl-2014-21-adjustable-rear-arms-with-spherical-bearings","title":"Godspeed Mazda6 (GJ\/GL) 2014-21 Adjustable Rear Arms With Spherical Bearings","description":"\u003cp\u003eGodspeed Mazda6 (GJ\/GL) 2014-21 Adjustable Rear Arms With Spherical Bearings. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 1FNFZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpecial Notes: FOR OFF ROAD USE ONLY! PARTS ARE INTENDED FOR RACING VEHICLES WHICH NEVER MAY BE USED ON A PUBLIC ROAD.\u003c\/li\u003e\n\u003cli\u003eLegal Disclaimer: Please note that this product is intended for competition and show use only.\u003c\/li\u003e\n\u003cli\u003eSpecial Notes: Wheel alignment is necessary after replacing arms and links. For competition and off-road use only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Camber Arms","offer_id":67663010758957,"sku":"1FNFZ","price":180.0,"currency_code":"USD","in_stock":false},{"title":"Toe Arms","offer_id":67663010791725,"sku":"9CH5H","price":150.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/ak-167-b.jpg?v=1792350371"},{"product_id":"godspeed-mazda6-gh-2009-13-adjustable-rear-arms-with-spherical-bearings","title":"Godspeed Mazda6 (GH) 2009-13 Adjustable Rear Arms With Spherical Bearings","description":"\u003cp\u003eThis Godspeed suspension arm is listed with its fitment details below. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 9CH60\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLegal Disclaimer: Please note that this product is intended for competition and show use only.\u003c\/li\u003e\n\u003cli\u003eSpecial Notes: Wheel alignment is necessary after replacing arms and links. For competition and off-road use only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Camber Arms","offer_id":67663024390445,"sku":"9CH60","price":180.0,"currency_code":"USD","in_stock":false},{"title":"Toe Arms","offer_id":67663024423213,"sku":"8M178","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/ak-245-e.jpg?v=1792350518"},{"product_id":"whiteline-rear-sway-bar-24mm-heavy-duty-blade-adjustable-mazda-6-2006-2007","title":"Whiteline Rear Sway Bar 24mm Heavy Duty Blade Adjustable Mazda 6 2006-2007","description":"\u003cp\u003eThis Whiteline sway bar part is listed for the Mazda 6. Sway bars and their links control body roll in corners, which changes how flat the car stays and how it balances front to rear.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Whiteline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Mazda 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 04JF8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRear Sway Bar 24mm Heavy Duty Blade Adjustable Mazda 6 2006-2007\u003c\/li\u003e\n\u003cli\u003eSway Bar Heavy Duty 2Way Blade Adjustable\u003c\/li\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eSize: 24mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWhiteline Swaybars are at the cutting edge of this process through their close association with motorsport.\u003c\/li\u003e\n\u003cli\u003eThe stiffer the bar, the more force required to move the left and right wheels relative to each other.\u003c\/li\u003e\n\u003cli\u003eThis increases the amount of force required to make the body roll.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eListed fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2010 - 2012 Ford Fusion Hybrid, Sport\u003c\/li\u003e\n\u003cli\u003e2006 - 2009 Ford Fusion SEL Plus\u003c\/li\u003e\n\u003cli\u003e2006 - 2012 Ford Fusion SEL, S, SE\u003c\/li\u003e\n\u003cli\u003e2008 - 2016 Mazda 6 GT, GS\u003c\/li\u003e\n\u003cli\u003e2014 - 2016 Mazda 6 GX, Sport, Grand Touring, Touring\u003c\/li\u003e\n\u003cli\u003e2003 - 2016 Mazda 6 i\u003c\/li\u003e\n\u003cli\u003e2006 - 2007 Mazda 6 Mazdaspeed\u003c\/li\u003e\n\u003cli\u003e2003 - 2013 Mazda 6 S\u003c\/li\u003e\n\u003cli\u003e2010 - 2011 Mercury Milan Hybrid\u003c\/li\u003e\n\u003cli\u003e2006 - 2011 Mercury Milan Premier, Base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e On lowered or lifted cars, adjustable end links keep the bar at the right angle.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67663031533869,"sku":"04JF8","price":273.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/94f63b1965e9a461cd9b1ef572752188L.jpg?v=1792350645"},{"product_id":"megan-racing-front-strut-tower-bar-for-2003-2008-mazda6-aluminum-one-piece-race-spec-mr-sb-m603fu-1p","title":"Megan Racing Front Strut Tower Bar for 2003-2008 Mazda6 Aluminum One-Piece Race Spec MR-SB-M603FU-1P","description":"\u003cp\u003eMegan Racing Front Strut Tower Bar for 2003-2008 Mazda6 Aluminum One-Piece Race Spec MR-SB-M603FU-1P, listed for the 2003-2008 Mazda6 Aluminum One-Piece Race Spec MR-SB-M603FU-1P. Braces tie suspension mounting points together so the body flexes less and the suspension can do its job.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e 2003-2008 Mazda6 Aluminum One-Piece Race Spec MR-SB-M603FU-1P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MR-SB-M603FU-1P\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eA must for any track-driven, and a great addition to any street or show car, this bar truly lives up to the Megan Racing name.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eListed fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2008 Mazda 6 GS, GT\u003c\/li\u003e\n\u003cli\u003e2003 - 2008 Mazda 6 i, S\u003c\/li\u003e\n\u003cli\u003e2006 - 2007 Mazda 6 Mazdaspeed\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67665169711405,"sku":"0LCT0","price":129.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mr-sb-m603fu-1p-1.jpg?v=1792372539"},{"product_id":"megan-racing-strut-tower-bar-front-for-mazda-6-2014-and-mazda-3-2014-2018-race-spec-aluminum-one-piece-mr-sb-m614fu-1p","title":"Megan Racing Strut Tower Bar Front for Mazda 6 2014+ and Mazda 3 2014-2018 Race Spec Aluminum One-Piece - MR-SB-M614FU-1P","description":"\u003cp\u003eThis Megan Racing chassis brace is listed with its fitment details below. Bracing is a bolt-on way to sharpen turn-in and make the car feel more connected.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MR-SB-M614FU-1P\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eA must for any track-driven, and a great addition to any street or show car, this bar truly lives up to the Megan Racing name.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eListed fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2016 - 2018 Mazda 3 G\u003c\/li\u003e\n\u003cli\u003e2014 - 2016 Mazda 3 i Grand Touring, I Sport, s Touring\u003c\/li\u003e\n\u003cli\u003e2014 - 2015 Mazda 3 i SV\u003c\/li\u003e\n\u003cli\u003e2014 - 2018 Mazda 3 i, I Touring, S, s Grand Touring, GX, GS, GT\u003c\/li\u003e\n\u003cli\u003e2018 Mazda 3 SE\u003c\/li\u003e\n\u003cli\u003e2017 - 2018 Mazda 3 Sport, Touring, Grand Touring\u003c\/li\u003e\n\u003cli\u003e2014 - 2017 Mazda 6 GT, Grand Touring, GX, GS, Sport, Touring\u003c\/li\u003e\n\u003cli\u003e2014 - 2016 Mazda 6 i\u003c\/li\u003e\n\u003cli\u003e2017 Mazda 6 I Sport, i Grand Touring\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67665173709101,"sku":"0QGRQ","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mr-sb-m614fu-1p-1.jpg?v=1792372652"},{"product_id":"mazda6-tie-rod-tubes-tierod","title":"Mazda6 Tie Rod Tubes - Tierod","description":"\u003cp\u003eThis SLR Speed listing covers the Mazda6 Tie Rod Tubes - Tierod. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SLR Speed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e A.21.011\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"SLRspeed","offers":[{"title":"70mm (2.75 inch) \/ Grey","offer_id":67665411211565,"sku":"sku-41345177354334","price":40.37,"currency_code":"USD","in_stock":true},{"title":"70mm (2.75 inch) \/ Purple","offer_id":67665411244333,"sku":"sku-41345177387102","price":40.37,"currency_code":"USD","in_stock":true},{"title":"89mm (3.5 inch) \/ Grey","offer_id":67665411277101,"sku":"sku-41345177419870","price":40.37,"currency_code":"USD","in_stock":true},{"title":"89mm (3.5 inch) \/ Purple","offer_id":67665411309869,"sku":"sku-41345177452638","price":40.37,"currency_code":"USD","in_stock":true},{"title":"140mm (5.5 inch) \/ Grey","offer_id":67665411342637,"sku":"sku-41345177485406","price":40.37,"currency_code":"USD","in_stock":true},{"title":"140mm (5.5 inch) \/ Purple","offer_id":67665411375405,"sku":"sku-41345177518174","price":40.37,"currency_code":"USD","in_stock":true},{"title":"159mm (6.25 inch) \/ Grey","offer_id":67665411408173,"sku":"sku-41345177550942","price":40.37,"currency_code":"USD","in_stock":true},{"title":"159mm (6.25 inch) \/ Purple","offer_id":67665411440941,"sku":"sku-41345177583710","price":40.37,"currency_code":"USD","in_stock":true},{"title":"180mm (7 inch) \/ Grey","offer_id":67665411473709,"sku":"A.21.011","price":40.37,"currency_code":"USD","in_stock":true},{"title":"180mm (7 inch) \/ Purple","offer_id":67665411506477,"sku":"A.21.010","price":40.37,"currency_code":"USD","in_stock":true},{"title":"205mm (8 inch) \/ Grey","offer_id":67665411539245,"sku":"A.21.015","price":40.37,"currency_code":"USD","in_stock":true},{"title":"205mm (8 inch) \/ Purple","offer_id":67665411572013,"sku":"A.21.014","price":40.37,"currency_code":"USD","in_stock":true},{"title":"230mm (9 inch) \/ Grey","offer_id":67665411604781,"sku":"A.21.026","price":40.37,"currency_code":"USD","in_stock":true},{"title":"230mm (9 inch) \/ Purple","offer_id":67665411637549,"sku":"A.21.025","price":40.37,"currency_code":"USD","in_stock":true},{"title":"255mm (10 inch) \/ Grey","offer_id":67665411670317,"sku":"A.21.063","price":40.37,"currency_code":"USD","in_stock":true},{"title":"255mm (10 inch) \/ Purple","offer_id":67665411703085,"sku":"A.21.062","price":40.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/DSC06317_0a41ab91-aa52-4d22-acf8-0b91e4214a2d.jpg?v=1792376550"},{"product_id":"slr-toe-plates-for-mazda6","title":"SLR Toe Plates for Mazda6","description":"\u003cp\u003eThis SLR Speed part is listed for the Mazda6. This part is listed below with its specifications and fitment details.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SLR Speed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Mazda6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThese super thick and durable 3mm aluminum anodized toe plates allow you to adjust your toe-in or toe-out from either outside or from under your car where you can turn your tape measure sideways.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e*Sold as a pair of toe alignment plates and hardware with the option of a pair of metric tape measures.\u003c\/li\u003e\u003c\/ul\u003e","brand":"SLRspeed","offers":[{"title":"Purple Anodized \/ Yes","offer_id":67665415569709,"sku":"sku-41345176797278","price":99.75,"currency_code":"USD","in_stock":true},{"title":"Purple Anodized \/ No","offer_id":67665415602477,"sku":"sku-41345176830046","price":89.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/IMG_2399_4b495037-55d9-40f0-ae35-17d2239b5b61.webp?v=1792376568"},{"product_id":"slr-low-profile-race-ramps-for-mazda6-split-style-for-easy-jacking","title":"SLR Low Profile Race Ramps for Mazda6 - Split-Style for Easy Jacking","description":"\u003cp\u003eThis SLR Speed part is listed for the Mazda6. Below are the details and fitment information for this part.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SLR Speed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Mazda6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eWith dimensions of 27.83\" in total length (or 15.35\" when detached), 7.87\" wide, and 3.54\" tall, SLRspeed ramps offer a lifting height of 2.6\" when the wheel is settled in the groove.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e*Sold as a pair\u003c\/li\u003e\n\u003cli\u003eEach pair weighs just 8.39 lbs, making them incredibly portable and easy to store.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SLRspeed","offers":[{"title":"Default Title","offer_id":67665413898541,"sku":"sku-41345177223262","price":72.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/IMG_2530_fa941e9f-30f4-4c74-92c2-3acc12710a0c.jpg?v=1792376568"},{"product_id":"mazda6-steering-rack-stop-set-lock-limiters","title":"Mazda6 Steering Rack Stop Set (Lock Limiters)","description":"\u003cp\u003eThis SLR Speed part is listed with its fitment details below. Below are the details and fitment information for this part.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SLR Speed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e C.XX.XX.0001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCurrently included in all SLR steering kits.\u003c\/li\u003e\n\u003cli\u003eNo need to remove inner tie-rods or trimming stops until the proper clearance is achieved. Mazda 6\u003c\/li\u003e\n\u003cli\u003e*Sold as a set of 8*\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SLRspeed","offers":[{"title":"Default Title","offer_id":67665418453293,"sku":"C.XX.XX.0001","price":17.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/DSC06331_709f5718-263d-406d-8dfe-4ff8d3334924.jpg?v=1792376639"}],"url":"https:\/\/lowerhq.com\/collections\/mazda-6-coilovers-suspension.oembed","provider":"LowerHQ","version":"1.0","type":"link"}