{"title":"Fiat 500 \/ 500C 312 Coilovers \u0026 Suspension","description":"\u003cp\u003eCoilovers and suspension for the Fiat 500, 500C, 500e, 500 Abarth (312, 2007-2015). We list 8 parts for this chassis: 8 coilover kits, from SF Racing. Prices from $995.\u003c\/p\u003e","products":[{"product_id":"sf-racing-track-coilovers-for-2011-2019-fiat-500-abarth-312","title":"SF Racing Track Coilovers for 2011-2019 Fiat 500 Abarth (312)","description":"\u003cp\u003eFor a 2011-2019 Fiat 500 Abarth (312) that sees track days as well as the commute, the SF Racing Track Coilovers add firmer valving on top of full height and damping adjustment. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003e2011-2019 Fiat 500 Abarth (312) setup details\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 6.5 kg\/mm (about 364 lb\/in) springs up front and 3 kg\/mm (about 168 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to cars that do track days, autocross or spirited back-road driving, and owners who accept a firmer ride for more control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-FI06-04-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2011-2019 Fiat 500 Abarth (312)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.5 kg\/mm \/ 3 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Front: 6.5K \/ Rear: 3K","offer_id":67656200061229,"sku":"SF-FI06-04-TR","price":1095.0,"currency_code":"USD","in_stock":true},{"title":"Front: 6K \/ Rear: 3K","offer_id":67656200093997,"sku":"SF-FI06-04-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2011-2019-fiat-500-abarth-312-1194303956.jpg?v=1792164567"},{"product_id":"sf-racing-track-coilovers-for-2009-2019-fiat-500c-312","title":"SF Racing Track Coilovers for 2009-2019 Fiat 500C (312)","description":"\u003cp\u003eThis is SF Racing's track-oriented coilover kit for the 2009-2019 Fiat 500C (312): height-adjustable, 32-way damping and valving tuned for hard driving at the circuit or on back roads. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 6.5 kg\/mm (about 364 lb\/in) springs up front and 3 kg\/mm (about 168 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit for dual-duty cars that commute during the week and hit the track on weekends.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-FI06-02-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2009-2019 Fiat 500C (312)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.5 kg\/mm \/ 3 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Front: 6.5K \/ Rear: 3K","offer_id":67656200225069,"sku":"SF-FI06-02-TR","price":1095.0,"currency_code":"USD","in_stock":true},{"title":"Front: 6K \/ Rear: 3K","offer_id":67656200257837,"sku":"SF-FI06-02-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2009-2019-fiat-500c-312-1194303963.jpg?v=1792164567"},{"product_id":"sf-racing-track-coilovers-for-2007-2015-fiat-500-312","title":"SF Racing Track Coilovers for 2007-2015 Fiat 500 (312)","description":"\u003cp\u003eThis is SF Racing's track-oriented coilover kit for the 2007-2015 Fiat 500 (312): height-adjustable, 32-way damping and valving tuned for hard driving at the circuit or on back roads. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003e2007-2015 Fiat 500 setup details\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 6.5 kg\/mm (about 364 lb\/in) springs up front and 3 kg\/mm (about 168 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal if body control and response matter more to you than the softest possible ride.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-FI06-01-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2007-2015 Fiat 500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.5 kg\/mm \/ 3 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Front: 6.5K \/ Rear: 3K","offer_id":67656266318125,"sku":"SF-FI06-01-TR","price":1095.0,"currency_code":"USD","in_stock":true},{"title":"Front: 6K \/ Rear: 3K","offer_id":67656266350893,"sku":"SF-FI06-01-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2007-2015-fiat-500-312-1194297167.jpg?v=1792166753"},{"product_id":"sf-racing-track-coilovers-for-2013-2019-fiat-500e-312","title":"SF Racing Track Coilovers for 2013-2019 Fiat 500e (312)","description":"\u003cp\u003eSF Racing's Track Coilovers for the 2013-2019 Fiat 500e (312) use firmer, track-focused valving for drivers who want sharper response and more control, while staying usable on the street. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003e2013-2019 Fiat 500e setup details\u003c\/h3\u003e\u003cp\u003eUp front it is a true coilover; the rear keeps a divorced layout, with the spring and shock mounted separately like the factory setup. Damper bodies are 52mm front and 46mm rear. It comes with 6.5 kg\/mm (about 364 lb\/in) springs up front and 3 kg\/mm (about 168 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eSAE9254 cold-wound springs\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil (20W)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eBest suited to cars that do track days, autocross or spirited back-road driving, and owners who accept a firmer ride for more control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-FI06-03-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2013-2019 Fiat 500e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrack Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.5 kg\/mm \/ 3 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Front: 6K \/ Rear: 3K","offer_id":67656273199405,"sku":"SF-FI06-03-TR","price":1095.0,"currency_code":"USD","in_stock":true},{"title":"Front: 6.5K \/ Rear: 3K","offer_id":67656273232173,"sku":"SF-FI06-03-TR","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-track-coilovers-for-2013-2019-fiat-500e-312-1194296207.jpg?v=1792167004"},{"product_id":"sf-racing-sport-coilovers-for-2011-2019-fiat-500-abarth-312","title":"SF Racing Sport Coilovers for 2011-2019 Fiat 500 Abarth (312)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 2011-2019 Fiat 500 Abarth (312) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003e2011-2019 Fiat 500 Abarth (312) setup details\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 6.5 kg\/mm (about 364 lb\/in) springs up front and 3 kg\/mm (about 168 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube damper design for better heat control and fewer leaks\u003c\/li\u003e\n\u003cli\u003e32 damping settings on a single knob that sets rebound and compression together\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eAnodized T6-6061 aluminum top mounts, spring perches and collars for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-FI06-04-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2011-2019 Fiat 500 Abarth (312)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.5 kg\/mm \/ 3 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Front: 6.5K \/ Rear: 3K","offer_id":67656408105261,"sku":"SF-FI06-04-SP","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Front: 6K \/ Rear: 3K","offer_id":67656408138029,"sku":"SF-FI06-04-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2011-2019-fiat-500-abarth-312-1194285866.jpg?v=1792171863"},{"product_id":"sf-racing-sport-coilovers-for-2013-2019-fiat-500e-312","title":"SF Racing Sport Coilovers for 2013-2019 Fiat 500e (312)","description":"\u003cp\u003eIf you want a lower, tighter 2013-2019 Fiat 500e (312) without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eThe front uses true coilovers, while the rear stays divorced (separate spring and shock), matching how the car is built from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 6.5 kg\/mm (about 364 lb\/in) springs up front and 3 kg\/mm (about 168 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-FI06-03-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2013-2019 Fiat 500e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.5 kg\/mm \/ 3 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Front: 6K \/ Rear: 3K","offer_id":67656434417965,"sku":"SF-FI06-03-SP","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Front: 6.5K \/ Rear: 3K","offer_id":67656434450733,"sku":"SF-FI06-03-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2013-2019-fiat-500e-312-1194284727.jpg?v=1792172539"},{"product_id":"sf-racing-sport-coilovers-for-2009-2019-fiat-500c-312","title":"SF Racing Sport Coilovers for 2009-2019 Fiat 500C (312)","description":"\u003cp\u003eIf you want a lower, tighter 2009-2019 Fiat 500C (312) without a harsh ride, the SF Racing Sport Coilovers are made for that job: street use, adjustable height and 32 damping settings. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 6.5 kg\/mm (about 364 lb\/in) springs up front and 3 kg\/mm (about 168 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustable ride height, roughly 1 to 2.5 inches below factory per SF Racing, while keeping suspension travel\u003c\/li\u003e\n\u003cli\u003eIndependent lower mount adjustment keeps spring preload and damper travel where they should be when you change height\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eA good fit if the car is driven on the street most of the time and you want a lower stance with better body control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-FI06-02-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2009-2019 Fiat 500C (312)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.5 kg\/mm \/ 3 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Front: 6.5K \/ Rear: 3K","offer_id":67656438022445,"sku":"SF-FI06-02-SP","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Front: 6K \/ Rear: 3K","offer_id":67656438055213,"sku":"SF-FI06-02-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2009-2019-fiat-500c-312-1194284182.jpg?v=1792172620"},{"product_id":"sf-racing-sport-coilovers-for-2007-2015-fiat-500-312","title":"SF Racing Sport Coilovers for 2007-2015 Fiat 500 (312)","description":"\u003cp\u003eSF Racing's Sport Coilovers for the 2007-2015 Fiat 500 (312) are a street-focused kit: they lower the car, let you set the exact ride height and give you damping adjustment while keeping a ride that works every day. This version is listed for FWD models.\u003c\/p\u003e\n\u003ch3\u003eHow this kit is set up for the 2007-2015 Fiat 500\u003c\/h3\u003e\u003cp\u003eExpect true coilovers at the front and a divorced rear, where the spring and damper sit in separate locations as they do from the factory. Damper bodies are 52mm front and 46mm rear. It comes with 6.5 kg\/mm (about 364 lb\/in) springs up front and 3 kg\/mm (about 168 lb\/in) at the rear. Damping is 1-way: a single knob with 32 settings changes rebound and compression together, which keeps tuning quick. The front top mounts are aluminum with rubber bushings, with aluminum camber plates with pillowball bushings available as an option.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonotube dampers, which shed heat well and hold their damping under hard use\u003c\/li\u003e\n\u003cli\u003e32-level damping adjustment, rebound and compression combined on one adjuster\u003c\/li\u003e\n\u003cli\u003eCold-wound SAE9254 spring steel\u003c\/li\u003e\n\u003cli\u003eNOK seals and Italian IP damping oil\u003c\/li\u003e\n\u003cli\u003eBuilt-in dust boots and bump stops\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications, unless the notes below say otherwise\u003c\/li\u003e\n\u003cli\u003eRide height lowers roughly 1 to 2.5 inches below stock (SF Racing's figure) without giving up suspension travel\u003c\/li\u003e\n\u003cli\u003eSeparate lower-mount (length) adjustment, so height changes don't preload the spring\u003c\/li\u003e\n\u003cli\u003eT6-6061 aluminum hardware (top mounts, perches and collars), anodized against corrosion\u003c\/li\u003e\n\u003cli\u003eZinc-plated shock bodies for rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho it suits\u003c\/h3\u003e\u003cp\u003eIdeal for street cars that need a sensible drop and some tuning range, without going to track-level stiffness.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-FI06-01-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2007-2015 Fiat 500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrivetrain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSport Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-Way: Rebound and Compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamper size (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e52mm diameter \/ 46mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpring rate (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.5 kg\/mm \/ 3 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign (front \/ rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover \/ Divorced (Separate shock and spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard: Aluminum with Rubber Bushings \/ Optional: Aluminum Camber Plates with Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTop mounts (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SPRINGRATES®","offers":[{"title":"Front: 6.5K \/ Rear: 3K","offer_id":67656442282285,"sku":"SF-FI06-01-SP","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Front: 6K \/ Rear: 3K","offer_id":67656442315053,"sku":"SF-FI06-01-SP","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0964\/8295\/1469\/files\/sf-racing-sport-coilovers-for-2007-2015-fiat-500-312-1194283996.jpg?v=1792172677"}],"url":"https:\/\/lowerhq.com\/collections\/fiat-500-500c-312-coilovers-suspension.oembed","provider":"LowerHQ","version":"1.0","type":"link"}