{"title":"Honda Odyssey Coilovers \u0026 Suspension","description":"\u003cp\u003eCoilovers, springs, sway bars, control arms and other suspension parts for the Honda Odyssey. We list 24 parts: 15 coilover kits, 4 air suspension parts, 1 spring kit, 1 sway bar part, 3 control arm, bushing and alignment parts, from SF Racing, Godspeed and Megan Racing. Each product title lists the exact years, trim and chassis code, so match those before you order.\u003c\/p\u003e","products":[{"product_id":"godspeed-honda-odyssey-rl5-2011-17-monors-coilovers-usdm-models-only","title":"Godspeed Honda Odyssey (RL5) 2011-17 MonoRS Coilovers (USDM MODELS ONLY)","description":"\u003cp\u003eGodspeed Honda Odyssey (RL5) 2011-17 MonoRS Coilovers (USDM MODELS ONLY), listed for the Honda Odyssey. A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Honda Odyssey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 9CGTI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDamping Levels: 32-Level\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment: Yes\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Front): 8 kg\/mm (448 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Rear): 14 kg\/mm (784 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Length(Front): 220 mm\u003c\/li\u003e\n\u003cli\u003eSpring Length(Rear): 200 mm\u003c\/li\u003e\n\u003cli\u003eFront Top Mount: Yes, Standard Type\u003c\/li\u003e\n\u003cli\u003eRear Top Mount: Yes, Standard Type\u003c\/li\u003e\n\u003cli\u003eSpring Inner Diameter(Front): 62 mm (2.44 inch)\u003c\/li\u003e\n\u003cli\u003eSpring Inner Diameter(Rear): 119 mm (4.69 inch)\u003c\/li\u003e\n\u003cli\u003eUser Guide: Coilover User Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSpecial Notes: Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1\/4-3\/8in).\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67651634299181,"sku":"9CGTI","price":850.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mrs1512_1.jpg?v=1792090872"},{"product_id":"godspeed-honda-odyssey-international-only-rb1-2-2003-08-monors-coilovers","title":"Godspeed Honda Odyssey International ONLY (RB1\/2) 2003-08 MonoRS Coilovers","description":"\u003cp\u003eGodspeed Honda Odyssey International ONLY (RB1\/2) 2003-08 MonoRS Coilovers, listed for the Honda Odyssey. Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Honda Odyssey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 9CGSL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDamping Levels: 32-Level\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment: Yes\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Front): 12 kg\/mm (672 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Rate(Rear): 11 kg\/mm (616 lbs\/inch)\u003c\/li\u003e\n\u003cli\u003eSpring Length(Front): 200 mm\u003c\/li\u003e\n\u003cli\u003eSpring Length(Rear): 210 mm\u003c\/li\u003e\n\u003cli\u003eFront Top Mount: Yes, Pillow Ball w\/ Camber Plate\u003c\/li\u003e\n\u003cli\u003eRear Top Mount: Yes, Standard Type\u003c\/li\u003e\n\u003cli\u003eSpring Inner Diameter(Front): 62 mm\u003c\/li\u003e\n\u003cli\u003eSpring Inner Diameter(Rear): 62 mm\u003c\/li\u003e\n\u003cli\u003eUser Guide: Coilover User Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSpecial Notes: Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1\/4-3\/8in).\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67651635773741,"sku":"9CGSL","price":850.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mrs1515_1_1.jpg?v=1792090874"},{"product_id":"megan-racing-coilover-damper-kit-street-series-for-honda-odyssey-2005-2010-mr-cdk-hod05","title":"Megan Racing Coilover Damper Kit Street Series for Honda Odyssey 2005-2010 - MR-CDK-HOD05","description":"\u003cp\u003eMegan Racing Coilover Damper Kit Street Series for Honda Odyssey 2005-2010 - MR-CDK-HOD05, listed for the 2005-2010 Honda Odyssey. A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Kit Street Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e 2005-2010 Honda Odyssey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MR-CDK-HOD05\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eListed fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2008 - 2010 Honda Odyssey DX\u003c\/li\u003e\n\u003cli\u003e2005 - 2010 Honda Odyssey EX-L, EXL, EX, LX, Touring\u003c\/li\u003e\n\u003cli\u003e2010 Honda Odyssey NHL SE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67651785130285,"sku":"0K0EY","price":899.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mr-cdk-hod05-1.jpg?v=1792094950"},{"product_id":"megan-racing-coilover-damper-kit-street-series-for-honda-odyssey-1999-2004-mr-cdk-hod98","title":"Megan Racing Coilover Damper Kit Street Series for Honda Odyssey 1999-2004 - MR-CDK-HOD98","description":"\u003cp\u003eMegan Racing Coilover Damper Kit Street Series for Honda Odyssey 1999-2004 - MR-CDK-HOD98, listed for the 1999-2004 Honda Odyssey. A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Kit Street Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e 1999-2004 Honda Odyssey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MR-CDK-HOD98\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eListed fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1999 - 2002 Honda Odyssey Cargo\u003c\/li\u003e\n\u003cli\u003e1998 - 2004 Honda Odyssey EX, LX\u003c\/li\u003e\n\u003cli\u003e2002 - 2004 Honda Odyssey EX-L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67652306534701,"sku":"0PCVR","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mr-cdk-hod98-1.jpg?v=1792095944"},{"product_id":"megan-racing-coilover-damper-kit-for-honda-odyssey-1994-1998-32-level-adjustment-mr-cdk-hod94","title":"Megan Racing Coilover Damper Kit for Honda Odyssey 1994-1998, 32-Level Adjustment MR-CDK-HOD94","description":"\u003cp\u003eThis Megan Racing coilover kit is listed with its fitment details below. A coilover kit replaces the factory spring and shock with an adjustable assembly, giving you control over stance and, on adjustable kits, damping.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MR-CDK-HOD94\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eListed fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1995 - 1998 Honda Odyssey EX, LX\u003c\/li\u003e\n\u003cli\u003e1996 - 1999 Isuzu Oasis S, LS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67652312596781,"sku":"0PCVQ","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mr-cdk-hod94-1.jpg?v=1792096766"},{"product_id":"megan-racing-coilover-damper-kit-for-honda-odyssey-2011-2017-mr-cdk-hod11","title":"Megan Racing Coilover Damper Kit for Honda Odyssey 2011-2017 - MR-CDK-HOD11","description":"\u003cp\u003eMegan Racing Coilover Damper Kit for Honda Odyssey 2011-2017 - MR-CDK-HOD11, listed for the 2011-2017 Honda Odyssey. Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e 2011-2017 Honda Odyssey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MR-CDK-HOD11\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eListed fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011 - 2017 Honda Odyssey EX-L, EX, LX, Touring Elite, Touring\u003c\/li\u003e\n\u003cli\u003e2011 - 2012 Honda Odyssey EXL\u003c\/li\u003e\n\u003cli\u003e2014 - 2017 Honda Odyssey SE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67652312760621,"sku":"0PCVP","price":899.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mr-cdk-hod11-1.jpg?v=1792096766"},{"product_id":"megan-racing-coilover-damper-kit-street-series-for-2018-2021-honda-odyssey-spring-rate-7-5kgf-mm-front-mr-cdk-hod18","title":"Megan Racing Coilover Damper Kit Street Series for 2018-2021 Honda Odyssey Spring Rate 7.5kgf\/mm Front - MR-CDK-HOD18","description":"\u003cp\u003eMegan Racing Coilover Damper Kit Street Series for 2018-2021 Honda Odyssey Spring Rate 7.5kgf\/mm Front - MR-CDK-HOD18, listed for the 2018-2021 Honda Odyssey Spring Rate 7.5kgf\/mm Front. Coilovers combine the spring and damper in one height-adjustable unit, so you set the ride height instead of living with a fixed drop.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Megan Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Kit Street Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e 2018-2021 Honda Odyssey Spring Rate 7.5kgf\/mm Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e MR-CDK-HOD18\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFeaturing 32 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension characteristics.\u003c\/li\u003e\n\u003cli\u003eSpecifications and Features: Spring Rate Front: 7.5kgf\/mm\u003c\/li\u003e\n\u003cli\u003eSpring Rate Rear: 7kgf\/mm\u003c\/li\u003e\n\u003cli\u003eInternal Construction: Monotube\u003c\/li\u003e\n\u003cli\u003eDamping Force Adjustability: 32-way Compression \u0026amp; Rebound Simultaneous\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMust Re-use Front Strut Top Mounts\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eListed fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHonda Odyssey 2018+\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Set your final ride height, then get the car aligned.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67652351885613,"sku":"1W3FQ","price":899.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/mr-cdk-hod18.jpg?v=1792097515"},{"product_id":"sf-racing-air-struts-for-1999-2004-honda-odyssey-rl1-rl2","title":"SF Racing Air Struts for 1999-2004 Honda Odyssey (RL1\/RL2)","description":"\u003cp\u003eSF Racing Air Struts replace the factory struts on the 1999-2004 Honda Odyssey MK2 (RL1\/RL2) with air-sprung units, so ride height is set with air pressure: low when parked, raised for driveways and speed bumps.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eDamper bodies are 52mm front and 46mm rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e North America only.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if you want adjustable ride height on demand rather than a fixed drop.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO07-06-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1999-2004 Honda Odyssey MK2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRL1\/RL2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Strut Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNorth America only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656092025133,"sku":"SF-HO07-06-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-air-struts-for-1999-2004-honda-odyssey-rl1-rl2-sf-ho07-06-as-1194308340.jpg?v=1792162897"},{"product_id":"sf-racing-air-struts-for-2005-2010-honda-odyssey-us-rl3-rl4","title":"SF Racing Air Struts for 2005-2010 Honda Odyssey US (RL3\/RL4)","description":"\u003cp\u003eSF Racing Air Struts replace the factory struts on the 2005-2010 Honda Odyssey MK3 (RL3\/RL4) with air-sprung units, so ride height is set with air pressure: low when parked, raised for driveways and speed bumps.\u003c\/p\u003e\n\u003ch3\u003e2005-2010 Honda Odyssey MK3 setup details\u003c\/h3\u003e\u003cp\u003eDamper bodies are 52mm front and 46mm rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e North America only.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for owners who want a low parked stance and practical ride height for driving.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO07-06-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2005-2010 Honda Odyssey MK3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRL3\/RL4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Strut Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNorth America only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656093303085,"sku":"SF-HO07-07-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-air-struts-for-2005-2010-honda-odyssey-us-rl3-rl4-sf-ho07-07-as-1194308101.jpg?v=1792162950"},{"product_id":"sf-racing-air-struts-for-2011-2017-honda-odyssey-mk4-rl5","title":"SF Racing Air Struts for 2011-2017 Honda Odyssey MK4 (RL5)","description":"\u003cp\u003eThese SF Racing Air Struts for the 2011-2017 Honda Odyssey MK4 (RL5) give adjustable, on-demand ride height. They are the air suspension half of an air ride setup; you also need management to run them.\u003c\/p\u003e\n\u003ch3\u003e2011-2017 Honda Odyssey MK4 setup details\u003c\/h3\u003e\u003cp\u003eDamper bodies are 52mm front and 50mm rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e North America only.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for owners who want a low parked stance and practical ride height for driving.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO07-08-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2011-2017 Honda Odyssey MK4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRL5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Strut Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNorth America only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656107524397,"sku":"SF-HO07-08-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-air-struts-for-2011-2017-honda-odyssey-mk4-rl5-sf-ho07-08-as-1194307775.jpg?v=1792163139"},{"product_id":"sf-racing-air-struts-for-2018-honda-odyssey-mk5-rl6","title":"SF Racing Air Struts for 2018+ Honda Odyssey MK5 (RL6)","description":"\u003cp\u003eWith these SF Racing Air Struts, the 2018+ Honda Odyssey MK5 (RL6) can sit low for shows and still lift up for real-world roads, because each corner rides on an air spring instead of a fixed coil.\u003c\/p\u003e\n\u003ch3\u003e2018+ Honda Odyssey MK5 setup details\u003c\/h3\u003e\u003cp\u003eDamper bodies are 52mm front and 50mm rear. Damping is 1-way, with one adjuster that changes rebound and compression together. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir springs in place of steel coil springs, so ride height is set with air pressure\u003c\/li\u003e\n\u003cli\u003e1-way damping adjustment (rebound and compression set together)\u003c\/li\u003e\n\u003cli\u003eAir management (compressor, tank, valves and controller) is needed to run air struts; contact us to confirm exactly what is included with this listing\u003c\/li\u003e\n\u003cli\u003eBolt-on replacement for the factory struts, unless the notes below say otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e North America only.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if you want adjustable ride height on demand rather than a fixed drop.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO07-09-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2018+ Honda Odyssey MK5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRL6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Strut Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNorth America only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656129085741,"sku":"SF-HO07-09-AS","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-air-struts-for-2018-honda-odyssey-mk5-rl6-sf-ho07-09-as-1194307050.jpg?v=1792163333"},{"product_id":"sf-racing-track-coilovers-for-1999-2004-honda-odyssey-mk2-rl1-rl2","title":"SF Racing Track Coilovers for 1999-2004 Honda Odyssey MK2 (RL1\/RL2)","description":"\u003cp\u003eFor a 1999-2004 Honda Odyssey MK2 (RL1\/RL2) that sees track days as well as the commute, the SF Racing Track Coilovers add firmer valving on top of full height and damping adjustment.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 52mm front and 46mm rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 10 kg\/mm (about 560 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e North America only.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal if body control and response matter more to you than the softest possible ride.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO07-06-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1999-2004 Honda Odyssey MK2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRL1\/RL2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNorth America only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656196653357,"sku":"SF-HO07-06-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-1999-2004-honda-odyssey-mk2-rl1-rl2-sf-ho07-06-tr-1194304097.jpg?v=1792164502"},{"product_id":"sf-racing-sport-coilovers-for-1999-2004-honda-odyssey-mk2-rl1-rl2","title":"SF Racing Sport Coilovers for 1999-2004 Honda Odyssey MK2 (RL1\/RL2)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 1999-2004 Honda Odyssey MK2 (RL1\/RL2) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 10 kg\/mm (about 560 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e North America only.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO07-06-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1999-2004 Honda Odyssey MK2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRL1\/RL2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNorth America only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656206418221,"sku":"SF-HO07-06-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-1999-2004-honda-odyssey-mk2-rl1-rl2-sf-ho07-06-sp-1194303186.jpg?v=1792164683"},{"product_id":"sf-racing-sport-coilovers-for-2018-honda-odyssey-mk5-rl6","title":"SF Racing Sport Coilovers for 2018+ Honda Odyssey MK5 (RL6)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 2018+ Honda Odyssey MK5 (RL6) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2018+ Honda Odyssey MK5\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 50mm rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e North America only.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for street cars that need a sensible drop and some tuning range, without going to track-level stiffness.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO07-09-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2018+ Honda Odyssey MK5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRL6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNorth America only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656206582061,"sku":"SF-HO07-09-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2018-honda-odyssey-mk5-rl6-sf-ho07-09-sp-1194303194.jpg?v=1792164683"},{"product_id":"sf-racing-track-coilovers-for-2005-2010-honda-odyssey-us-rl3-rl4","title":"SF Racing Track Coilovers for 2005-2010 Honda Odyssey US (RL3\/RL4)","description":"\u003cp\u003eSF Racing's Track Coilovers for the 2005-2010 Honda Odyssey MK3 (RL3\/RL4) use firmer, track-focused valving for drivers who want sharper response and more control, while staying usable on the street.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 7 kg\/mm (about 392 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e North America only.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to cars that do track days, autocross or spirited back-road driving, and owners who accept a firmer ride for more control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO07-07-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2005-2010 Honda Odyssey MK3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRL3\/RL4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNorth America only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656263106861,"sku":"SF-HO07-07-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2005-2010-honda-odyssey-us-rl3-rl4-sf-ho07-07-tr-1194297548.jpg?v=1792166676"},{"product_id":"sf-racing-track-coilovers-for-2011-2017-honda-odyssey-mk4-rl5","title":"SF Racing Track Coilovers for 2011-2017 Honda Odyssey MK4 (RL5)","description":"\u003cp\u003eSF Racing's Track Coilovers for the 2011-2017 Honda Odyssey MK4 (RL5) use firmer, track-focused valving for drivers who want sharper response and more control, while staying usable on the street.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 50mm rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 7 kg\/mm (about 392 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e North America only.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for dual-duty cars that commute during the week and hit the track on weekends.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO07-08-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2011-2017 Honda Odyssey MK4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRL5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNorth America only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656270184749,"sku":"SF-HO07-08-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2011-2017-honda-odyssey-mk4-rl5-sf-ho07-08-tr-1194296636.jpg?v=1792166925"},{"product_id":"sf-racing-track-coilovers-for-2018-honda-odyssey-mk5-rl6","title":"SF Racing Track Coilovers for 2018+ Honda Odyssey MK5 (RL6)","description":"\u003cp\u003eThis is SF Racing's track-oriented coilover kit for the 2018+ Honda Odyssey MK5 (RL6): height-adjustable, 32-way damping and valving tuned for hard driving at the circuit or on back roads.\u003c\/p\u003e\n\u003ch3\u003e2018+ Honda Odyssey MK5 setup details\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 50mm rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 6 kg\/mm (about 336 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e North America only.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to cars that do track days, autocross or spirited back-road driving, and owners who accept a firmer ride for more control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO07-09-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2018+ Honda Odyssey MK5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRL6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNorth America only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656297840941,"sku":"SF-HO07-09-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2018-honda-odyssey-mk5-rl6-sf-ho07-09-tr-1194293418.jpg?v=1792167505"},{"product_id":"sf-racing-sport-coilovers-for-2011-2017-honda-odyssey-mk4-rl5","title":"SF Racing Sport Coilovers for 2011-2017 Honda Odyssey MK4 (RL5)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 2011-2017 Honda Odyssey MK4 (RL5) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2011-2017 Honda Odyssey MK4\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 52mm front and 50mm rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 7 kg\/mm (about 392 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e North America only.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO07-08-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2011-2017 Honda Odyssey MK4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRL5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 50mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNorth America only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656437006637,"sku":"SF-HO07-08-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2011-2017-honda-odyssey-mk4-rl5-sf-ho07-08-sp-1194284424.jpg?v=1792172616"},{"product_id":"sf-racing-sport-coilovers-for-2005-2010-honda-odyssey-us-rl3-rl4","title":"SF Racing Sport Coilovers for 2005-2010 Honda Odyssey US (RL3\/RL4)","description":"\u003cp\u003eIf you want a lower, tighter 2005-2010 Honda Odyssey MK3 (RL3\/RL4) without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings.\u003c\/p\u003e\n\u003ch3\u003e2005-2010 Honda Odyssey MK3 setup details\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 10 kg\/mm (about 560 lb\/in) springs up front and 7 kg\/mm (about 392 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e North America only.\u003c\/p\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to daily drivers and weekend canyon cars where ride comfort still matters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-HO07-07-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2005-2010 Honda Odyssey MK3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRL3\/RL4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm \/ 7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNorth America only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Default Title","offer_id":67656445722925,"sku":"SF-HO07-07-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2005-2010-honda-odyssey-us-rl3-rl4-sf-ho07-07-sp-1194283664.jpg?v=1792172734"},{"product_id":"godspeed-traction-s-performance-lowering-springs-for-honda-odyssey-rl5-2011-17","title":"Godspeed Traction-S Performance Lowering Springs For Honda Odyssey (RL5) 2011-17","description":"\u003cp\u003eLooking for lowering springs for your Honda Odyssey? This Godspeed listing covers the Godspeed Traction-S Performance Lowering Springs For Honda Odyssey (RL5) 2011-17. A spring set like this lowers the car to a fixed height and tightens up body control while keeping the factory damper layout.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Honda Odyssey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 1FN98\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpecial Notes: Lowering varies by engine size, battery package, and model options.\u003c\/li\u003e\n\u003cli\u003eSpring Rate(kg\/mm): Front: 4.82\/4.77 | Rear: 16.1\/15.3\u003c\/li\u003e\n\u003cli\u003eAverage Low(Front): 1.4\"\u003c\/li\u003e\n\u003cli\u003eAverage Low(Rear): 1.2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Springs work best on dampers in good condition; plan an alignment after install.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662829060397,"sku":"1FN98","price":240.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/10a15580110605cdd5cb47aa47.jpg?v=1792346623"},{"product_id":"godspeed-honda-odyssey-rl5-2011-18-adjustable-rear-camber-arms-and-ball-joints","title":"Godspeed Honda Odyssey (RL5) 2011-18 Adjustable Rear Camber Arms And Ball Joints","description":"\u003cp\u003eGodspeed Honda Odyssey (RL5) 2011-18 Adjustable Rear Camber Arms And Ball Joints, listed for the Honda Odyssey. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Honda Odyssey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 9CGVJ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpecial Notes: FOR OFF ROAD USE ONLY! PARTS ARE INTENDED FOR RACING VEHICLES WHICH NEVER MAY BE USED ON A PUBLIC ROAD.\u003c\/li\u003e\n\u003cli\u003eLegal Disclaimer: Please note that this product is intended for competition and show use only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662951186733,"sku":"9CGVJ","price":180.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/ak-166-b.jpg?v=1792349345"},{"product_id":"godspeed-honda-odyssey-rl1-1999-04-adjustable-rear-camber-arms-with-spherical-bearings-and-ball-joints","title":"Godspeed Honda Odyssey (RL1) 1999-04 Adjustable Rear Camber Arms With Spherical Bearings And Ball Joints","description":"\u003cp\u003eGodspeed Honda Odyssey (RL1) 1999-04 Adjustable Rear Camber Arms With Spherical Bearings And Ball Joints, listed for the Honda Odyssey. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Honda Odyssey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 9CGTC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpecial Notes: FOR OFF ROAD USE ONLY! PARTS ARE INTENDED FOR RACING VEHICLES WHICH NEVER MAY BE USED ON A PUBLIC ROAD.\u003c\/li\u003e\n\u003cli\u003eLegal Disclaimer: Please note that this product is intended for competition and show use only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662951645485,"sku":"9CGTC","price":150.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/ak-142-d.jpg?v=1792349349"},{"product_id":"godspeed-honda-odyssey-rl3-2005-10-adjustable-rear-camber-arms-and-ball-joints","title":"Godspeed Honda Odyssey (RL3) 2005-10 Adjustable Rear Camber Arms And Ball Joints","description":"\u003cp\u003eLooking for suspension arms for your Honda Odyssey? This Godspeed listing covers the Godspeed Honda Odyssey (RL3) 2005-10 Adjustable Rear Camber Arms And Ball Joints. Lowering, lifting or hard driving changes suspension geometry, and arms like this are how most modified cars get their alignment back into range.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Honda Odyssey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 9CGW1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpecial Notes: FOR OFF ROAD USE ONLY! PARTS ARE INTENDED FOR RACING VEHICLES WHICH NEVER MAY BE USED ON A PUBLIC ROAD.\u003c\/li\u003e\n\u003cli\u003eLegal Disclaimer: Please note that this product is intended for competition and show use only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e Plan an alignment after installing new arms.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67662951678253,"sku":"9CGW1","price":180.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/ak-166-a.jpg?v=1792349349"},{"product_id":"godspeed-honda-odyssey-front-anti-sway-bar-adjustable-links-oe-replacement","title":"Godspeed Honda Odyssey Front Anti-Sway Bar Adjustable Links, OE Replacement","description":"\u003cp\u003eLooking for sway bar parts for your Honda Odyssey? This Godspeed listing covers the Godspeed Honda Odyssey Front Anti-Sway Bar Adjustable Links, OE Replacement. Sway bar parts are one of the most noticeable handling upgrades for the money, especially on lowered or lifted cars.\u003c\/p\u003e\u003ch3\u003eQuick facts\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Godspeed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed for:\u003c\/strong\u003e Honda Odyssey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 9CH0O\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2005-2010, 320-370 mm (12.6-14.6 inch) \/ 10mm Bolt w\/ 12mm Spacer Washer\u003c\/li\u003e\n\u003cli\u003eSpecial Notes: Can be used as universal end links if measurement matches specs that user needs.\u003c\/li\u003e\n\u003cli\u003eOverall Length(Shortest-Longest): 320-370 mm (12.6-14.6 in.)\u003c\/li\u003e\n\u003cli\u003eConfiguration Type: Horizontal\u003c\/li\u003e\n\u003cli\u003eLink Type: Ball Joint\u003c\/li\u003e\n\u003cli\u003eAdjustment Allow: Yes, On\/Off The Car\u003c\/li\u003e\n\u003cli\u003e2011-2017, 310-370 MM (12-3\/16 TO 14.5\/8 INCH) \/ 10mm Bolt w\/ 12mm Spacer Washer\u003c\/li\u003e\n\u003cli\u003eOverall Length(Shortest-Longest): 310-370 MM (12-3\/16 TO 14.5\/8 INCH)\u003c\/li\u003e\n\u003cli\u003e2011-2017, 320-370 mm (12.6-14.6 inch) \/ 10mm Bolt w\/ 12mm Spacer Washer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip:\u003c\/em\u003e On lowered or lifted cars, adjustable end links keep the bar at the right angle.\u003c\/p\u003e","brand":"FR SPORT","offers":[{"title":"2005-2010, 320-370 mm (12.6-14.6 inch) \/ 10mm Bolt w\/ 12mm Spacer Washer","offer_id":67663016722733,"sku":"9CH0O","price":70.0,"currency_code":"USD","in_stock":false},{"title":"2011-2017, 310-370 MM (12-3\/16 TO 14.5\/8 INCH) \/ 10mm Bolt w\/ 12mm Spacer Washer","offer_id":67663016755501,"sku":"9CH0P","price":70.0,"currency_code":"USD","in_stock":false},{"title":"2011-2017, 320-370 mm (12.6-14.6 inch) \/ 10mm Bolt w\/ 12mm Spacer Washer","offer_id":67663016788269,"sku":"9CH0Q","price":70.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sb-tr-270_d_1_2_1_1_1_1_1.jpg?v=1792350438"}],"url":"https:\/\/lowerhq.com\/collections\/honda-odyssey-coilovers-suspension.oembed","provider":"LowerHQ","version":"1.0","type":"link"}