{"title":"Infiniti JX35 \/ QX60 L50 Coilovers \u0026 Suspension","description":"\u003cp\u003eCoilovers and suspension for the Infiniti JX35, QX60 (L50, 2012-2013). We list 6 parts for this chassis: 4 coilover kits, 2 air strut kits, from SF Racing. Prices from $995.\u003c\/p\u003e","products":[{"product_id":"sf-racing-air-struts-for-2012-2013-infiniti-jx35-fwd-l50","title":"SF Racing Air Struts for 2012-2013 Infiniti JX35 FWD (L50)","description":"\u003cp\u003eThese SF Racing Air Struts for the 2012-2013 Infiniti JX35 (L50) give adjustable, on-demand ride height. They are the air suspension half of an air ride setup; you also need management to run them. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003e2012-2013 Infiniti JX35 setup details\u003c\/h3\u003e\u003cp\u003eDamper bodies are 50mm front and rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if you want adjustable ride height on demand rather than a fixed drop.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF15-01-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2012-2013 Infiniti JX35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eL50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Strut Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656108048685,"sku":"SF-IF15-01-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-air-struts-for-2012-2013-infiniti-jx35-fwd-l50-sf-if15-01-as-1194307756.jpg?v=1792163139"},{"product_id":"sf-racing-air-struts-for-2013-2020-infiniti-qx60-l50","title":"SF Racing Air Struts for 2013-2020 Infiniti QX60 (L50)","description":"\u003cp\u003eThese SF Racing Air Struts for the 2013-2020 Infiniti QX60 (L50) give adjustable, on-demand ride height. They are the air suspension half of an air ride setup; you also need management to run them.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2013-2020 Infiniti QX60\u003c\/h3\u003e\u003cp\u003eDamper bodies are 50mm front and rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if you want adjustable ride height on demand rather than a fixed drop.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF16-01-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2013-2020 Infiniti QX60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eL50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Strut Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656129839405,"sku":"SF-IF15-02-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-air-struts-for-2013-2020-infiniti-qx60-l50-sf-if15-02-as-1194307171.jpg?v=1792163336"},{"product_id":"sf-racing-sport-coilovers-for-2013-2020-infiniti-qx60-l50","title":"SF Racing Sport Coilovers for 2013-2020 Infiniti QX60 (L50)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 2013-2020 Infiniti QX60 (L50) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day.\u003c\/p\u003e\n\u003ch3\u003e2013-2020 Infiniti QX60 setup details\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 50mm front and rear. It comes with 9.7 kg\/mm (about 543 lb\/in) springs up front and 12 kg\/mm (about 672 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for street cars that need a sensible drop and some tuning range, without going to track-level stiffness.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF16-01-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2013-2020 Infiniti QX60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eL50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9.7 kg\/mm \/ 12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656206221613,"sku":"SF-IF15-02-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2013-2020-infiniti-qx60-l50-sf-if15-02-sp-1194303273.jpg?v=1792164683"},{"product_id":"sf-racing-track-coilovers-for-2012-2013-infiniti-jx35-fwd-l50","title":"SF Racing Track Coilovers for 2012-2013 Infiniti JX35 FWD (L50)","description":"\u003cp\u003eFor a 2012-2013 Infiniti JX35 (L50) that sees track days as well as the commute, the SF Racing Track Coilovers add firmer valving on top of full height and damping adjustment. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2012-2013 Infiniti JX35\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 50mm front and rear. It comes with 9.7 kg\/mm (about 543 lb\/in) springs up front and 12 kg\/mm (about 672 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to cars that do track days, autocross or spirited back-road driving, and owners who accept a firmer ride for more control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF15-01-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2012-2013 Infiniti JX35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eL50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9.7 kg\/mm \/ 12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656269922605,"sku":"SF-IF15-01-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2012-2013-infiniti-jx35-fwd-l50-sf-if15-01-tr-1194296541.jpg?v=1792166925"},{"product_id":"sf-racing-track-coilovers-for-2013-2020-infiniti-qx60-l50","title":"SF Racing Track Coilovers for 2013-2020 Infiniti QX60 (L50)","description":"\u003cp\u003eSF Racing's Track Coilovers for the 2013-2020 Infiniti QX60 (L50) use firmer, track-focused valving for drivers who want sharper response and more control, while staying usable on the street.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 50mm front and rear. It comes with 9.7 kg\/mm (about 543 lb\/in) springs up front and 12 kg\/mm (about 672 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to cars that do track days, autocross or spirited back-road driving, and owners who accept a firmer ride for more control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF16-01-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2013-2020 Infiniti QX60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eL50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9.7 kg\/mm \/ 12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656294301997,"sku":"SF-IF15-02-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2013-2020-infiniti-qx60-l50-sf-if15-02-tr-1194293830.jpg?v=1792167372"},{"product_id":"sf-racing-sport-coilovers-for-2012-2013-infiniti-jx35-fwd-l50","title":"SF Racing Sport Coilovers for 2012-2013 Infiniti JX35 FWD (L50)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 2012-2013 Infiniti JX35 (L50) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 50mm front and rear. It comes with 9.7 kg\/mm (about 543 lb\/in) springs up front and 12 kg\/mm (about 672 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-IF15-01-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2012-2013 Infiniti JX35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eL50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9.7 kg\/mm \/ 12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656435630381,"sku":"SF-IF15-01-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2012-2013-infiniti-jx35-fwd-l50-sf-if15-01-sp-1194284499.jpg?v=1792172564"}],"url":"https:\/\/lowerhq.com\/collections\/infiniti-jx35-qx60-l50-coilovers-suspension.oembed","provider":"LowerHQ","version":"1.0","type":"link"}