{"title":"Lexus ES300h \/ ES350 XZ10 Coilovers \u0026 Suspension","description":"\u003cp\u003eCoilovers and suspension for the Lexus ES300h, ES350, ES250, ES300 (XZ10, 2019+). We list 17 parts for this chassis: 17 coilover kits, from SF Racing. Prices from $995.\u003c\/p\u003e","products":[{"product_id":"sf-racing-n2-coilovers-for-2019-lexus-es300h-xz10","title":"SF Racing N2 Coilovers for 2019+ Lexus ES300h (XZ10)","description":"\u003cp\u003eSF Racing's N2 Coilovers for the 2019+ Lexus ES300h (XZ10) add external reservoirs and 2-way damping adjustment for drivers who want finer control over how the car rides and handles.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2019+ Lexus ES300h\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 18.3 kg\/mm (about 1025 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Rebound and compression are adjusted separately (2-way), so you can tune how the car settles over bumps independently from how it reacts to them. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to dedicated track, time attack and serious street builds where finer damping control is worth the extra cost.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES300h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN2 External Reservoir Coilovers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656162476333,"sku":"SF-LE04-12-N2","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-2019-lexus-es300h-xz10-sf-le04-12-n2-1194305963.jpg?v=1792164004"},{"product_id":"sf-racing-n2-coilovers-for-2019-lexus-es300-xz10","title":"SF Racing N2 Coilovers for 2019+ Lexus ES300 (XZ10)","description":"\u003cp\u003eThe N2 is the top of SF Racing's coilover range: external-reservoir dampers with separate rebound and compression adjustment, here built for the 2019+ Lexus ES300 (XZ10).\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2019+ Lexus ES300\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 18.3 kg\/mm (about 1025 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for high-performance builds that have outgrown 1-way adjustable coilovers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN2 External Reservoir Coilovers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656162836781,"sku":"SF-LE04-12-N2_02","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-2019-lexus-es300-xz10-sf-le04-12-n2-02-1194305891.jpg?v=1792164008"},{"product_id":"sf-racing-n2-coilovers-for-2019-lexus-es260-xz10","title":"SF Racing N2 Coilovers for 2019+ Lexus ES260 (XZ10)","description":"\u003cp\u003eSF Racing's N2 Coilovers for the 2019+ Lexus ES260 (XZ10) add external reservoirs and 2-way damping adjustment for drivers who want finer control over how the car rides and handles.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2019+ Lexus ES260\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 18.3 kg\/mm (about 1025 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for experienced drivers who want to tune rebound and compression separately.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN2 External Reservoir Coilovers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656162935085,"sku":"SF-LE04-12-N2_03","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-2019-lexus-es260-xz10-sf-le04-12-n2-03-1194305937.jpg?v=1792164009"},{"product_id":"sf-racing-n2-coilovers-for-2019-lexus-es250-xz10","title":"SF Racing N2 Coilovers for 2019+ Lexus ES250 (XZ10)","description":"\u003cp\u003eSF Racing's N2 Coilovers for the 2019+ Lexus ES250 (XZ10) add external reservoirs and 2-way damping adjustment for drivers who want finer control over how the car rides and handles.\u003c\/p\u003e\n\u003ch3\u003e2019+ Lexus ES250 setup details\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 52mm front and 46mm rear. It comes with 18.3 kg\/mm (about 1025 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for experienced drivers who want to tune rebound and compression separately.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN2 External Reservoir Coilovers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656163262765,"sku":"SF-LE04-12-N2_04","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-2019-lexus-es250-xz10-sf-le04-12-n2-04-1194305956.jpg?v=1792164013"},{"product_id":"sf-racing-n2-coilovers-for-2019-lexus-es200-xz10","title":"SF Racing N2 Coilovers for 2019+ Lexus ES200 (XZ10)","description":"\u003cp\u003eFor a serious build on the 2019+ Lexus ES200 (XZ10), the SF Racing N2 kit combines external-reservoir dampers, 2-way adjustment and full ride height adjustment.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2019+ Lexus ES200\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 52mm front and 46mm rear. It comes with 18.3 kg\/mm (about 1025 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to dedicated track, time attack and serious street builds where finer damping control is worth the extra cost.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN2 External Reservoir Coilovers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656163492141,"sku":"SF-LE04-12-N2_05","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-2019-lexus-es200-xz10-sf-le04-12-n2-05-1194305984.jpg?v=1792164016"},{"product_id":"sf-racing-n2-coilovers-for-2019-lexus-es350-xz10","title":"SF Racing N2 Coilovers for 2019+ Lexus ES350 (XZ10)","description":"\u003cp\u003eThe N2 is the top of SF Racing's coilover range: external-reservoir dampers with separate rebound and compression adjustment, here built for the 2019+ Lexus ES350 (XZ10).\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 18.3 kg\/mm (about 1025 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExternal-reservoir dampers for more oil capacity and consistent damping under hard use\u003c\/li\u003e\n\u003cli\u003e2-way damping: rebound and compression adjust separately\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for high-performance builds that have outgrown 1-way adjustable coilovers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN2 External Reservoir Coilovers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656163524909,"sku":"SF-LE04-12-N2_06","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-n2-coilovers-for-2019-lexus-es350-xz10-sf-le04-12-n2-06-1194305975.jpg?v=1792164017"},{"product_id":"sf-racing-sport-coilovers-for-2019-lexus-es260-xz10","title":"SF Racing Sport Coilovers for 2019+ Lexus ES260 (XZ10)","description":"\u003cp\u003eBuilt for daily-driven cars, this SF Racing Sport kit replaces the factory struts and springs on the 2019+ Lexus ES260 (XZ10) with height-adjustable coilovers and single-knob damping adjustment.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 52mm front and 46mm rear. It comes with 8.3 kg\/mm (about 465 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for street cars that need a sensible drop and some tuning range, without going to track-level stiffness.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656210678061,"sku":"SF-LE04-12-SP_03","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2019-lexus-es260-xz10-sf-le04-12-sp-03-1194302496.jpg?v=1792164813"},{"product_id":"sf-racing-sport-coilovers-for-2019-lexus-es250-xz10","title":"SF Racing Sport Coilovers for 2019+ Lexus ES250 (XZ10)","description":"\u003cp\u003eBuilt for daily-driven cars, this SF Racing Sport kit replaces the factory struts and springs on the 2019+ Lexus ES250 (XZ10) with height-adjustable coilovers and single-knob damping adjustment.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2019+ Lexus ES250\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 8.3 kg\/mm (about 465 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for street cars that need a sensible drop and some tuning range, without going to track-level stiffness.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656213856557,"sku":"SF-LE04-12-SP_04","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2019-lexus-es250-xz10-sf-le04-12-sp-04-1194301972.jpg?v=1792164945"},{"product_id":"sf-racing-sport-coilovers-for-2019-lexus-es200-xz10","title":"SF Racing Sport Coilovers for 2019+ Lexus ES200 (XZ10)","description":"\u003cp\u003eIf you want a lower, tighter 2019+ Lexus ES200 (XZ10) without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 8.3 kg\/mm (about 465 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656213889325,"sku":"SF-LE04-12-SP_05","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2019-lexus-es200-xz10-sf-le04-12-sp-05-1194302092.jpg?v=1792164945"},{"product_id":"sf-racing-sport-coilovers-for-2019-lexus-es300h-xz10","title":"SF Racing Sport Coilovers for 2019+ Lexus ES300h (XZ10)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 2019+ Lexus ES300h (XZ10) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2019+ Lexus ES300h\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 8.3 kg\/mm (about 465 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES300h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656227651885,"sku":"SF-LE04-12-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2019-lexus-es300h-xz10-sf-le04-12-sp-1194300905.jpg?v=1792165437"},{"product_id":"sf-racing-sport-coilovers-for-2019-lexus-es350-xz10","title":"SF Racing Sport Coilovers for 2019+ Lexus ES350 (XZ10)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 2019+ Lexus ES350 (XZ10) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2019+ Lexus ES350\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 52mm front and 46mm rear. It comes with 8.3 kg\/mm (about 465 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656233484589,"sku":"SF-LE04-12-SP_06","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2019-lexus-es350-xz10-sf-le04-12-sp-06-1194300019.jpg?v=1792165571"},{"product_id":"sf-racing-sport-coilovers-for-2019-lexus-es300-xz10","title":"SF Racing Sport Coilovers for 2019+ Lexus ES300 (XZ10)","description":"\u003cp\u003eBuilt for daily-driven cars, this SF Racing Sport kit replaces the factory struts and springs on the 2019+ Lexus ES300 (XZ10) with height-adjustable coilovers and single-knob damping adjustment.\u003c\/p\u003e\n\u003ch3\u003e2019+ Lexus ES300 setup details\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 52mm front and 46mm rear. It comes with 8.3 kg\/mm (about 465 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656252653869,"sku":"SF-LE04-12-SP_02","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2019-lexus-es300-xz10-sf-le04-12-sp-02-1194299055.jpg?v=1792166239"},{"product_id":"sf-racing-track-coilovers-for-2019-lexus-es200-xz10","title":"SF Racing Track Coilovers for 2019+ Lexus ES200 (XZ10)","description":"\u003cp\u003eFor a 2019+ Lexus ES200 (XZ10) that sees track days as well as the commute, the SF Racing Track Coilovers add firmer valving on top of full height and damping adjustment.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2019+ Lexus ES200\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 8.3 kg\/mm (about 465 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for dual-duty cars that commute during the week and hit the track on weekends.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656296857901,"sku":"SF-LE04-12-TR_05","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2019-lexus-es200-xz10-sf-le04-12-tr-05-1194293403.jpg?v=1792167441"},{"product_id":"sf-racing-track-coilovers-for-2019-lexus-es300-xz10","title":"SF Racing Track Coilovers for 2019+ Lexus ES300 (XZ10)","description":"\u003cp\u003eSF Racing's Track Coilovers for the 2019+ Lexus ES300 (XZ10) use firmer, track-focused valving for drivers who want sharper response and more control, while staying usable on the street.\u003c\/p\u003e\n\u003ch3\u003e2019+ Lexus ES300 setup details\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 52mm front and 46mm rear. It comes with 8.3 kg\/mm (about 465 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to cars that do track days, autocross or spirited back-road driving, and owners who accept a firmer ride for more control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656297382189,"sku":"SF-LE04-12-TR_02","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2019-lexus-es300-xz10-sf-le04-12-tr-02-1194293382.jpg?v=1792167504"},{"product_id":"sf-racing-track-coilovers-for-2019-lexus-es250-xz10","title":"SF Racing Track Coilovers for 2019+ Lexus ES250 (XZ10)","description":"\u003cp\u003eThis is SF Racing's track-oriented coilover kit for the 2019+ Lexus ES250 (XZ10): height-adjustable, 32-way damping and valving tuned for hard driving at the circuit or on back roads.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 8.3 kg\/mm (about 465 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for dual-duty cars that commute during the week and hit the track on weekends.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656297906477,"sku":"SF-LE04-12-TR_04","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2019-lexus-es250-xz10-sf-le04-12-tr-04-1194293399.jpg?v=1792167505"},{"product_id":"sf-racing-track-coilovers-for-2019-lexus-es350-xz10","title":"SF Racing Track Coilovers for 2019+ Lexus ES350 (XZ10)","description":"\u003cp\u003eSF Racing's Track Coilovers for the 2019+ Lexus ES350 (XZ10) use firmer, track-focused valving for drivers who want sharper response and more control, while staying usable on the street.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2019+ Lexus ES350\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 8.3 kg\/mm (about 465 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for dual-duty cars that commute during the week and hit the track on weekends.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656297939245,"sku":"SF-LE04-12-TR_06","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2019-lexus-es350-xz10-sf-le04-12-tr-06-1194293379.jpg?v=1792167505"},{"product_id":"sf-racing-track-coilovers-for-2019-lexus-es300h-xz10","title":"SF Racing Track Coilovers for 2019+ Lexus ES300h (XZ10)","description":"\u003cp\u003eThis is SF Racing's track-oriented coilover kit for the 2019+ Lexus ES300h (XZ10): height-adjustable, 32-way damping and valving tuned for hard driving at the circuit or on back roads.\u003c\/p\u003e\n\u003ch3\u003e2019+ Lexus ES300h setup details\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 8.3 kg\/mm (about 465 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for dual-duty cars that commute during the week and hit the track on weekends.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-LE04-12-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2019+ Lexus ES300h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXZ10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656298365229,"sku":"SF-LE04-12-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2019-lexus-es300h-xz10-sf-le04-12-tr-1194293392.jpg?v=1792167506"},{"product_id":"godspeed-lexus-es-xz10-2019-23-adjustable-camber-rear-control-arms","title":"Godspeed Lexus ES (XZ10) 2019-23 Adjustable Camber Rear Control Arms","description":"\u003cp\u003eThis Godspeed suspension arm is listed for the Lexus ES. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Lexus ES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 9CGYF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpecial Notes: Wheel alignment is necessary after replacing arms and links. For competition and off-road use only.\u003c\/li\u003e\n\u003cli\u003eLegal Disclaimer: Please note that this product is intended for competition and show use only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662949482797,"sku":"9CGYF","price":200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/ak-066-h.jpg?v=1792349320"},{"product_id":"godspeed-lexus-es-fwd-xz10-2019-24-adjustable-toe-rear-control-arms-with-spherical-bearings","title":"Godspeed Lexus ES FWD (XZ10) 2019-24 Adjustable Toe Rear Control Arms With Spherical Bearings","description":"\u003cp\u003eGodspeed Lexus ES FWD (XZ10) 2019-24 Adjustable Toe Rear Control Arms With Spherical Bearings, listed for the Lexus ES FWD. Upgraded or replacement arms restore or correct suspension geometry, which shows up as better tire wear and a more planted car.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Lexus ES FWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrivetrain:\u003c\/strong\u003e FWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 9CGXY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpecial Notes: Wheel alignment is necessary after replacing arms and links. For competition and off-road use only.\u003c\/li\u003e\n\u003cli\u003eLegal Disclaimer: Please note that this product is intended for competition and show use only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662963409197,"sku":"9CGXY","price":180.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/ak-067-h.jpg?v=1792349682"}],"url":"https:\/\/lowerhq.com\/collections\/lexus-es300h-es350-xz10-coilovers-suspension.oembed","provider":"LowerHQ","version":"1.0","type":"link"}