{"title":"Infiniti QX50 \/ EX J50 Coilovers \u0026 Suspension","description":"\u003cp\u003eCoilovers and suspension for the Infiniti QX50, EX (J50, 2013-2017). We list 10 parts for this chassis: 8 coilover kits, 2 air strut kits, from SF Racing. Prices from $995.\u003c\/p\u003e","products":[{"product_id":"sf-racing-air-struts-for-2013-2017-infiniti-qx50-awd-j50","title":"SF Racing Air Struts for 2013-2017 Infiniti QX50 AWD (J50)","description":"\u003cp\u003eWith these SF Racing Air Struts, the 2013-2017 Infiniti QX50 (J50) can sit low for shows and still lift up for real-world roads, because each corner rides on an air spring instead of a fixed coil. This version is listed for AWD models.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eDamper bodies are 50mm front and rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for owners who want a low parked stance and practical ride height for driving.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF11-02-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2013-2017 Infiniti QX50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJ50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Strut Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656127709485,"sku":"SF-IF11-02-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-air-struts-for-2013-2017-infiniti-qx50-awd-j50-sf-if11-02-as-1194307176.jpg?v=1792163325"},{"product_id":"sf-racing-air-struts-for-2007-2013-infiniti-ex-awd-j50","title":"SF Racing Air Struts for 2007-2013 Infiniti EX AWD (J50)","description":"\u003cp\u003eWith these SF Racing Air Struts, the 2007-2013 Infiniti EX (J50) can sit low for shows and still lift up for real-world roads, because each corner rides on an air spring instead of a fixed coil. This version is listed for AWD models.\u003c\/p\u003e\n\u003ch3\u003e2007-2013 Infiniti EX setup details\u003c\/h3\u003e\u003cp\u003eDamper bodies are 50mm front and rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if you want adjustable ride height on demand rather than a fixed drop.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF11-05-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2007-2013 Infiniti EX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJ50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Strut Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656134197549,"sku":"SF-IF11-05-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-air-struts-for-2007-2013-infiniti-ex-awd-j50-sf-if11-05-as-1194306934.jpg?v=1792163388"},{"product_id":"sf-racing-track-coilovers-for-2007-2013-infiniti-ex-rwd-j50","title":"SF Racing Track Coilovers for 2007-2013 Infiniti EX RWD (J50)","description":"\u003cp\u003eFor a 2007-2013 Infiniti EX (J50) that sees track days as well as the commute, the SF Racing Track Coilovers add firmer valving on top of full height and damping adjustment. This version is listed for RWD models.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 50mm front and rear. It comes with 18.5 kg\/mm (about 1036 lb\/in) springs up front and 12 kg\/mm (about 672 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to cars that do track days, autocross or spirited back-road driving, and owners who accept a firmer ride for more control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF11-04-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2007-2013 Infiniti EX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJ50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.5 kg\/mm \/ 12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656196718893,"sku":"SF-IF11-04-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2007-2013-infiniti-ex-rwd-j50-sf-if11-04-tr-1194304134.jpg?v=1792164502"},{"product_id":"sf-racing-sport-coilovers-for-2013-2017-infiniti-qx50-rwd-j50","title":"SF Racing Sport Coilovers for 2013-2017 Infiniti QX50 RWD (J50)","description":"\u003cp\u003eBuilt for daily-driven cars, this SF Racing Sport kit replaces the factory struts and springs on the 2013-2017 Infiniti QX50 (J50) with height-adjustable coilovers and single-knob damping adjustment. This version is listed for RWD models.\u003c\/p\u003e\n\u003ch3\u003e2013-2017 Infiniti QX50 setup details\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 50mm front and rear. It comes with 18.5 kg\/mm (about 1036 lb\/in) springs up front and 12 kg\/mm (about 672 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF11-01-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2013-2017 Infiniti QX50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJ50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.5 kg\/mm \/ 12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656216576301,"sku":"SF-IF11-01-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2013-2017-infiniti-qx50-rwd-j50-sf-if11-01-sp-1194301896.jpg?v=1792165198"},{"product_id":"sf-racing-sport-coilovers-for-2007-2013-infiniti-ex-rwd-j50","title":"SF Racing Sport Coilovers for 2007-2013 Infiniti EX RWD (J50)","description":"\u003cp\u003eBuilt for daily-driven cars, this SF Racing Sport kit replaces the factory struts and springs on the 2007-2013 Infiniti EX (J50) with height-adjustable coilovers and single-knob damping adjustment. This version is listed for RWD models.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 50mm front and rear. It comes with 18.5 kg\/mm (about 1036 lb\/in) springs up front and 12 kg\/mm (about 672 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF11-04-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2007-2013 Infiniti EX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJ50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.5 kg\/mm \/ 12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656225587501,"sku":"SF-IF11-04-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2007-2013-infiniti-ex-rwd-j50-sf-if11-04-sp-1194301056.jpg?v=1792165376"},{"product_id":"sf-racing-track-coilovers-for-2013-2017-infiniti-qx50-rwd-j50","title":"SF Racing Track Coilovers for 2013-2017 Infiniti QX50 RWD (J50)","description":"\u003cp\u003eThis is SF Racing's track-oriented coilover kit for the 2013-2017 Infiniti QX50 (J50): height-adjustable, 32-way damping and valving tuned for hard driving at the circuit or on back roads. This version is listed for RWD models.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2013-2017 Infiniti QX50\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 50mm front and rear. It comes with 18.5 kg\/mm (about 1036 lb\/in) springs up front and 12 kg\/mm (about 672 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for dual-duty cars that commute during the week and hit the track on weekends.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF11-01-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2013-2017 Infiniti QX50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJ50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.5 kg\/mm \/ 12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656294367533,"sku":"SF-IF11-01-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2013-2017-infiniti-qx50-rwd-j50-sf-if11-01-tr-1194293875.jpg?v=1792167373"},{"product_id":"sf-racing-track-coilovers-for-2013-2017-infiniti-qx50-awd-j50","title":"SF Racing Track Coilovers for 2013-2017 Infiniti QX50 AWD (J50)","description":"\u003cp\u003eThis is SF Racing's track-oriented coilover kit for the 2013-2017 Infiniti QX50 (J50): height-adjustable, 32-way damping and valving tuned for hard driving at the circuit or on back roads. This version is listed for AWD models.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2013-2017 Infiniti QX50\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 50mm front and rear. It comes with 18.6 kg\/mm (about 1042 lb\/in) springs up front and 12 kg\/mm (about 672 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for dual-duty cars that commute during the week and hit the track on weekends.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF11-02-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2013-2017 Infiniti QX50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJ50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.6 kg\/mm \/ 12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656294662445,"sku":"SF-IF11-02-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2013-2017-infiniti-qx50-awd-j50-sf-if11-02-tr-1194293869.jpg?v=1792167375"},{"product_id":"sf-racing-track-coilovers-for-2007-2013-infiniti-ex-awd-j50","title":"SF Racing Track Coilovers for 2007-2013 Infiniti EX AWD (J50)","description":"\u003cp\u003eThis is SF Racing's track-oriented coilover kit for the 2007-2013 Infiniti EX (J50): height-adjustable, 32-way damping and valving tuned for hard driving at the circuit or on back roads. This version is listed for AWD models.\u003c\/p\u003e\n\u003ch3\u003e2007-2013 Infiniti EX setup details\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 50mm front and rear. It comes with 18.6 kg\/mm (about 1042 lb\/in) springs up front and 12 kg\/mm (about 672 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to cars that do track days, autocross or spirited back-road driving, and owners who accept a firmer ride for more control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF11-05-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2007-2013 Infiniti EX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJ50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.6 kg\/mm \/ 12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656305934637,"sku":"SF-IF11-05-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2007-2013-infiniti-ex-awd-j50-sf-if11-05-tr-1194292547.jpg?v=1792167716"},{"product_id":"sf-racing-sport-coilovers-for-2007-2013-infiniti-ex-awd-j50","title":"SF Racing Sport Coilovers for 2007-2013 Infiniti EX AWD (J50)","description":"\u003cp\u003eIf you want a lower, tighter 2007-2013 Infiniti EX (J50) without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings. This version is listed for AWD models.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2007-2013 Infiniti EX\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 50mm front and rear. It comes with 18.6 kg\/mm (about 1042 lb\/in) springs up front and 12 kg\/mm (about 672 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF11-05-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2007-2013 Infiniti EX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJ50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.6 kg\/mm \/ 12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656368062765,"sku":"SF-IF11-05-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2007-2013-infiniti-ex-awd-j50-sf-if11-05-sp-1194288696.jpg?v=1792170533"},{"product_id":"sf-racing-sport-coilovers-for-2013-2017-infiniti-qx50-awd-j50","title":"SF Racing Sport Coilovers for 2013-2017 Infiniti QX50 AWD (J50)","description":"\u003cp\u003eBuilt for daily-driven cars, this SF Racing Sport kit replaces the factory struts and springs on the 2013-2017 Infiniti QX50 (J50) with height-adjustable coilovers and single-knob damping adjustment. This version is listed for AWD models.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2013-2017 Infiniti QX50\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 50mm front and rear. It comes with 18.6 kg\/mm (about 1042 lb\/in) springs up front and 12 kg\/mm (about 672 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for street cars that need a sensible drop and some tuning range, without going to track-level stiffness.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF11-02-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2013-2017 Infiniti QX50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJ50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.6 kg\/mm \/ 12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum with Rubber Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656405090605,"sku":"SF-IF11-02-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2013-2017-infiniti-qx50-awd-j50-sf-if11-02-sp-1194286156.jpg?v=1792171836"}],"url":"https:\/\/lowerhq.com\/collections\/infiniti-qx50-ex-j50-coilovers-suspension.oembed","provider":"LowerHQ","version":"1.0","type":"link"}